DOI QR코드

DOI QR Code

Effects of temperature on the evolution of stresses at the stem cement interface

  • Kaci, Djafar Ait (Laboratory of Physics and Mechanical Materials (LMPM), University Djillali Liabes of Sidi Bel Abbes) ;
  • Moulgada, Abdelmadjid (Laboratory of Physics and Mechanical Materials (LMPM), University Djillali Liabes of Sidi Bel Abbes) ;
  • Achache, Habib (Laboratory of Physics and Mechanical Materials (LMPM), University Djillali Liabes of Sidi Bel Abbes) ;
  • Bounoua, Noureddine (Laboratory of Physics and Mechanical Materials (LMPM), University Djillali Liabes of Sidi Bel Abbes)
  • Received : 2018.09.25
  • Accepted : 2019.03.04
  • Published : 2019.07.25

Abstract

The insertion of femoral implants is the most important phase for surgeons, given the characteristics of the cement during its mixing phase, generating residual stresses of thermal origin that increase the different stresses induced in the bone cement. The aim of our study is to determine the different stresses that affect the cement and more particularly at the cement-implant interface for different temperatures, and to make a comparison with the cement at ambient temperature. It was concluded that, there are a large concentration of stresses in the proximal part of the cement. For normal stresses, the bone cement is affected by stresses of tension and compression due to the effect of polymerization and the contraction of the cement.

