Fig. 1. Corrosion inhibition efficiencies of different concentrations of the extracts of leaf and stem of Lepidagathis keralensis as determined by weight loss method.
Fig. 2. Nyquist plots obtained for mild steel in 1M HCl at 303K in the presence and absence of a) Lepidagathis keralensis Leaf extract b) Lepidagathis keralensis Stem extract.
Fig. 3. Tafel polarization curves for mild steel in 1M HCl at 303K in the presence and absence of a) Lepidagathis keralensis Leaf extract b) Lepidagathis keralensis Stem extract.
Fig. 4. Langmuir adsorption isotherm at different temperatures for mild steel in 1M HCl with different concentrations of a) Lepidagathis keralensis Leaf extract b) Lepidagathis keralensis Stem extract.
Fig. 5. Plot of ln Kads against 1/T for a) Lepidagathis keralensis Leaf extract b) Lepidagathis keralensis Stem extract.
Fig. 6. UV-Vis absorption spectra of solutions of A) extracts in 1M HCl before mild steel immersion, B) extracts in 1M HCl after mild steel corrosion and C) 1M HCl without extracts after mild steel corrosion for Lepidagathis keralensis leaf extracts.
Fig. 7. UV-Vis absorption spectra of solutions of A) extracts in 1M HCl before mild steel immersion, B) extracts in 1M HCl after mild steel corrosion and C) 1M HCl without extracts after mild steel corrosion for Lepidagathis keralensis stem extracts.
Fig. 8b. FT-IR spectra of A) stem extract and B) the film formed on the mild steel surface after immersion in 1M HCl solution containing stem extract.
Fig. 8a. FT-IR spectra of A) leaf extract and B) the film formed on the mild steel surface after immersion in 1M HCl solution containing leaf extract.
Fig. 9. SEM images of a) mild steel before corrosion b) mild steel in 1M HCl in the absence of inhibitor b) mild steel in 1M HCl in the presence of 200ppm of Lepidagathis keralensis leaf extract c) mild steel in 1M HCl in the presence of 200ppm of Lepidagathis keralensis stem extract.
Fig. 10. a) optimized geometry b) HOMO and c) LUMO of Phenoxyethene.
Table 1. Corrosion parameters for mild steel in 1 M HCl obtained from weight loss measurements at different temperatures in the absence and presence of inhibitor.
Table 2. Impedance parameters obtained for Nyquist plots for mild steel corrosion in 1M HCl at various concentrations of leaf and stem extracts as inhibitor.
Table 3. Polarization data for mild steel corrosion in 1M HCl at various concentrations of leaf and stem extracts as inhibitor.
Table 4. Thermodynamic parameters calculated for the adsorption of leaf and stem extracts as inhibitor on mild steel surface in 1M HCl at different temperatures.
Table 6. Quantum chemical parameters calculated for Phenoxyethene
참고문헌
- D. Ben Hmamou, R. Salghi, A. Zarrouk, H. Zarrok, R. Touzani, B. Hammouti and A. El Assyry, J. Environ. Chem. Eng., 2015, 3(3), 2031-2041. https://doi.org/10.1016/j.jece.2015.03.018
- K.K. Anupama, K. Ramya, K.M. Shainy and A. Joseph, Mater. Chem. Phys., 2015, 167, 28-41. https://doi.org/10.1016/j.matchemphys.2015.09.013
- S. Leelavathi, R. Rajalakshmi, J. Mater. Environ. Sci., 2013, 4(5), 625-638.
- H.S. Zaferani, M. Sharifi, D. Zaarei and M.R. Shishesaz, J. Environ. Chem. Eng., 2013, 1(4), 652-657. https://doi.org/10.1016/j.jece.2013.09.019
- L. R.Chauhan, G. Gunasekaran, Corros. Sci., 2007, 49(3), 1143-1161. https://doi.org/10.1016/j.corsci.2006.08.012
- C. Rahal, M. Masmoudi, R. Abdelhedi, R. Sabot, M. Jeannin, M. Bouaziz and P. Refait, J. Electroanal. Chem., 2016, 769, 53-61. https://doi.org/10.1016/j.jelechem.2016.03.010
- D. Prabhu and P. Rao, J. Environ. Chem. Eng., 2013, 1(4), 676-683. https://doi.org/10.1016/j.jece.2013.07.004
- H. Cang, Z. Fei, J. Shao, W. Shi and Q. Xu, Int. J. Electrochem. Sci., 2013, 8(1), 720-734.
