References
- International IOfSA. Additive manufacturing - general principles - terminology. In: ISO/ASTM. Geneva, Switzerland: International Organization for Standardization; 2015. ISO/ASTM 52900.
- Thomas D. Costs, benefits, and adoption of additive manufacturing: a supply chain perspective. Int J Adv Manuf Technol 2016;85(5-8):1857-76. https://doi.org/10.1007/s00170-015-7973-6
- du Preez S, Johnson AR, LeBouf RF, Linde SJL, Stefaniak AB, Du Plessis J. Exposures during industrial 3-d printing and post-processing tasks. Rapid Proto J 2018;24(5):865-71. https://doi.org/10.1108/RPJ-03-2017-0050
- Graff P, Stahlbom B, Nordenberg E, Graichen A, Johansson P, Karlsson H. Evaluating measuring techniques for occupational exposure during additive manufacturing of metals: a pilot study. J Indust Ecol 2017;21:S120-9. https://doi.org/10.1111/jiec.12498
- House R, Rajaram N, Tarlo SM. Case report of asthma associated with 3d printing. Occup Med (Lond) 2017;67(8):652-4. https://doi.org/10.1093/occmed/kqx129
- Chan FL, House R, Kudla I, Lipszyc JC, Rajaram N, Tarlo SM. Health survey of employees regularly using 3d printers. Occup Med (Lond) 2018;68(3):211-4. https://doi.org/10.1093/occmed/kqy042
- Stefaniak AB, LeBouf RF, Duling MG, Yi J, Abukabda AB, McBride CR, et al. Inhalation exposure to three-dimensional printer emissions stimulates acute hypertension and microvascular dysfunction. Toxicol Appl Pharmacol 2017;335:1-5. https://doi.org/10.1016/j.taap.2017.09.016
- Azimi P, Fazli T, Stephens B. Predicting concentrations of ultrafine particles and volatile organic compounds resulting from desktop 3d printer operation and the impact of potential control strategies. J Indust Ecol 2017;21:S107-19. https://doi.org/10.1111/jiec.12578
- Azimi P, Zhao D, Pouzet C, Crain NE, Stephens B. Emissions of ultrafine particles and volatile organic compounds from commercially available desktop three-dimensional printers with multiple filaments. Environ Sci Technol 2016;50(3):1260-8. https://doi.org/10.1021/acs.est.5b04983
- Bharti N, Singh S. Three-dimensional (3d) printers in libraries: perspective and preliminary safety analysis. J Chem Educ 2017;94(7):879-85. https://doi.org/10.1021/acs.jchemed.6b00745
- Deng Y, Cao SJ, Chen A, Guo Y. The impact of manufacturing parameters on submicron particle emissions from a desktop 3d printer in the perspective of emission reduction. Build Environ 2016;104:311-9. https://doi.org/10.1016/j.buildenv.2016.05.021
- Floyd EL, Wang J, Regens JL. Fume emissions from a low-cost 3-d printer with various filaments. J Occup Environ Hyg 2017;14(7):523-33. https://doi.org/10.1080/15459624.2017.1302587
- Geiss O, Bianchi I, Barrero-Moreno J. Lung-deposited surface area concentration measurements in selected occupational and non-occupational environments. J Aerosol Sci 2016;96:24-37. https://doi.org/10.1016/j.jaerosci.2016.02.007
- Kim Y, Yoon C, Ham S, Park J, Kim S, Kwon O, et al. Emissions of nanoparticles and gaseous material from 3d printer operation. Environ Sci Technol 2015;49(20):12044-53. https://doi.org/10.1021/acs.est.5b02805
- Kwon O, Yoon C, Ham S, Park J, Lee J, Yoo D, et al. Characterization and control of nanoparticle emission during 3d printing. Environ Sci Technol 2017;51(18):10357-68. https://doi.org/10.1021/acs.est.7b01454
- Mendes L, Kangas A, Kukko K, Molgaard B, Saamanen A, Kanerva T, et al. Characterization of emissions from a desktop 3d printer. J Indust Ecol 2017;21(S1):S94-106. https://doi.org/10.1111/jiec.12569
- Rao C, Gu F, Zhao P, Sharmin N, Gu H, Fu J. Capturing pm2.5 emissions from 3d printing via nanofiber-based air filter. Scientific Rep 2017;7(1).
