Steel and Composite Structures

  • 제32권2호
  • /
  • Pages.225-237
  • /
  • 2019
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Dynamic stability and nonlinear vibration of rotating sandwich cylindrical shell with considering FG core integrated with sensor and actuator

  • Rostami, Rasoul (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Mohamadimehr, Mehdi (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Rahaghi, Mohsen Irani (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan)
  • 투고 : 2019.02.27
  • 심사 : 2019.06.12
  • 발행 : 2019.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this research, the dynamic stability and nonlinear vibration behavior of a smart rotating sandwich cylindrical shell is studied. The core of the structure is a functionally graded material (FGM) which is integrated by functionally graded piezoelectric material (FGPM) layers subjected to electric field. The piezoelectric layers at the inner and outer surfaces used as actuator and sensor, respectively. By applying the energy method and Hamilton's principle, the governing equations of sandwich cylindrical shell derived based on first-order shear deformation theory (FSDT). The Galerkin method is used to discriminate the motion equations and the equations are converted to the form of the ordinary differential equations in terms of time. The perturbation method is employed to find the relation between nonlinear frequency and the amplitude of vibration. The main objective of this research is to determine the nonlinear frequencies and nonlinear vibration control by using sensor and actuator layers. The effects of geometrical parameters, power law index of core, sensor and actuator layers, angular velocity and scale transformation parameter on nonlinear frequency-amplitude response diagram and dynamic stability of sandwich cylindrical shell are investigated. The results of this research can be used to design and vibration control of rotating systems in various industries such as aircraft, biomechanics and automobile manufacturing.