- L. Nnanna, G. Nnanna, J. Nnakaife, N. Ekekwe and P. Eti, Int. J. Mater. Chem., 2016, 6(1), 12-18.
- J. K. Odusote and O. M. Ajayi, J. Electrochem. Sci. Technol., 2013, 4(2), 81-87. https://doi.org/10.5229/JECST.2013.4.2.81
- P.V. Madhusoodanan and N.Singh, Kew Bull., 1992, 47(2), 301-303. https://doi.org/10.2307/4110674
- M. C. Divakar, S. Sandhya, K. R. Vinod, A. P. Razik, K. K. Ranjimol and S. Mohan, Int. J. Drug Formul. Res., 2010, 1(1), 12-53.
- S. K. Prasad, Doctoral thesis, 2012, Kannur University, Kerala, 660-661.
- P. Leena, N.H.Z. Hukuman, M. Jisha, World J. Pharm. Res., 2016, 5(12), 937-948.
- A. El Bribri, M. Tabyaoui, B. Tabyaoui, H. El Attari and F. Bentiss, Mater. Chem. Phys., 2013, 141(1), 240-247. https://doi.org/10.1016/j.matchemphys.2013.05.006
- L. Palakkal, N.H.Z. Hukuman and J. Mullappally, J. Appl. Pharm. Sci., 2017, 7(06), 182-189.
- L.H. Madkour, Int. J. Ind. Chem., 2015, 6(3), 165-184. https://doi.org/10.1007/s40090-015-0039-7
- S.K. Saha and P. Banerjee, RSC Adv., 2015, 5(87), 71120-71130. https://doi.org/10.1039/C5RA15173B
- B.M. Prasanna, B.M. Praveen, N. Hebbar, T. V Venkatesha and H.C. Tandon, Int. J. Ind. Chem., 2016, 7(1), 9-19. https://doi.org/10.1007/s40090-015-0064-6
- S.K. Shukla and E.E. Ebenso, Int. J. Electrochem. Sci., 2011, 6(8), 3277-3291.
- D.K. Yadav and M.A. Quraishi, Ind. Eng. Chem. Res., 2012, 51(46), 14966-14979. https://doi.org/10.1021/ie301840y
- M. Mobin, S. Zehra and R. Aslam, RSC Adv., 2016, 6(7), 5890-5902. https://doi.org/10.1039/C5RA24630J
- K.F. Khaled, Electrochim. Acta., 2010, 55(22), 6523-6532. https://doi.org/10.1016/j.electacta.2010.06.027
- P. Kalaiselvi, S. Chellammal, S. Palanichamy and G. Subramanian, Mater. Chem. Phys., 2010, 120(2-3), 643-648. https://doi.org/10.1016/j.matchemphys.2009.12.015
- I.B. de Barros, M.A.A. Kappel, P.M. dos Santos, V.F. da Veiga Junior, E. D'Elia and I.N. Bastos, Mater. Res, 2016, 19(1), 187-194. https://doi.org/10.1590/1980-5373-MR-2015-0494
- K.K. Anupama, K. Ramya, K.M. Shainy and A. Joseph, Mater. Chem. Phys., 2015, 167, 28-41. https://doi.org/10.1016/j.matchemphys.2015.09.013
- A.A. Al-Amiery, A.A.H. Kadhum, A.H.M. Alobaidy, A.B. Mohamad and P.S. Hoon, Materials, 2014, 7(2), 662-672. https://doi.org/10.3390/ma7020662
- K.P. Vinod Kumar, M. Sankara Narayanan Pillai and G. Rexin Thusnavis, J. Mater. Environ. Sci., 2010, 1(2), 119-128.