Keywords

References

  1. Perez, M.A, Grasa, J., Garcia Aznar, J.M., Bea, J.A. and Doblare, M. (2006), "Probabilistic analysis of the influence of the bonding degree of the stem-cement interface in the performance of cemented hip prostheses", J. Biomech., 39(10), 1859-1872. https://doi.org/10.1016/j.jbiomech.2005.05.025.
  2. Belkoff, S.M. and Molloy, S. (2003), "Temperature measurement during polymerization of polymethyl methacrylate cement used for vertebroplasty", Spine, 28(14), 1555-1559. https://doi.org/10.1097/01.BRS.0000076829.54235.9F.
  3. Baroud, G., Samara, M. and Steffen, T. (2004), "Influence of mixing method on the cement temperature mixing time history and doughing time of three acrylic cements for vertebroplasty", J. Biomed. Mater. Res. B Appl. Biomater., 68(1), 112-116. https://doi.org/10.1002/jbm.b.20009.
  4. Ahmed, A.M., Burke, D.L. and Miller, J. (1982), "Transient and residual stresses and displacements in selfcuring bone cement, Part 2: Thermoelastic analysis of the stem fixation system", J. Biomech. Eng., 104(1), 28-37. https://doi.org/10.1115/1.3138300.
  5. Ricker, A., Liu-Snyder, P. and Webster, T.J. (2008), "The influence of nano MgO and $BaSO_4$ particle size additives on properties of PMMA bone cement", J. Nanomedicine, 3(1), 125-132. https://doi.org/10.2217/17435889.3.1.125
  6. Iesaka, K., Jaffe, W.L. and Kummer, F.J. (2004), "Effects of the initial temperature of acrylic bone cement liquid mono mer on the properties of the stem-cement interface and cement polymerization", J. Biomedical Mater. Res. B Appl. Biomater., 68B(2), 186-190. https://doi.org/10.1002/jbm.b.20020.
  7. Li, C., Mason, J. and Yakimicki, D. (2004), "Thermal characterization of PMMA-based bone cement curing", J. Mater. Sci. Mater. Med. 15, 85-89. https://doi.org/10.1023/B:JMSM.0000010101.45352.d1.
  8. Serbetci, K., Korkusuz, F. and Hasirci, N. (2004), "Thermal and mechanical properties of hydroxyapatite impregnated acrylic bone cements", Polym Test., 23, 145-155. https://doi.org/10.1016/S0142-9418(03)00073-4.
  9. Tunney, M.M., Brady, A.J., Buchanan, F., Newe, C. and Dunne, N.J. (2007), "Incorporation of chitosan in acrylic bone cement: effect on antibiotic release, bacterial biofilm formation and mechanical properties", the 21st European Conference on Biomaterials, Brighton, United Kingdom, September.
  10. Hong, R.Y., Fu, H.P., Zhang, Y.J., Liu, L., Wang, J., Li, H.Z. and Zheng, Y. (2007), "Surface-modified silica nanoparticles for reinforcement of PMMA", J. Appl. Polym. Sci., 105(4), 2176-2184. https://doi.org/10.1002/app.26164.
  11. Ricker, A., Liu-Snyder, P. and Webster, T.J. (2008), "The influence of nano MgO and $BaSO_4$ particle size additives on properties of PMMA bone cement", J. Nanomedicine, 3(1), 125-132. https://doi.org/10.2217/17435889.3.1.125
  12. Gillani, R., Ercan, B., Qiao, A. and Webster, T. (2010), "Nanofunctionalized zirconia and barium sulfate particles as bone cement additives", J. Nanomedicine, 5, 1-11. https://doi.org/10.2217/nnm.09.99
  13. Lai, P.L., Tai, C.L., Chu, I.M., Fu, T.S., Chen, L.H. and Chen, W.J. (2012), "Hypothermic manipulation of bone cement can extend the handling time during Vertebroplasty", BMC Musculoskeletal Disorders, 13(1),198. https://doi.org/10.1186/1471-2474-13-198.
  14. Tai, C.L., Chen, Y.L. and Chen, S.Y. (2014), "Temperature control of bone cement for enhancing applicability and safety in vertebroplasty", Appl. Mech. Mater., 684, 395-399. https://doi.org/10.4028/www.scientific.net/AMM.684.395.
  15. Whitehouse, M.R., Atwal, N.S., Pabbruwe, M., Blom, A.W. and Bannister, G.C. (2014), "Osteonecrosis with the use of polymethylmethacrylate cement for hip replacement: thermal-induced damage evidenced in vivo by decreased osteocyte viability", Eur. Cell Mater., 27, 50-62. https://doi.org/10.22203/eCM.v027a05.
  16. Baker, R., Whitehouse, M., Kilshaw, M., Pabbruwe, M., Spencer, R., Blom, A. and Bannister, G. (2011), "Maximum temperatures of $89^{\circ}C$ recorded during the mechanical preparation of 35 femoral heads for resurfacing", Acta Orthop., 82(6), 669-673. https://doi.org/10.3109/17453674.2011.636681.
  17. Gundapaneni, D. and Goswami, T. (2014), "Thermal isotherms in PMMA and cell necrosis during total hip arthroplasty", J. Appl. Biomater. Funct. Mater., 12(3), 193-202. https://doi.org/10.5301/jabfm.5000196.
  18. Janssen, D., Srinivasan, P., Scheerlinck, T. and Verdonschot, N. (2012), "Effect of cementing technique and cement type on thermal necrosis in hip resurfacing arthroplasty--a numerical study", J. Orthop. Res., 30(3), 364-370. https://doi.org/10.1002/jor.21512
  19. Gergely, R.C., Toohey, K.S., Jones, M.E., Small, S.R. and Berend, M.E. (2016), "Towards the optimization of the preparation procedures of PMMA bone cement", J. Orthop. Res., 34(6), 915-923. https://doi.org/10.1002/jor.23100.
  20. Stolk, J., Janssen, D., Huiskes, R. and Verdonschot, N. (2007), "Finite element-based preclinical testing of cemented total hip implants", Clinical Orthopedics Related Res., 456, 138-147. https://doi.org/10.1097/BLO.0b013e31802ba491.
  21. Benbarek, S., Sahli, A., Bouziane, M.M., Bachir Bouiadjra, B. and Serier, B. (2014), "Crack Length Estimation from the Damage Modelisation around a Cavityi in the Orthopedic Cement of the Total Hip Prosthesis", Key Eng. Mater., 577-578, 345-348. https://doi.org/10.4028/www.scientific.net/KEM.577-578.345.
  22. Nuno, N. and Avanzolini, G. (2002), "Residual stresses at the stem-cement interface of an idealized cemented hip stem", J. Biomech., 35(6), 849-852. https://doi.org/10.1016/S0021-9290(02)00026-X.