- Characterization of particle emission from fuse deposition modeling printers. In: Simon TR, Aguilera GA, Zhao F, editors. ASME 2017 12th International manufacturing science and engineering conference, MSEC 2017 collocated with the JSME/ASME 2017 6th international conference on materials and processing 2017.
- Stabile L, Scungio M, Buonanno G, Arpino F, Ficco G. Airborne particle emission of a commercial 3d printer: the effect of filament material and printing temperature. Indoor Air 2017;27(2):398-408. https://doi.org/10.1111/ina.12310
- Stefaniak AB, LeBouf RF, Yi J, Ham JE, Nurkewicz TR, Schwegler-Berry DE, et al. Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional printer. J Occup Environ Hyg 2017;14:540-50. https://doi.org/10.1080/15459624.2017.1302589
- Steinle P. Characterization of emissions from a desktop 3d printer and indoor air measurements in office settings. J Occup Environ Hyg 2016;13:121-32. https://doi.org/10.1080/15459624.2015.1091957
- Stephens B, Azimi P, El Orch Z, Ramos T. Ultrafine particle emissions from desktop 3d printers. Atmos Environ 2013;79:334-9. https://doi.org/10.1016/j.atmosenv.2013.06.050
- Vance ME, Pegues V, Van Montfrans S, Leng W, Marr LC. Aerosol emissions from fuse-deposition modeling 3d printers in a chamber and in real indoor environments. Environ Sci Technol 2017;51(17):9516-23. https://doi.org/10.1021/acs.est.7b01546
- Yi J, LeBouf RF, Duling MG, Nurkiewicz TR, Chen BT, Schwegler-Berry D, et al. Emission of particulate matter from a desktop three-dimensional (3-d) printer. J Toxicol Environ Health A 2016;79:453-65. https://doi.org/10.1080/15287394.2016.1166467
- Zhang Q, Wong JPS, Davis AY, Black MS, Weber RJ. Characterization of particle emissions from consumer fused deposition modeling 3d printers. Aerosol Sci Technol 2017;51(11):1275-86. https://doi.org/10.1080/02786826.2017.1342029
- Zhou Y, Kong X, Chen A, Cao S. Investigation of ultrafine particle emissions of desktop 3d printers in the clean room. Proc Engin 2015;121:506-12. https://doi.org/10.1016/j.proeng.2015.08.1099
- Zontek TL, Ogle BR, Jankovic JT, Hollenbeck SM. An exposure assessment of desktop 3d printing. J Chem Health Saf 2017;24(2):15-25. https://doi.org/10.1016/j.jchas.2016.05.008
- Jankovic JT, Hall MA, Zontek TL, Hollenbeck SM, Ogle BR. Particle loss in a scanning mobility particle analyzer sampling extension tube. Int J Occup Environ Health 2010;16(4):429-33. https://doi.org/10.1179/oeh.2010.16.4.429
- LeBouf RF, Stefaniak AB, Virji MA. Validation of evacuated canisters for sampling volatile organic compounds in healthcare settings. J Environ Monit 2012;14(3):977-83. https://doi.org/10.1039/c2em10896h
- Cena LG, Anthony TR, Peters TM. A personal nanoparticle respiratory deposition (nrd) sampler. Environ Sci Technol 2011;45(15):6483-90. https://doi.org/10.1021/es201379a
- He C, Morawska L, Hitchins J, Gilbert D. Contribution from indoor sources to particle number and mass concentrations in residential houses. Atmos Environ 2004;38(21):3405-15. https://doi.org/10.1016/j.atmosenv.2004.03.027
- NIOSH. Niosh pocket guide to chemical hazards. Cincinnati, OH: DHHS (NIOSH) Publication; 2007. 2005-149 ed DHHS (NIOSH).
- Weschler CJ. Chemistry in indoor environments: 20 years of research. Indoor Air 2011;21(3):205-18. https://doi.org/10.1111/j.1600-0668.2011.00713.x
- Stefaniak AB, Bowers LN, Knepp AK, Virji MA, Birch EM, Ham JE, et al. Three-dimensional printing with nano-enabled filaments releases polymer particles containing carbon nanotubes into air. Indoor Air 2018.
