그림 1. 철강슬래그 종류 및 재활용 용도
그림 2. 슬래그 발생 분포현황
그림 3. 전기로 산화슬래그 팽창 Mechanism
그림 4. 전기로 제강공정에서의 산화슬래그·환원슬래그 분급 공정
그림 5. JIS 기준 염기도와 Free-CaO 함량 관계
그림 6. JIS 기준 염기도와 콘크리트의 길이변화율과의 관계
그림 7. 나고야시 우시지마 재개발 공사 지하 변전실 매트콘크리트
그림 8. 후쿠이항 테트라포드
[표 1] 국내 전기로 산화슬래그 발생현황
[표 2] 전기로산화슬래그 품질기준 (KS F 2527)
References
- Kim, H. (2015). Application and Prospects of Iron&Steel Making Slag for Creating the High Added value in Construction Material, Korean Recycled Construction Resources institute, 10(3), 7-11[in korean]
- Ryu, D.H., Kim, K.H. (2009). The prospect for utilization of Electronic arc furnace oxidizing slag as concrete's aggregate, Korean Recycled Construction Resources institute, 4(1), 17-25[in korean]
- Korea iron & steel Association. Crude steel production in 2015
- Hisham Qasrawi, Faisal Shalabi, Ibrahim Asi. (2009). Use of low CaO unprocessed steel slag in concrete as fine aggregate, Construction and Building Materials, 23, 1118-1125 https://doi.org/10.1016/j.conbuildmat.2008.06.003
- Kim, J.M., Cho, S.H., Kwon, K.J., Kim, M.H. (2005). Experimental Study on the Engineering Properties of Radiation Shielding Concrete According to the Replacement Ratio of Rapid-Chilled Steel Slag Fine Aggregate, Architectural institute of korea, 21(3), 121-128[in korean]
- Kim, J.M. (2004). The Engineering Properties of High Strength Concrete using Rapid-Chill steel Slag, Architectural institute of korea, 24(2), 527-530[in korean]
- JIS A 5011-4. (2013). Electric arc furnace slag aggregate for concrete
- Concrete Standard Specification. (2016).
- Mun, H.y., Choi, J.J., Choi, Y.W. (1989). Fundamental Study on the Utilization of Electric Furnace Slag as a Fine Aggregate for Concrete, Korean Society of Civil Engineers, 9(2), 55-61[in korean]
- Kang, W.H., Lee, H.K., Par, J.Y. (2001). Assessment of Chemical Leachability of Electric Arc Furnace Slag Before and After Aging Treatments for Environmentally Safe Reuse, Korean Society of Civil Environmental Engineers, 23(1), 1919-1928[in korean]
- Kim, N.W., Bae, J.S. (2009). A Fundamental Study on the Characteristics of Concrete with the Substitution Ratio of the Rapidly Cooled Steel Slag, Korea Institute for Structural Maintenance and Inspection, 13(1), 78-87[in korean]
- Kwak, E.G., Kim, J.M. (2010). Evaluation of Application for the Concrete Aggregate of Electric Arc Furnace Oxidizing Slag Treated by Rapidly Cooling Method, Architectural institute of korea, 26(2), 63-70[in korean]
- Jung, Y.J., Lee, Y.H., Kim, S.W., Kim, K.H. (2012). Flexural Behavior of Reinforced Concrete Columns Using Electric Arc Furnace Oxidizing Slag Aggregates, Korea concrete Institute, 24(3), 267-273[in korean] https://doi.org/10.4334/JKCI.2012.24.3.267
- Jose, T.S.J., Inigo, V., Idoia, A., Ignacio, M. (2014). The performance of steel-making slag concretes in the hardened state, materials and design, 60, 612-619 https://doi.org/10.1016/j.matdes.2014.04.030
- A. Santamaria., A, Orbe, M.M., Losanez, M., Skaf, V., Ortega-Lopez, J.J., Gonzalez. (2017). Self-compacting concrete incorporating electric arcfurnace steelmaking slag as aggregate, Materials and design, 115, 179-193 https://doi.org/10.1016/j.matdes.2016.11.048
- M. Maslehuddin, A. M. Sharif, M. Shameem, M. Ibrahim, M. S. Barry. (2003). Comparison of properties of steel slag and crushed limestone aggregate concretes, Construction and building materials, 17, 105-112 https://doi.org/10.1016/S0950-0618(02)00095-8
- Alan Sekaran, Murthi Palaniswamy, Sivagnanaprakash Balaraju. (2015). A Study on Suitability of EAF Oxidizing Slag in Concrete: An Eco-Friendly and Sustainable Replacement for Natural Coarse Aggregate, Hindawi Publishing Corporation, 15, 179-193
- L. Rondi, G. Bregoli, S. Sorlini, L. Cominoli, C. Collivignarelli, G. Plizzari. (2016). Concrete with EAF steel slag as aggregate: A comprehensive technical and environmental characterisation, Composites Part B, 90, 195-202 https://doi.org/10.1016/j.compositesb.2015.12.022
- L. Coppoal, A. Buoso, D. Coffetti, P. Kara, S. Lorenzi. (2016). Electric arc furnace granulated slag for sustainable concrete, Construction and Building Materials, 123, 115-119 https://doi.org/10.1016/j.conbuildmat.2016.06.142
- F. Faleschini, M. A. Fernandez-Ruiz, M. A. Zanini, K. Brunelli, C. Pellegrino, E. Hernandez-Montes. (2015). High performance concrete with electric arc furnace slag as aggregate: Mechanical and durability properties, Construction and Building Materials, 101, 113-121 https://doi.org/10.1016/j.conbuildmat.2015.10.022
- 山戸 博晃, 野口 陽輔, 参納 千夏男, 鳥居 和之. (2004). 電気炉酸化スラグを使用したコンクリートの物理.化学的安定性, コンクリート工学年次論文集, 26, pp.1641- 1646
- 國府{勝郎, 四谷進. (2003). 電気炉酸化スラグ骨材の概要, 本コンクリート工学協会, 41, 3-7