참고문헌
- F. Rodriguez-Rojas, A. L. Ortiz, F. Guiberteau, and M. Nygren, "Anomalous Oxidation Behaviour of Pressureless Liquid-Phase-Sintered SiC," J. Eur. Ceram. Soc., 31 [13] 2393-400 (2011). https://doi.org/10.1016/j.jeurceramsoc.2011.05.015
-
E. Ciudad, E. Sanchez-Gonzalez, O. Borrero-Lopez, F. Guiberteau, M. Nygren, and A. L. Ortiz, "Sliding-Wear Resistance of Ultrafine-Grained SiC Densified by Spark Plasma Sintering with
$3Y_2O_3$ +$5Al_2O_3$ or$Y_3Al_5O_{12}$ Additives," Scr. Mater., 69 [8] 598-601 (2013). https://doi.org/10.1016/j.scriptamat.2013.07.007 - Y. K. Seo, Y. W. Kim, T. Nishimura, and W. S. Seo, "High-Temperature Strength of a Thermally Conductive Silicon Carbide Ceramic Sintered with Yttria and Scandia," J. Eur. Ceram. Soc., 36 [15] 3755-60 (2016). https://doi.org/10.1016/j.jeurceramsoc.2016.02.028
- X. Guo, X. Cai, L. Zhu, L. Zhang, and H. Yang, "Preparation and Properties of SiC Honeycomb Ceramics by Pressureless Sintering Technology," J. Adv. Ceram., 3 [1] 83-8 (2014). https://doi.org/10.1007/s40145-014-0097-x
-
S. Ding, S. Zhu, Y. Zeng, and D. Jiang, "Effect of
$Y_2O_3$ Addition on the Properties of Reaction-Bonded Porous SiC Ceramics," Ceram. Int., 32 [4] 461-66 (2006). https://doi.org/10.1016/j.ceramint.2005.03.024 - M. Lopez-Alvarez, I. Pereiro, J. Serra, P. Gonzalez, and A. de Carlos, "Porous Silicon Carbide Scaffolds with Patterned Surfaces Obtained from the Sea Rush Juncus Maritimus for Tissue Engineering Applications," Int. J. Appl. Ceram. Technol., 9 [3] 486-96 (2012). https://doi.org/10.1111/j.1744-7402.2011.02659.x
- J. H. She, Z.Y. Deng, J. Daniel-Doni, and T. Ohji, "Oxidation Bonding of Porous Silicon Carbide Ceramics," J. Mater. Sci., 37 [17] 3615-22 (2002). https://doi.org/10.1023/A:1016596805717
- A. Poowancum, K. Matsumaru, and K. Ishizaki, "Low-Temperature Glass Bonding for Development of Silicon Carbide/Zirconium Tungsten Oxide Porous Ceramics with near Zero Thermal Expansion Coefficient," J. Am. Ceram. Soc., 94 [5]1354-56 (2011). https://doi.org/10.1111/j.1551-2916.2011.04520.x
- S. C. Kim, Y. W. Kim, and I. H. Song, "Processing and Properties of Glass-Bonded Silicon Carbide Membrane Supports," J. Eur. Ceram. Soc., 37 [4] 1225-32 (2017). https://doi.org/10.1016/j.jeurceramsoc.2016.11.019
- C. Bai, X. Deng, J. Li, Y. Jing, and W. Jiang, "Preparation and Properties of Mullite-Bonded Porous SiC Ceramics Using Porous Alumina as Oxide," Mater. Charact., 90 81-7 (2014). https://doi.org/10.1016/j.matchar.2014.01.016
- S. Kitaoka, T. Matsudaira, D. Yokoe, T. Kato, and M. Takata, "Oxygen Permeation Mechanism in Polycrystalline Mullite at High Temperatures," J. Am. Ceram. Soc., 100 [7] 3217-26 (2017). https://doi.org/10.1111/jace.14834
- C. Sadik, I. E. El Amrani, and A. Albizane, "Processing and Characterization of Alumina-Mullite Ceramics," J. Asian Ceram. Soc., 2 [4] 310-16 (2014). https://doi.org/10.1016/j.jascer.2014.07.006
- S. Ding, S. Zhu, Y.-P. Zeng, and D. Jiang, "Fabrication of Mullite-Bonded Porous Silicon Carbide Ceramics by in situ Reaction Bonding," J. Eur. Ceram. Soc., 27 [4] 2095-102 (2007). https://doi.org/10.1016/j.jeurceramsoc.2006.06.003
- H. Schneider, R. X. Fischer, and J. Schreuer, "Mullite: Crystal Structure and Related Properties," J. Am. Ceram. Soc., 98 [10] 2948-67 (2015). https://doi.org/10.1111/jace.13817
- A. Noviyanto and D. H. Yoon, "Rare-Earth Oxide Additives for the Sintering of Silicon Carbide," Diamond Relat. Mater., 38 124-30 (2013). https://doi.org/10.1016/j.diamond.2013.07.003
- M. M. S. Wahsh, H. E. S. Sadek, S. A. El-Aleem, and H. H. M. Darweesh, "The Effect of Microsilica and Aluminum Metal Powder on the Densification Parameters, Mechanical Properties and Microstructure of Alumina-Mullite Ceramic Composites," Adv. Mater., 4 [4] 80-4 (2015). https://doi.org/10.11648/j.am.20150404.12
