DOI QR코드

DOI QR Code

An overview of several techniques employed to overcome squeezing in mechanized tunnels; A case study

  • Eftekhari, Abbas (Department of Mining Engineering, Faculty of Engineering, University of Kashan) ;
  • Aalianvari, Ali (Department of Mining Engineering, Faculty of Engineering, University of Kashan)
  • 투고 : 2018.12.22
  • 심사 : 2019.05.28
  • 발행 : 2019.06.10

초록

Excavation of long tunnels by shielded TBMs is a safe, fast, and efficient method of tunneling that mitigates many risks related to ground conditions. However, long-distance tunneling in great depth through adverse geological conditions brings about limitations in the application of TBMs. Among various harsh geological conditions, squeezing ground as a consequence of tunnel wall and face convergence could lead to cluttered blocking, shield jamming and in some cases failure in the support system. These issues or a combination of them could seriously hinder the performance of TBMs. The technique of excavation has a strong influence on the tunnel response when it is excavated under squeezing conditions. The Golab water conveyance tunnel was excavated by a double-shield TBM. This tunnel passes mainly through metamorphic weak rocks with up to 650 m overburden. These metamorphic rocks (Shales, Slates, Phyllites and Schists) together with some fault zones are incapable of sustaining high tangential stresses. Prediction of the convergence, estimation of the creeping effects and presenting strategies to overcome the squeezing ground are regarded as challenging tasks for the tunneling engineer. In this paper, the squeezing potential of the rock mass is investigated in specific regions by dint of numerical and analytical methods. Subsequently, several operational solutions which were conducted to counteract the challenges are explained in detail.