- Wojtyla S, Klama P, Baran T. Is 3d printing safe? Analysis of the thermal treatment of thermoplastics: abs, pla, pet, and nylon. J Occup Environ Hyg 2017;14(6):D80-5. https://doi.org/10.1080/15459624.2017.1285489
- Moscato G, Biscaldi G, Cottica D, Pugliese F, Candura S, Candura F. Occupational asthma due to styrene: two case reports. J Occup Med 1987;29(12):957-60.
- Bours J, Adzima B, Gladwin S, Cabral J, Mau S. Addressing hazardous implications of additive manufacturing: complementing life cycle assessment with a framework for evaluating direct human health and environmental impacts. J Indust Ecol 2017;21(S1):S25-36. https://doi.org/10.1111/jiec.12587
- ICRP. International commission on radiological protection. Human respiratory tract model for radiological protection. Oxford, UK: Pergamon; 1994. Publication 66.
- He Z, Li G, Chen J, Huang Y, An T, Zhang C. Pollution characteristics and health risk assessment of volatile organic compounds emitted from different plastic solid waste recycling workshops. Environ Int 2015;77:85-94. https://doi.org/10.1016/j.envint.2015.01.004
- HA-International. Material safety data sheet; 2006. Available from: http://www.sfm.state.or.us/cr2k_subdb/MSDS/TECHNISET_NF_RESIN.PDF.
- HA-International. Introduction to foundry coatings; 2017. Available from: http://ha-international.com/pdf/Refractory%20Coating%20OverviewV1.pdf.
Cited by
- 3D printing of musculoskeletal tissues: impact on safety and health at work vol.82, pp.16, 2019, https://doi.org/10.1080/15287394.2019.1663458
- Nanocluster Aerosol Emissions of a 3D Printer vol.53, pp.23, 2019, https://doi.org/10.1021/acs.est.9b05317
- Particle and organic vapor emissions from children’s 3-D pen and 3-D printer toys vol.31, pp.13, 2019, https://doi.org/10.1080/08958378.2019.1705441
- Emissions associated with operations of four different additive manufacturing or 3D printing technologies vol.17, pp.10, 2019, https://doi.org/10.1080/15459624.2020.1798012
- Pulmonary and systemic toxicity in rats following inhalation exposure of 3-D printer emissions from acrylonitrile butadiene styrene (ABS) filament vol.32, pp.11, 2019, https://doi.org/10.1080/08958378.2020.1834034
- Characterization of Ultrafine Particles and VOCs Emitted from a 3D Printer vol.18, pp.3, 2021, https://doi.org/10.3390/ijerph18030929
- Large-Format Additive Manufacturing and Machining Using High-Melt-Temperature Polymers. Part I: Real-Time Particulate and Gas-Phase Emissions vol.28, pp.3, 2021, https://doi.org/10.1021/acs.chas.0c00128
- Safe-by-design strategies applied to scaffold hybrid manufacturing vol.1953, pp.1, 2019, https://doi.org/10.1088/1742-6596/1953/1/012009
- Prevention through design: insights from computational fluid dynamics modeling to predict exposure to ultrafine particles from 3D printing vol.84, pp.11, 2019, https://doi.org/10.1080/15287394.2021.1886210
- Additive Manufacturing for Occupational Hygiene: A Comprehensive Review of Processes, Emissions, & Exposures vol.24, pp.5, 2019, https://doi.org/10.1080/10937404.2021.1936319
- Particle emission levels in the user operating environment of powder, ink and filament-based 3D printers vol.27, pp.6, 2019, https://doi.org/10.1108/rpj-02-2020-0039
- Large-Format Additive Manufacturing and Machining Using High-Melt-Temperature Polymers. Part II: Characterization of Particles and Gases vol.28, pp.4, 2019, https://doi.org/10.1021/acs.chas.0c00129
- State of the art in additive manufacturing and its possible chemical and particle hazards—review vol.31, pp.6, 2019, https://doi.org/10.1111/ina.12853
- Nano- and microplastics in the workplace vol.18, pp.10, 2019, https://doi.org/10.1080/15459624.2021.1976413