References
- K.L. Murty, I. Charit, Structural materials for Gen-IV nuclear reactors: challenges and opportunities, J. Nucl. Mater. 383 (2008) 189-195. https://doi.org/10.1016/j.jnucmat.2008.08.044
- A. Kohyama, A. Hishinuma, D.S. Gelles, R.L. Klueh, W. Dietz, K. Ehrlich, Low-activation ferritic and martensitic steels for fusion application, J. Nucl. Mater. 233-237 (1996) 138-147. https://doi.org/10.1016/S0022-3115(96)00327-3
- R.L. Klueh, J.P. Shingledecker, R.W. Swindeman, D.T. Hoelzer, Oxide dispersion-strengthened steels: a comparison of some commercial and experimental alloys, J. Nucl. Mater. 341 (2005) 103-114. https://doi.org/10.1016/j.jnucmat.2005.01.017
- V. Sagaradze, V. Shalaev, V. Arbuzov, B. Goshchitskii, Y. Tian, W. Qun, S. Jiguang, Radiation resistance and thermal creep of ODS ferritic steels, J. Nucl. Mater. 295 (2001) 265-272. https://doi.org/10.1016/S0022-3115(01)00511-6
- D.A. McClintock, M.A. Sokolov, D.T. Hoelzer, R.K. Nanstad, Mechanical properties of irradiated ODS-EUROFER and nanocluster strengthened 14YWT, J. Nucl. Mater. 392 (2009) 353-359. https://doi.org/10.1016/j.jnucmat.2009.03.024
- S. Ukai, T. Yoshitake, S. Mizuta, Y. Matsudaira, S. Hagi, T. Kobayashi, Preliminary tube manufacturing of oxide dispersion strengthened ferritic steels with recrystallized structure, J. Nucl. Sci. Technol. 36 (1999) 710-712. https://doi.org/10.1080/18811248.1999.9726259
- A. Alamo, H. Regle, G. Pons, J.L. Bechade, Microstructure and textures of ods ferritic alloys obtained by mechanical alloying, Mater. Sci. Forum 88-90 (1992) 183-190.
- H.-G. Kim, I.-H. Kim, Y.-I. Jung, D.-J. Park, J.-H. Park, J.-H. Yang, Y.-H. Koo, Microstructure and mechanical characteristics of surface oxide dispersion-strengthened Zircaloy-4 cladding tube, Addit. Manuf. 22 (2018) 75-85. https://doi.org/10.1016/j.addma.2018.05.002
- V.K. Champagne, The Cold Spray Materials Deposition Process : Fundamentals and Applications, Woodhead, 2007.
-
H. Yeom, B. Maier, G. Johnson, T. Dabney, J. Walters, K. Sridharan, Development of cold spray process for oxidation-resistant FeCrAl and Mo diffusion barrier coatings on optimized
$ZIRLO^{TM}$ , J. Nucl. Mater. 507 (2018) 306-315. https://doi.org/10.1016/j.jnucmat.2018.05.014 - B. Maier, H. Yeom, G. Johnson, T. Dabney, J. Walters, J. Romero, H. Shah, P. Xu, K. Sridharan, Development of cold spray coatings for accident-tolerant fuel cladding in light water reactors, JOM 70 (2018) 198-202. https://doi.org/10.1007/s11837-017-2643-9
- G.R. Odette, Recent progress in developing and qualifying nanostructured ferritic alloys for advanced fission and fusion applications, JOM 66 (2014) 2427-2441. https://doi.org/10.1007/s11837-014-1207-5
- S.V. Klinkov, V.F. Kosarev, M. Rein, Cold spray deposition: significance of particle impact phenomena, Aero. Sci. Technol. 9 (2005) 582-591. https://doi.org/10.1016/j.ast.2005.03.005
- D.T. Hoelzer, J. Bentley, M.A. Sokolov, M.K. Miller, G.R. Odette, M.J. Alinger, Influence of Particle Dispersions on the High-Temperature Strength of Ferritic Alloys, (n.d.).
- Standard Test Method for Microindentation Hardness of Materials 1, ASTM Int. (n.d.).
- Sample Dissolution, ASM Handb, Vol. 10, 1986, pp. 161-180.
- M.K. Miller, K.F. Russell, D.T. Hoelzer, Characterization of precipitates in MA/ODS ferritic alloys, J. Nucl. Mater. 351 (2006) 261-268. https://doi.org/10.1016/j.jnucmat.2006.02.004
- M.K. Miller, D.T. Hoelzer, E.A. Kenik, K.F. Russell, Stability of ferritic MA/ODS alloys at high temperatures, Intermetallics 13 (2005) 387-392. https://doi.org/10.1016/j.intermet.2004.07.036
- H.L. Ding, R. Gao, T. Zhang, X.P. Wang, Q.F. Fang, C.S. Liu, Annealing effect on the microstructure and magnetic properties of 14%Cr-ODS ferritic steel, Fusion Eng. Des. 100 (2015) 371-377. https://doi.org/10.1016/j.fusengdes.2015.06.149
- E.J. Pavlina, C.J. Van Tyne, Correlation of yield strength and tensile strength with hardness for steels, J. Mater. Eng. Perform. 17 (2008) 888-893. https://doi.org/10.1007/s11665-008-9225-5
- S. Ukai, M. Harada, H. Okada, M. Inoue, S. Nomura, S. Shikakura, T. Nishida, M. Fujiwara, K. Asabe, Tube manufacturing and mechanical properties of oxide dispersion strengthened ferritic steel, J. Nucl. Mater. 204 (1993) 74-80. https://doi.org/10.1016/0022-3115(93)90201-9
Cited by
- Research progress on preparation technology of oxide dispersion strengthened steel for nuclear energy vol.3, pp.3, 2019, https://doi.org/10.1088/2631-7990/abff1a