키워드

참고문헌

  1. Aalianvari, A. (2017), "Combination of engineering geological data and numerical modeling results to classify the tunnel route based on the groundwater seepage", Geomech. Eng., 13(4), 671-683. https://doi.org/10.12989/gae.2017.13.4.671.
  2. Aalianvari, A., Tehrani, M.M. and Soltanimohammadi, S. (2013), "Application of geostatistical methods to estimation of water flow from upper reservoir of Azad pumped storage power plant", Arab. J. Geosci., 6(7), 2571-2579. https://doi.org/10.1007/s12517-012-0528-3.
  3. Grima, M.A., Bruines, P.A. and Verhoef, P.N.W. (2000), "Modeling tunnel boring nachine performance by neuro-fuzzy methods", Tunn. Undergr. Sp. Technol., 15(3), 259-269. https://doi.org/10.1016/S0886-7798(00)00055-9.
  4. Amberg, F. (2009), "Numerical simulations of tunnelling in soft rock under water pressure", Proceedings of the ECCOMAS Thematic Conference on Computational Methods in Tunnelling, Bochum, Germany, September.
  5. Bilgin, N. and Algan, M. (2012), "The performance of a TBM in a squeezing ground at Uluabat, Turkey", Tunn. Undergr. Sp. Technol., 32, 58-65. https://doi.org/10.1016/j.tust.2012.05.004.
  6. Eftekhari, A., Aalianvari, A. and Rostami, J. (2018), "Influence of TBM operational parameters on optimized penetration rate in schistose rocks; a case study: Golab tunnel Lot-1, Iran", Comput. Concrete, 22(2), 239-248. https://doi.org/10.12989/cac.2018.22.2.239.
  7. Eftekhari, A., Aalianvari, A. and Najibi, A.R. (2016), "Strategies of paasing TBM under adverse geological conditions, in tunnel Golab", Proceedings of the 13th International Conference on Underground Construction, Prague, Czech Republic, May.
  8. Eftekhari, A. and Bakhshandeh Amineh, H. (2016), "Compartions of actual and theoretical rates of disk cutters wear, of Golab tunnel", Proceedings of the 13th International Conference on Underground Construction, Prague, Czech Republic, May.
  9. Eftekhari, A., Taremi, M. and Saeidi, M. (2014), "Uncertainties and complexities of the geological model in slope stability: A case study of Sabzkuh Tunnel", Int. J. Min. Geo-Eng., 48(1), 69-79.
  10. Farrokh, E., and Rostami J. (2008), "Correlation of tunnel convergence with TBM operational parameters and chip size in the Ghomroud tunnel, Iran", Tunn. Undergr. Sp. Technol., 23(6), 700-710. https://doi.org/10.1016/j.tust.2008.01.005.
  11. Hasanpour, J., Chakeri, H., Ozcelik, Y. and Denek, H. (2012), "Evaluation of surface settlements in the Istanbul metro in terms of analytical, numerical and direct measurements", Bull. Eng. Geol. Environ., 71(3), 499-510. https://doi.org/10.1007/s10064-012-0428-5.
  12. Hasanpour, J., Rostami, J. and Barla, G. (2015), "Impact of advance rate on entrapment risk of a double-shielded TBM in squeezing grounds", Rock Mech. Rock Eng., 48(3),1115-1130. https://doi.org/10.1007/s00603-014-0645-2.
  13. Hasanpour, J., Rostami, J. and Ozcelik, Y. (2016), "Impact of overcut on interaction between shield and ground in the tunneling with a double-shield TBM", Rock Mech. Rock Eng., 49(5), 2015-2022. https://doi.org/10.1007/s00603-015-0823-x.
  14. Hasanpour, J. and Rostami, J. (2014), "Under B. 3D finite difference model for simulation of double shield TBM tunneling in squeezing grounds", Tunn. Undergr. Sp. Technol., 40, 109-126. https://doi.org/10.1016/j.tust.2013.09.012.
  15. Hasanpour, J. (2014), "Advance numerical simulation of tunneling by using a double shield TBM", Comput. Geotech., 57, 37-52. https://doi.org/10.1016/j.compgeo.2014.01.002.
  16. Hasanpour, J., Schmittb, J., Ozcelikc, Y., Rostami, J. (2017), "Examining the effect of adverse geological conditions on jamming of a single shielded TBM in Uluabat tunnel using numerical modeling", J. Rock Mech. Geotech. Eng., 9(6), 1112-1122. https://doi.org/10.1016/j.jrmge.2017.05.010.
  17. Hasanpour, J., Rostami, J., Thewes, M. and Schmittb, J. (2018), "Parametric study of the impacts of various geological and machine parameters on thrust force requirements for operating a single shield TBM in squeezing ground", Tunn. Undergr. Sp. Technol., 73, 252-260. https://doi.org/10.1016/j.tust.2017.12.027.
  18. Huang, X.L., Zhou, Z.G. and Yang, X.L. (2018), "Roof failure of shallow tunnel based on simplified stochastic medium theory", Geomech. Eng., 14(6), 571-580. https://doi.org/10.12989/gae.2018.14.6.571.
  19. Li, T.Z. and Yang, X.L. (2018), "Probabilistic stability analysis of subway tunnels combining multiple failure mechanisms and response surface method", Int. J. Geomech., 18(12), 04018167. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001315.
  20. Lombardi, G. and Panciera, A. (1997), "Problems with TBM and linings in squeezing ground", Tunn. Tunn. Int., 29(6), 54-56.
  21. Luo, W.J. and Yang, X.L. (2018), "3D stability of shallow cavity roof with arbitrary profile under influence of pore water pressure", Geomech. Eng., 16(6), 569-575. https://doi.org/10.12989/gae.2017.13.4.671.
  22. Ramoni, M. and Anagnostou, G. (2007), "Numerical analysis of the development of squeezing pressure during TBM standstills", Proceedings of the 11th Congress of the International Society for Rock Mechanics (ISRM), Lisbon, Portugal, July.
  23. Ramoni, M. and Anagnostou, G. (2010), "Thrust force requirements for TBMs in squeezing ground", Tunn. Undergr. Sp. Technol., 25(4), 433-455. https://doi.org/10.1016/j.tust.2010.02.008.
  24. Sarafrazi, V., Haeri, H., Shemirani, A., Hedayat, A. and Hosseini, S.S. (2017), "Investigation of ratio of TBM disc spacing to penetration depth in rocks with different tensile strengths using PFC2D", Comput. Concrete, 20(4), 429-437. https://doi.org/10.12989/cac.2017.20.4.429.
  25. Taromi, M., Eftekhari, A., Hamidi, J.K. and Aalianvari, A. (2017), "A discrepancy between observed and predicted NATM tunnel behaviors and updating: A case study of the Sabzkuh tunnel", Bull. Eng. Geol. Environ., 76(2), 713-729. https://doi.org/10.1007/s10064-016-0862-x.
  26. Taremi M. and Eftekhari A. (2018), "Tunnel design and construction process in difficult ground condition with Analysis of Controlled Deformation (ADECO) approach; a case study", Int. J. Min. Geo-Eng., 52(2), 149-160.
  27. Ding, W.Q., Peng, Y.C., Yan, Z.G., Shen, B.W., Zhu, H.H. and Wei, X.X. (2013), "Full-scale testing and modeling of the mechanical behavior of shield TBM tunnel joint", Struct. Eng. Mech., 45(3), 337-354. https://doi.org/10.12989/sem.2013.45.3.337.
  28. Wittke, W., Wittke-Gattermann, P. and Wittke-Schmitt, B. (2007), "TBM-heading in rock, design of the shield mantle", Proceedings of the ECCOMAS Thematic Conference on Computational Methods in Tunnelling, Vienna, Austria, August.
  29. Yang, X.L. and Yan, R.M. (2015), "Collapse mechanism for deep tunnel subjected to seepage force in layered soils", Geomech. Eng., 8(5), 741-756. https://doi.org/10.12989/gae.2015.8.5.741.
  30. Yang, X.L. and Wang, H.Y., (2018), "Catastrophe analysis of active-passive mechanisms for shallow tunnels with settlement", Geomech. Eng., 15(1), 621-630. https://doi.org/10.12989/gae.2018.15.1.621.
  31. Zhou, Z.Q., Li, S.C., Li, L.P., Shi, S.S., Xu, Z.H. (2015), "An optimal classification method for risk assessment of water inrush in karst tunnels based on the grey system", Geomech. Eng., 8(5), 631-647. https://doi.org/10.12989/gae.2015.8.5.631.

피인용 문헌

  1. Estimation of the excavation damage zone in TBM tunnel using large deformation FE analysis vol.24, pp.4, 2019, https://doi.org/10.12989/gae.2021.24.4.323