키워드

과제정보

연구 과제 주관 기관 : University of Kashan

참고문헌

  1. Akhavan Alavi, S.M., Mohammadimehr, M. and Edjtahed, S.H. (2019), "Active control of micro Reddy beam integrated with functionally graded nanocomposite sensor and actuator based on linear quadratic regulator method", Eur. J. Mech., A/Solids, 74, 449-461. https://doi.org/10.1016/j.euromechsol.2018.12.008
  2. Arefi, M. and Rahimi, G.H. (2012), "Comprehensive thermoelastic analysis of a functionally graded cylinder with different boundary conditions under internal pressure using first order shear deformation theory", Mechanika, 18(1), 5-13.
  3. Assaee, H. and Hasani, H. (2015), "Forced vibration analysis of composite cylindrical shells using spline finite strip method Forced vibration analysis of composite cylindrical shells using spline finite strip method", Thin-Wall. Struct., 97, 207-214. https://doi.org/10.1016/j.tws.2015.09.014
  4. Cao, X., Shi, L., Zhang, X. and Jiang, G. (2013), "Active control of acoustic radiation from laminated cylindrical shells integrated with a piezoelectric layer", Smart Mater. Struct., 22(6), 34-56. https://doi.org/10.1088/0964-1726/22/6/065003
  5. Chen, W.Q., Bian, Z.G., Lv, C.F. and Ding, H.J. (2004), "3D free vibration analysis of a functionally graded piezoelectric hollow cylinder filled with compressible fluid", Int. J. Solids Struct., 41, 947-964. https://doi.org/10.1016/j.ijsolstr.2003.09.036
  6. Das, A. and Karmakar, A. (2016), "Vibration Characteristics of Functionally Graded Pre-Twisted Turbo Machinery Blade with Rotational Effect", Adv. Sci. Lett., 22(1), 111-117. https://doi.org/10.1166/asl.2016.6769
  7. Das, A. and Karmakar, A. (2018), "Free vibration characteristics of functionally graded pre-twisted conical shells under rotation", J. Inst. Eng. India Ser. C, 99(6), 681-692. https://doi.org/10.1007/s40032-017-0378-6
  8. Dehghan, M., Zamani Nejad, M. and Moosaie, A. (2016), "Thermo-electro-elastic analysis of functionally graded piezoelectric shells of revolution: Governing equations and solutions for some simple cases", Int. J. Eng. Sci., 104, 34-61. https://doi.org/10.1016/j.ijengsci.2016.04.007
  9. Dey, S., Sarkar, S., Das, A., Karmakar, A. and Adhikari, S. (2014), "Effect of twist and rotation on vibration of functionally graded conical shells", Int. J. Mech. Mater. Des., 11, 425-437. https://doi.org/10.1007/s10999-014-9266-x
  10. Emdadi, M., Mohammadimehr, M. and Navi, B.R. (2019), "Free vibration of an annular sandwich plate with CNTRC facesheets and FG porous cores using Ritz method", Adv. Nano Res., Int. J., 7(2), 109-123. http://dx.doi.org/10.12989/anr.2019.7.2.109
  11. Frikha, A., Zghala, S. and Dammaka, F. (2018), "Dynamic analysis of functionally graded carbon nanotubes-reinforced plate and shell structures using a double directors finite shell element", Aerosp. Sci. Technol., 78, 438-451. https://doi.org/10.1016/j.ast.2018.04.048
  12. Ghorbanpour Arani, A., Hashemian, M., Loghman, A. and Mohammadimehr, M. (2011), "Study of dynamic stability of the double-walled carbon nanotube under axial loading embedded in an elastic medium by the energy method", J. Appl. Mech. Tech. Phys., 52(5), 815-824. https://doi.org/10.1134/S0021894411050178
  13. Ghorbanpour Arani, A., Rousta Navi, B. and Mohammadimehr, M. (2016), "Surface stress and agglomeration effects on nonlocal biaxial buckling polymeric nanocomposite plate reinforced by CNT using various approaches", Adv. Compos. Mater., 25(5), 423-441. https://doi.org/10.1080/09243046.2015.1052189
  14. Heydarpour, Y., Aghdam, M.M. and Malekzadeh, P. (2014), "Free vibration analysis of rotating functionally graded carbon nanotube-reinforced composite truncated conical shells", Compos. Struct., 117, 187-200. https://doi.org/10.1016/j.compstruct.2014.06.023
  15. Hua, L. and Lam, K.Y. (1998), "Frequency characteristics of a thin rotating cylindrical in shell using the generalized differential quadrature method", Int. J. Mech. Sci., 40(5), 443-459. https://doi.org/10.1016/S0020-7403(97)00057-X
  16. Irie, T., Yamada, G. and Kaneko, Y. (1982), "Free vibration of a conical shell with variable thickness", J. Sound Vibr., 82(1), 83-94. https://doi.org/10.1016/j.tws.2014.01.030
  17. Jafari, A.A., Khalili, S.M.R. and Tavakolian, M. (2014), "Nonlinear vibration of functionally graded cylindrical shells embedded with a piezoelectric layer", Thin-Wall. Struct., 79, 8-15. https://doi.org/10.1016/j.tws.2014.01.030
  18. Kumar, A., Chakrabarti, A. and Bhargava, P. (2013), "Vibration of laminated composites and sandwich shells based on higher order zigzag theory", Eng. Struct., 56, 880-888. https://doi.org/10.1016/j.engstruct.2013.06.014
  19. Lam, K.Y. and Qian, W. (2000), "Free vibration of symmetric angle-ply thick laminated composite cylindrical shells", Compos.: Part B, Eng., 31, 345-354. https://doi.org/10.1016/S1359-8368(99)00075-X
  20. Li, Y.S. and Pan, E. (2015), "Static bending and free vibration of a functionally graded piezoelectric micro plate based on the modified couple-stress theory", Int. J. Eng. Sci., 97, 40-59. https://doi.org/10.1016/j.ijengsci.2015.08.009
