References
- J. Zhang, L. Li, S. He, W. Song, Y. Fu, B. Zhang, Y. Chen, Development of a three-zone transport model for activated corrosion products analysis of Tokamak Cooling Water System, Fusion Eng. Des. 109-111 (2016) 407-410. https://doi.org/10.1016/j.fusengdes.2016.02.091
- M. Rafique, N.M. Mirza, S.M. Mirza, Kinetic study of corrosion product activity in primary coolant pipes of a typical PWR under flow rate transients and linearly increasing corrosion rates, J. Nucl. Mater. 346 (2005) 282-292. https://doi.org/10.1016/j.jnucmat.2005.07.002
- J.S. Song, H.J. Cho, M.Y. Jung, S.H. Lee, A study on the application of CRUDTRAN code in primary systems of domestic pressurized heavy-water reactors for prediction of radiation source term, Nuclear Eng. Technol. 49 (2017) 638-644. https://doi.org/10.1016/j.net.2016.11.005
- M.P. Short, The particulate nature of the crud source term in light water reactors, J. Nuc. mat. 509 (2018) 478-481. https://doi.org/10.1016/j.jnucmat.2018.07.008
- World Nuclear News, Fourth Chinese AP1000 Connected to Grid [cited 2018 17-11-2018], 2018. Available from, http://world-nuclear-news.org/Articles/Fourth-Chinese-AP1000-connected-to-grid.
- R. Loisel, V. Alexeeva, A. Zucker, D. Shropshire, Load-following with nuclear power: market effects and welfare implications, Prog. Nucl. Energy 109 (2018) 280-292. https://doi.org/10.1016/j.pnucene.2018.08.011
- E. Chajduk, A. Bojanowska-Czajka, Corrosion mitigation in coolant systems in nuclear power plants, Prog. Nucl. Energy 88 (2016) 1-9. https://doi.org/10.1016/j.pnucene.2015.11.011
- M. Rafique, N. Mirza, S. Mirza, M.J. Iqbal, Review of computer codes for modeling corrosion product transport and activity build-up in light water reactors, Nukleonika 55 (2010) 263-269.
- IAEA, Modelling of Transport of Radioactive Substances in the Primary Circuit of Water-Cooled Reactors, IAEA-TECDOC-1672, Viana, Austria, 2012.
- M. Benfarah, M. Zouiter, T. Jobert, F. Dacquait, M. Bultot, J.-B. Genin, PWR circuit contamination assessment tool. Use of OSCAR code for engineering studies at EDF, EPJ Nucl. Sci. Technol. 2 (2016) 1-5. https://doi.org/10.1051/epjn/e2015-50020-7
- Y. Fu, J. Zhang, L. Li, Y. Chen, Solubility calculation of the corrosion products in water-cooled reactors and its application in CATE code, Fusion Eng. Des. 125 (2017) 664-668. https://doi.org/10.1016/j.fusengdes.2017.05.067
- Westinghouse, AP1000 design control document, Rev. 19 (2011). https://www.nrc.gov/docs/ML1117/ML11171A500.html.
- Q. Guo, J. Zhang, S. Fang, Y. Chen, Calculation and analysis of water activation products source term in AP1000, Prog. Nucl. Energy 109 (2018) 66-73. https://doi.org/10.1016/j.pnucene.2018.07.007
- F. Deeba, A.M. Mirza, N.M. Mirza, Modeling and simulation of corrosion product activity in pressurized water reactors under power perturbations, Ann. Nucl. Energy 26 (1999) 561-578. https://doi.org/10.1016/S0306-4549(98)00087-5
- J.I. Malik, N.M. Mirza, S.M. Mirza, Time-dependent corrosion product activity in a typical PWR due to changes in coolant chemistry for long-term fuel cycles, Prog. Nucl. Energy 58 (2012) 100-107. https://doi.org/10.1016/j.pnucene.2012.03.001
- R. Nasir, S.M. Mirza, N.M. Mirza, Evaluation of corrosion product activity in a typical PWR with extended cycles and flow rate perturbations, World J. Nucl. Sci. Technol. 07 (2017) 24-34. https://doi.org/10.4236/wjnst.2017.71003
- O.N.R. Reactor, Chemistry Assessment of the Westinghouse AP1000 Reactor, Office for Nuclear Regulation, 2011. http://www.onr.org.uk/new-reactors.
- A.S. Zhilkin, E.P. Popov, Modeling transport of radioactive products of corrosion in loops with sodium coolant, At. Energ. 119 (2015) 37-45. https://doi.org/10.1007/s10512-015-0026-2
- J.B. Genin, L. Brissonneau, T. Gilardi, OSCAR-Na, A new code for simulating corrosion product contamination in SFR, Metall. Mat. Trans. E. 3E (2016) 291-298.
- J. Jia, Research on Modeling the Corrosion, Activity and Transport Proceeds in PWR Primary Circuits [Academic], Xi'an Jiaotong University, Xi'an, China, 2016.
- S. Mo, J. Jia, B. Yichen, S. Xiuqiang, D. Wang, X. Xu, Y. Xie, H. Hu, Modelling of materials corrosion inside RCS based on mixed-conduction model, September, in: Proceedings of 8th International Symposium on Symbiotic Nuclear Power Systems for 21st Century, 2016, pp. 26-28. Chengdu, China.
- F. Mahmood, H. Hu, L. Cao, Buildup and decay analysis of corrosion products activity in primary coolant loop of AP-1000, in: 26th International Conference on Nuclear Engineering London, England, 2018, pp. 22-26. July.
- F. Mahmood, H. Hu, L. Cao, Dynamic response analysis of corrosion products activity under steady state operation and Mechanical Shim based power-maneuvering transients in AP-1000, Ann. Nucl. Energy 115 (2018) 16-26. https://doi.org/10.1016/j.anucene.2018.01.009
- F. Mahmood, H. Hu, L. Cao, G. Lu, S. Ni, J. Yuan, Evaluation of activated corrosion products in primary coolant circuit of AP-1000 under grid frequency stability mode, Ann. Nucl. Energy 125 (2019) 138-147. https://doi.org/10.1016/j.anucene.2018.10.031
- EUR, Europian utility Requirements for LWR nuclear power plants, vol. 2, Revisiones Cancer (2001). http://www.europeanutilityrequirements.org