Fig. 1. Compressive strength for concrete partially substituted by LCD powder
Fig. 2. Compressive strength for concrete partially substituted by LCD powder
Fig. 3. Pore distribution of specimen obtained from concrete blended with LCD powder
Fig. 4. Deterioration of LCD-mixed concrete after exposure of different sulfate solutions for 12, 26 weeks
Fig. 5. Variation of Compressive strength for concrete containing LCD powder under sulfate-bearing environments
Table 1. Chemical and physical properties of binders
Table 2. Physical properties of fine and coarse aggregate
Table 3. Mix design for OPC concrete replaced by LCD powder
References
- Aligizaki, K.K. (2006). Pore structure of cement-based materials-Testing, interpretation and requirements. CRC Press, Florida, USA.
- Bae, S., Park, J., Lee, K. (2010). "Influence of mineral admixtures on the resistance to sulfuric acid and sulfate attack in concrete." Journal of the Korea Concrete Institute, Vol. 22, No. 2, pp. 219-228. https://doi.org/10.4334/JKCI.2010.22.2.219
- Bonen, D. (1992). "Composition and appearance of magnesium silicate hydrate and its relation to deterioratino of cement-based materials." Journal of the American Ceramic Society, Vol. 75, No. 10, pp. 2904-2906. https://doi.org/10.1111/j.1151-2916.1992.tb05530.x
- Haynes, H., O'Neill, R., Neff, M., Mehta, P.K. (2008). "Salt weathering distress on concrete exposed to sodium sulfate environment." ACI Materials Journal, Vol. 105, No. 1, pp. 35-43.
- Kim, M., Baek, D. (2007). "Unit weight and compressive strength of cement mortars using crushed sand under sulfate attacks." Journal of the Korean Society of Civil Engineers, Vol. 27, No. 4-A, pp. 585-591.
- Kim, S.K., Kang, S.T., Kim, J.K., Jang, I.Y. (2017). "Effects of particle size and cement replacement of LCD glass powder in concrete." Advances in Materials Science and Engineering, Vol. 2017, pp. 1-12.
- Kim, S., Hanif, A., Jang, I. (2018). "Incorporating Liquid Crystal Display (LCD) Glass Waste as Supplementary Cementing Material (SCM) in Cement Mortars-Rationale Based on Hydration, Durability, and Pore Characteristics." Materials, Vol. 11, No. 12, pp. 1-14.
- Kim, S., Jang, P., Jang, I. (2017). "Material bahaviour and strength character of 150 MPa ultra high strength concrete using LCD glass powder as fine aggregate." Journal of the Korea Concrete Institute, Vol. 29, No. 6, pp. 615-623. https://doi.org/10.4334/JKCI.2017.29.6.615
- Kim, S., Lee, K., Song, J., Jang, I. (2018). "Durability performance evaluations on resistance to chloride attack for concrete using LCD waste glass powder." Journal of the Korean Recycled Construction Resources Institute, Vol. 4, No. 4, pp. 289-296.
- Lee, S.k., Kang, L., Lee, C.G., Hong, M.H. (2013). "Disassembly and Compositional, Analysis of Waste LCD Displays." Journal of the Korean Resources Recycling, Vol. 22, No. 2, pp. 29-36.
- Lee, S. (2009). "Magnesium sulfate attack and deterioration mode of matakaolin blended cement matrix." Journal of the Korea Concrete Institute, Vol. 21, No. 1, pp. 21-27. https://doi.org/10.4334/JKCI.2009.21.1.021
- Liu, Z., Zhang, F., Deng, D., Xie, Y., Long, G., Tang, X. (2017). "Physical sulfate attack on concrete lining-A field case analysis." Case Studies in Construction Materials, Vol. 6, pp. 206-212. https://doi.org/10.1016/j.cscm.2017.04.002
- Mangat, P.S., Khatib, J.M. (1995). "Influence of Fly Ash, Silica Fume, and Slag on Sulfate Resistance of Concrete," ACI Materials Journal, Vol. 92, No. 5, pp. 542-552.
- Mehta, P.K. (1983). "Mechanism of Sulfate Attack on Portland Cement Concrete-Another Look." Cement and Concrete Research, Vol. 13, pp. 401-406. https://doi.org/10.1016/0008-8846(83)90040-6
- Moon, H., Lee, S., Kim, H., Kim, S. (2002). "Evaluation on the resistance of Portland cement mortars due to chemical attack." Journal of the Korean Society of Civil Engineers, Vol. 22, No. 1-A, pp. 181-191.
- Moon, H.Y., Jeon, J.K., Kim, H.S. (2005). "Resistance on the sulfuric acid corrosion of cement matrix containing mineral admixture." Journal of the Korean Society of Civil Engineers, Vol. 25, No. 1-A, pp. 225-232.
- Narayanan, N. (2008). "Quantifying the effects of hydration enhancement and dilution in cement pastes containing coarse glass powder." Journal of Advanced Concrete Technology, Vol. 6, No. 3, pp. 397-408. https://doi.org/10.3151/jact.6.397
- Park, K., Cho, Y., Shin, D. (2017). "Effects of magnesium and sulfate ions on the sulfate attack resistance of alkali-activated materials." Journal of the Korea Concrete Institute, Vol. 29, No. 4, pp. 415-424. https://doi.org/10.4334/JKCI.2017.29.4.415
- Santhanam, M., Cohen, M.D., Olek, J. (2003). "Mechanism of Sulfate Attack : A Fresh Look Part 2 : Proposed Mechanisms."Cement and Concrete Research, Vol. 33, No. 3, pp. 341-346. https://doi.org/10.1016/S0008-8846(02)00958-4
- Seo, Y. (2015). "Characterization of high concentration PM2.5 by nitrate and ammonium ions of PM2.5 in Seoul." Journal of Korea Society of Environmental Administration, Vol. 21, No. 1, pp. 1-7.
- Shin, D., Kang, L., Park, J.L., Lee, C.G., Yoon, J., Hong, H.S. (2015). "Current research trend on recycling of waste flat panel display panel glass." Journal of Korean Institute of Resources Recycling, Vol. 24, No. 1, pp. 58-65. https://doi.org/10.7844/kirr.2015.24.1.58
- Wee, T.H., Suryavanshi, A.K., Wong, S.F., AnisurRahman, A.K.M. (2000). "Sulfate Resistance of Concrete Containing Mineral Admixtures." ACI Materials Journal, Vol. 97, No. 5, pp. 536-549.
- Yang, H.J., Jin, S.H., Ann, K.Y. (2016). "Chloride transport of high alumina cement mortar exposed to a saline solution." Advances in Materials Science and Engineering, Vol. 2016, pp. 1-8.
- Yoshida, N., Matsunami, Y., Nagayama, M., Sakai, E. (2010). "Salt weathering in residential concrete foundation exposed to sulfate-bearing ground." Journal of Advanced Concrete Technology, Vol. 8, No. 2, pp. 121-134. https://doi.org/10.3151/jact.8.121
- Zheng, K. (2013). Eco-efficient concrete-11. Recycled glass concrete. Woodhead publishing, Cambridge, UK.
- Zhou, Y., Tian, H., Sui, L., Xing, F., Han, N. (2015). "Strength deterioration of concrete in sulfate environment: An experimental study and theoretical modeling." Advances in Materials Science and Engineering, Vol. 2015, pp. 1-13.