- A. Dey, N. Kayal, and O. Chakrabarti, "Preparation of Mullite Bonded Porous SiC Ceramics by an Infiltration Method," J. Mater. Sci., 46 [16] 5432-38 (2011). https://doi.org/10.1007/s10853-011-5484-x
- C. Bai, Y. Li, Z. Liu, P. Liu, X. Deng, J. Li, and J. Yang, "Fabrication and Properties of Mullite-Bonded Porous SiC Membrane Supports Using Bauxite as Aluminum Source," Ceram. Int., 41 [3] 4391-400 (2015). https://doi.org/10.1016/j.ceramint.2014.11.129
- B. V. M. Kumar, J. H. Eom, Y. W. Kim, I. S. Han, and S. K. Woo, "Effect of Aluminum Source on Flexural Strength of Mullite-Bonded Porous Silicon Carbide Ceramics," J. Ceram. Soc. Jpn, 118 [1373] 13-8 (2010). https://doi.org/10.2109/jcersj2.118.13
- Z. Y. Deng, J. She, Y. Inagaki, J. F. Yang, T. Ohji, and Y. Tanaka, "Reinforcement by Crack-Tip Blunting in Porous Ceramics," J. Eur. Ceram. Soc., 24 [7] 2055-59 (2004). https://doi.org/10.1016/S0955-2219(03)00365-0
-
X. Li, L. Zheng, Y. Qian, J. Xu, and M. Li, "Effects of High Temperature Oxidation on Mechanical Properties of
$Ti_3AlC_2$ ," J. Mater. Sci. Technol., 33 [6] 596-602 (2017). https://doi.org/10.1016/j.jmst.2016.05.004 -
A. Septiadi, P. Fitriani, A. S. Sharma, and D. H. Yoon, "Low Pressure Joining of
$SiC_f$ /SiC Composites Using$Ti_3AlC_2$ or$Ti_3SiC_2$ MAX Phase Tape," J. Korean Ceram Soc., 54 [4] 340-48 (2017). https://doi.org/10.4191/kcers.2017.54.4.08 -
A. Zhou, C. Wang, and Y. Hunag, "Synthesis and Mechanical Properties of
$Ti_3AlC_2$ by Spark Plasma Sintering," J. Mater. Sci., 38 [14] 3111-15 (2003). https://doi.org/10.1023/A:1024777213910 - Japanese Industrial Standards Committee, Sintered Metal Bearing - Determination of Radial Crushing Strength, JIS Z 2507, Japanese Standard Association, Tokyo, Japan 2000.
-
X. H. Wang and Y. C. Zhou, "Oxidation Behavior of
$Ti_3AlC_2$ Powders in Flowing Air," J. Mater. Chem., 12 [9] 2781-85 (2002). https://doi.org/10.1039/b203644d - M. Shulpekov, O. K. Lepakova, V. G. Salamatov, and N. I. Afannasyev, "Advanced Structural Materials Based on the Ti-Cr-Al-C System"; pp. 1-5 in Proceedings of the Journal of Physics: Conference Series 1115-6th International Congress on Energy Fluxes and Radiation Effects, Tomsk, Russia, 2018.
- I. M. Low, Z. Oo, and B. H. O'Connor, "Effect of Atmospheres on the Thermal Stability of Aluminium Titanate," Phys. B, 385-386 502-4 (2006). https://doi.org/10.1016/j.physb.2006.05.256
- H. Schneider, J. Schreuer, and B. Hildmann, "Structure and Properties of Mullite-A Review," J. Eur. Ceram. Soc., 28 [2] 329-44 (2008). https://doi.org/10.1016/j.jeurceramsoc.2007.03.017
-
X. H. Wang and Y. C. Zhou, "Stability and Selective Oxidation of Aluminum in Nano-Laminate
$Ti_3AlC_2$ upon Heating in Argon," Chem. Mater., 15 [19] 3716-20 (2003). https://doi.org/10.1021/cm030022v -
G. M. Song, Y. T. Pei, W. G. Sloof, S. B. Li, J. Th. M. De Hosson, and S. van der Zwaag, "Early Stage of Oxidation of
$Ti_3AlC_2$ Ceramics," Mater. Chem. Phys., 112 762-68 (2008). https://doi.org/10.1016/j.matchemphys.2008.06.038 - J. H. Park, J. H. Kim, W. S. Cho, K. S. Han, and K. T. Hwang, "Fabrication and Characterization of Onggi Filter for Appropriate Water Treatment Technology," J. Korean Ceram. Soc., 54 [2] 114-20 (2017). https://doi.org/10.4191/kcers.2017.54.2.06
- H. Katsuki, E. K. Choi, W. J. Lee, U. S. Kim, K. T. Hwang, and W. S. Cho, "Eco-Friendly Self-Cooling System of Porous Onggi Ceramic Plate by Evaporation of Absorbed Water,"J. Korean Ceram. Soc., 55 [2] 153-59 (2018). https://doi.org/10.4191/kcers.2018.55.2.05
- Y. Zhou, M. Fukushima, H. Miyazaki, Y. Yoshizawa, K. Hirao, Y. Iwamoto, and K. Sato, "Preparation and Characterization of Tubular Porous Silicon Carbode Membrane Supports," J. Membr. Sci., 369 [1-2] 112-18 (2011). https://doi.org/10.1016/j.memsci.2010.11.055