- S. Paul and I. Koley, J. Bio- Tribo-Corrosion., 2016, 2(2), 6. https://doi.org/10.1007/s40735-016-0035-2
- R. Mohan, K. Ramya, K.K. Anupama and A. Joseph, J. Mol. Liq., 2016, 220, 707-717. https://doi.org/10.1016/j.molliq.2016.04.113
- G. Khan, K.M.S. Newaz, W.J. Basirun, H.B.M. Ali, F.L. Faraj and G.M. Khan, Int. J. Electrochem. Sci., 2015, 10(8), 6120-6134.
- Zarrouk, B. Hammouti, H. Zarrok, S.S. Al-Deyab and M. Messali, Int. J. Electrochem. Sci., 2011, 6, 6261-6274
- W.Durnie, R. De Marco, A.Jefferson and B. Kinsella, J. Electrochem. Soc., 1999, 146(5), 1751-1756. https://doi.org/10.1149/1.1391837
- N.A. Odewunmi, S.A. Umoren and Z.M. Gasem, J. Environ. Chem. Eng., 2015, 3(1), 286-296. https://doi.org/10.1016/j.jece.2014.10.014
- S.A. Umoren and M.M. Solomon, J. Environ. Chem. Eng., 2017, 5(1), 246-273. https://doi.org/10.1016/j.jece.2016.12.001
- Y. Abboud, A. Abourriche, T. Ainane, M. Charrouf, A. Bennamara, O. Tanane and B. Hammouti, Chem. Eng. Commun., 2009, 197(7), 788-800.
- S. A.Umoren, Eduok, M. M.Solomon, A. P. Udoh, Arab. J. Chem., 2016, 9, S209-S224. https://doi.org/10.1016/j.arabjc.2011.03.008
- P. O. Ameh, A. M. Kolo, A.Ahmed, I. K. Ajanaku, J. Ind. Environ. Chem., 2017, 1(1), 15-21.
- M. A.Deyab, M. M. Osman,, A. E. ElkholyEl-Taib, F. Heakal, RSC Adv. 2017, 7, 45241-45251. https://doi.org/10.1039/C7RA07979F
- G. Gece, Corros. Sci., 2008, 50(11), 2981-2992. https://doi.org/10.1016/j.corsci.2008.08.043
- Y.E. Louadi, F. Abrigach, A. Bouyanzer, R. Touzani, A. El Assyry, A. Zarrouk and B. Hammouti, Port. Electrochim. Acta, 2017, 35(3), 159-178. https://doi.org/10.4152/pea.201703159
- K.F. Khaled, Electrochim. Acta. 2010, 55(22), 6523-6532. https://doi.org/10.1016/j.electacta.2010.06.027
- J. Bhawsar, P.K. Jain and P. Jain, Alexandria Eng. J., 2015, 54(3), 769-775. https://doi.org/10.1016/j.aej.2015.03.022
- A. Ousslim, A. Chetouani, B. Hammouti, K. Bekkouch, S. S. Al-Deyab, A. Aouniti and A. Elidrissi, Int. J. Electrochem. Sci., 2013, 8, 5980-6004.
- N. Soraya, D. Rayenne, M.Boulanouar, O. Rabah, Port. Electrochim. Acta, 2018, 36 (1), 23-34. https://doi.org/10.4152/pea.201801023
- Z. Rouifi, M. El Faydy, H. About, F. Benhiba, H. Ramsis, M. Boudalia, H. Zarrok, R. Touir, M.El.M Rabet, H. Oudda, A. Guenbour and B. Lakhrissi, J. Mater. Environ. Sci., 2018, 9(2), 453-465.
- R.G. Parr and R.G. Pearson, J. Am. Chem. Soc., 1983, 105(26), 7512-7516. https://doi.org/10.1021/ja00364a005
- K.K. Anupama, K. Ramya, A. Joseph, J. Mol. Liq., 2016, 216, 146-155. https://doi.org/10.1016/j.molliq.2016.01.019
- B. Adindu, C. Ogukwe, F. Eze and E. Oguzie, J. Electrochem. Sci. Technol., 2016, 7(4), 251-262. https://doi.org/10.5229/JECST.2016.7.4.251