DOI QR코드

DOI QR Code

꺽쇠형 강재 댐퍼의 록킹 거동

Rocking Behavior of Clamped Shape Metallic Damper

  • 이현호 (동양대학교 건축소방안전학과)
  • Lee, Hyun-Ho (Dept. of Architecture & Fire Safety, Dongyang Univ.)
  • 투고 : 2019.02.07
  • 심사 : 2019.02.24
  • 발행 : 2019.06.15

초록

This study proposes a technique to dissipate the energy of a rocking wall installed on a frame by using a metallic damper. The rocking behavior is to turn left and right about the wall vertical axis. The development system is a method of dissipating energy by installing a damper which is the like on a large displacement portion. Experimental results showed that in case of shorter strut make strength capacity increasement and in case of longer strut make deformation capacity increasement. The higher the strut height, the better the energy dissipation capacity. The proposed equation for estimating the steel damper strength applied to this study is a straight type strut damper. However, it is not suitable for calculation of the strength of clamped type strut damper where both flexural behavior and shear behavior are mixed.

키워드

참고문헌

  1. Marriott, D., Pampanin, S., Bull, D. K., & Palermo, A., "Dynamic Testing of Precast, Post-Tensioned Rocking Wall Systems with Alternative Dissipating Solutions", Bulletin of the New Zealand Society of Earthquake Engineering, Vol.41, No.2, pp.90-103, 2008 https://doi.org/10.5459/bnzsee.41.2.90-103
  2. Wada, A., Qu, Z., Motoyui, S., & Sakata, H., "Seismic retrofit of existing SRC frames using rocking walls and steel dampers", Frontiers of Architecture and Civil Engineering in China, Vol.5, No.3, pp.259-266, 2011 https://doi.org/10.1007/s11709-011-0114-x
  3. Lee, H. H., & Kim, S. I., "Evaluation on Hysteretic Behaviors of V shaped metallic dampers", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol.15, No.1, pp.254-262, 2011 https://doi.org/10.11112/jksmi.2011.15.1.254
  4. Lee, H. H., "Displacement and Velocity Dependence of Clamped Shape Metallic Dampers", Journal of the Korea Institute for Structural Maintenance and Inspection, Vol.17, No.2, pp.62-70, 2013 https://doi.org/10.11112/jksmi.2013.17.2.062
  5. Lee, H. H. (2017). Literature Review of Rocking Wall and Steel Damper System. Proceedings of the Korea Concrete Institute, Republic of Korea, Vol.29, No.2, pp.319-320
  6. Sritharan, S., Aaleti, S., Henry, R. S., Liu, K. Y., & Tsai, K. C. (2008). Introduction to PreWEC and key results of a proof of concept test. Proceedings of the 2008 Nigel Priestley Symposium, USA, pp.255-265, 2008