  21. Li, Q., Iu, V.P. and Kou, K.P. (2008), "Three-dimensional vibration analysis of functionally graded material sandwich plates", J. Sound Vib., 311, 498-515. https://doi.org/10.1016/j.jsv.2007.09.018
  22. Liew, K.M., He, X.Q. and Kitipornchai, S. (2004), "Finite element method for the feedback control of FGM shells in the frequency domain via piezoelectric sensors and actuators", Comput. Methods Appl. Mech. Eng., 193, 257-273. https://doi.org/10.1016/j.cma.2003.09.009
  23. Liu, Y. and Chu, F. (2012), "Nonlinear vibrations of rotating thin circular cylindrical shell", Nonlinear Dyn., 67, 1467-1479. https://doi.org/10.1007/s11071-011-0082-7
  24. Loghmani, A., Danesh, M., Keshmiri, M. and Savadi, M.M. (2015), "Theoretical and experimental study of active vibration control of a cylindrical shell using piezoelectric disks", J. Low Frequency Noise Vib. Active Control, 34(3), 269-288. https://doi.org/10.1260/0263-0923.34.3.269
  25. Malekzadeh, P. and Heydarpour, Y. (2012), "Free vibration analysis of rotating functionally graded cylindrical shells in thermal environment", Compos. Struct., 94, 2971-2981. https://doi.org/10.1016/j.compstruct.2012.04.011
  26. Mohammadimehr, M. and Shahedi, S. (2017), "High-order buckling and free vibration analysis of two types sandwich beam including AL or PVC-foam flexible core and CNTs reinforced nanocomposite face sheets using GDQM", Compos. Part B: Eng., 108, 91-107. https://doi.org/10.1016/j.compositesb.2016.09.040
  27. Mohammadimehr, M. and Mehrabi, M. (2017), "Stability and free vibration analyses of double-bonded micro composite sandwich cylindrical shells conveying fluid flow", Appl. Math. Model., 47, 685-709. https://doi.org/10.1016/j.apm.2017.03.054
  28. Mohammadimehr, M. and Alimirzaei, S. (2016), "Nonlinear static and vibration analysis of Euler-Bernoulli composite beam model reinforced by FG-SWCNT with initial geometrical imperfection using FEM", Struct. Eng. Mech., Int. J., 59(3), 431-454. http://dx.doi.org/10.12989/sem.2016.59.3.431
  29. Mohammadimehr, M. and Rahmati, A.H. (2013), "Small scale effect on electro-thermo-mechanical vibration analysis of single-walled boron nitride nanorods under electric excitation", Turkish J. Eng. Environ. Sci., 37(1), 1-15.
  30. Mohammadimehr, M., Moradi, M. and Loghman, A. (2014), "Influence of the Elastic Foundation on the Free Vibration and Buckling of Thin-Walled Piezoelectric-Based FGM Cylindrical Shells Under Combined Loadings", J. Solid Mech., 6(4), 347-365.
  31. Mohammadimehr, M., Rousta Navi, B. and Ghorbanpour Arani, A. (2015), "Surface stress effect on the nonlocal biaxial buckling and bending analysis of polymeric piezoelectric nanoplate reinforced by CNT using eshelby-mori-tanaka approach", J. Solid Mech., 7(2), 173-190.
  32. Mohammadimehr, M., Rostami, R. and Arefi, M. (2016), "Electro-elastic analysis of a sandwich thick plate considering FG core and composite piezoelectric layers on Pasternak foundation using TSDT", Steel Compos. Struct., Int. J., 20(3), 513-544. http://dx.doi.org/10.12989/scs.2016.20.3.513
  33. Mohammadimehr, M., Shahedi, S., Rousta Navi, B. (2017), "Nonlinear vibration analysis of FG-CNTRC sandwich Timoshenko beam based on modified couple stress theory subjected to longitudinal magnetic field using generalized differential quadrature method", Proceedings of the Institution of Mechanical Engineers, Part C: J. Mech. Eng. Sci., 231(20), 3866-3885. https://doi.org/10.1177/0954406216653622
  34. Mohammadimehr, M., Okhravi, S.V. and Akhavan Alavi, S.M. (2018a), "Free vibration analysis of magneto-electro-elastic cylindrical composite panel reinforced by various distributions of CNTs with considering open and closed circuits boundary conditions based on FSDT", J. Vibr. Control, 24(8), 1551-1569. https://doi.org/10.1177/1077546316664022
  35. Mohammadimehr, M., Mehrabi, M., Hadizadeh, H. and Hadizadeh, H. (2018b), "Surface and size dependent effects on static, buckling, and vibration of micro composite beam under thermo-magnetic fields based on strain gradient theory", Steel Compos. Struct., Int. J., 26(4), 513-531. http://dx.doi.org/10.12989/scs.2018.26.4.513
  36. Oh, I. and Lee, D. (2007), "Resonant frequency and instability of multi-layered microresonators with initial imperfection subject to piezoelectric loads", Microelectron Eng., 84, 1388-1392. https://doi.org/10.1016/j.mee.2007.01.103
  37. Patel, B.P., Gupta, S.S., Loknath, M.S. and Kadu, C.P. (2005), "Free vibration analysis of functionally graded elliptical cylindrical shells using higher-order theory", Compos. Struct., 69, 259-270. https://doi.org/10.1016/j.compstruct.2004.07.002
  38. Rajabi, J. and Mohammadimehr, M. (2019), "Bending analysis of a micro sandwich skew plate using extended Kantorovich method based on Eshelby-Mori-Tanaka approach", Comput. Concrete, Int. J., 23(5), 361-376. http://dx.doi.org/10.12989/cac.2019.23.5.361
  39. Razavi, H., Faramarzi Babadi, A. and Tadi Beni, Y. (2016), "Free vibration analysis of functionally graded piezoelectr ic cylindr ical nanoshell based on consistent couple stress theory", Compos. Struct., 160, 1299-1309. https://doi.org/10.1016/j.compstruct.2016.10.056
  40. Rostami, R., Irani Rahaghi, M. and Mohammadimehr, M. (2019), "Vibration control of the rotating sandwich cylindrical shell considering functionally graded core and functionally graded magneto-electro-elastic layers by using differential quadrature method", J. Sandw. Struct. Mater. https://doi.org/10.1177/1099636218824139
  41. Rouzegar, J. and Abad, F. (2015), "Free vibration analysis of FG plate with piezoelectric layers using four-variable refined plate theory", Thin-Wall. Struct., 89, 76-83. https://doi.org/10.1016/j.tws.2014.12.010
  42. Setoodeha, A.R., Shojaeea, M. and Malekzadeh, P. (2018), "Vibrational behavior of doubly curved smart sandwich shells with FG-CNTRC face sheets and FG porous core", Compos. Part B: Eng., 165, 798-822. https://doi.org/10.1016/j.compositesb.2019.01.022
  43. Sheng, G.G. and Wang, X. (2009a), "Active control of functionally graded laminated cylindrical shells", Compos. Struct., 90, 448-457. https://doi.org/10.1016/j.compstruct.2009.04.017
  44. Sheng, G.G. and Wang, X. (2009b), "Studies on dynamic behavior of functionally graded cylindrical shells with PZT layers under moving loads", J. Sound Vib., 323, 772-789. https://doi.org/10.1016/j.jsv.2009.01.017
  45. Sheng, G.G. and Wang, X. (2017), "The non-linear vibrations of rotating functionally graded cylindrical shells", Nonlinear Dyn., 87(2), 1095-1109. https://doi.org/10.1007/s11071-016-3100-y
  46. Shu, C. (1995), "An efficient approach for free vibration analysis of conical shells", Int. J. Mech. Sci., 38(9), 935-949. https://doi.org/10.1016/0020-7403(95)00096-8
  47. Sun, S., Chu, S. and Cao, D. (2012), "Vibration characteristics of thin rotating cylindrical shells with various boundary conditions", J. Sound Vib., 331, 4170-4186. https://doi.org/10.1016/j.jsv.2012.04.018
  48. Tornabene, F. (2009), "Free vibration analysis of functionally graded conical, cylindrical shell and annular plate structures with a four-parameter power-law distribution", Comput. Methods Appl. Mech. Engrg., 198, 2911-2935. https://doi.org/10.1016/j.cma.2009.04.011
  49. Tornabene, F. and Reddy, J.N. (2013), "FGM and laminated doubly-curved and degenerate shells resting on nonlinear elastic foundations: a GDQ solution for static analysis with a posteriori stress and strain recovery", J. Indian Inst. Sci., 93(4), 635-688.
  50. Tornabene, F., Liverani, A. and Caligiana, G. (2011), "FGM and laminated doubly curved shells and panels of revolution with a free-form meridian: A 2-D GDQ solution for free vibrations", Int. J. Mech. Sci., 53, 446-470. https://doi.org/10.1016/j.ijmecsci.2011.03.007
  51. Tornabene, F., Fantuzzi, N., Viola, E. and Batra, R.C. (2015a), "Stress and strain recovery for functionally graded free-form and doubly-curved sandwich shells using higher-order equivalent single layer theory", Compos. Struct., 119, 67-89. https://doi.org/10.1016/j.compstruct.2014.08.005
  52. Tornabene, F., Fantuzzi, N., Bacciocchi, M. and Viola, E. (2015b), "Effect of agglomeration on the natural frequencies of functionally graded carbon nanotube-reinforced laminated composite doubly-curved shells", Compos. Part B Eng., 89(1), 187-218. https://doi.org/10.1016/j.compositesb.2015.11.016
  53. Tornabene, F., Fantuzzi, N. and Bacciocchi, M. (2017), "Foam core composite sandwich plates and shells with variable stiffness: Effect of the curvilinear fiber path on the modal response", J. Sandw. Struct. Mater., 21(1), 320-365. https://doi.org/10.1177/1099636217693623
  54. Trabelsi, S., Frikha, A., Zghal, S. and Dammak, F. (2019), "A modified FSDT-based four nodes finite shell element for thermal buckling analysis of functionally graded plates and cylindrical shells", Eng. Struct., 178, 444-459. https://doi.org/10.1016/j.engstruct.2018.10.047
  55. Yazdani, R., Mohammadimehr, M. and Navi, B.R. (2019), "Free vibration of Cooper-Naghdi micro saturated porous sandwich cylindrical shells with reinforced CNT face sheets under magneto-hydro-thermo-mechanical loadings", Struct. Eng. Mech., Int. J., 70(3), 351-365. http://dx.doi.org/10.12989/sem.2019.70.3.351
  56. Zghal, S., Frikha, A. and Dammak, F. (2018), "Mechanical buckling analysis of functionally graded power-based and carbon nanotubes-reinforced composite plates and curved panels", Compos. Part B, 150, 165-183. https://doi.org/10.1016/j.compositesb.2018.05.037
  57. Zhang, J., Li, G. and Li, S. (2015), "Analysis of transient displacements for a ceramic-metal functionally graded cylindrical shell under dynamic thermal loading", Ceram. Int., 41, 12378-2385. https://doi.org/10.1016/j.ceramint.2015.06.070

피인용 문헌

  1. Free Vibration Analysis of Cylindrical Micro/Nano-Shell Reinforced with CNTRC Patches vol.13, pp.4, 2019, https://doi.org/10.1142/s175882512150040x