Acknowledgement
Supported by : National Natural Science Foundation of China
References
- Alehossein, H. and Poulsen, B.A. (2010), "Stress analysis of longwall top coal caving", Int. J. Rock Mech. Min. Sci., 47(1), 30-41. https://doi.org/10.1016/j.ijrmms.2009.07.004.
- Azam, S. and Mishra, D.P. (2019), "Effects of particle size, dust concentration and dust-dispersion-air pressure on rock dust inertant requirement for coal dust explosion suppression in underground coal mines", Proc. Safety Environ. Protect. https://doi.org/10.1016/j.psep.2019.03.030.
- Gasparotto, J., Chaves, P.R., Da Boit Martinello, K., da Rosa-Siva, H.T., Bortolin, R.C., Silva, L.F.O., Rabelo, T.K., da Silva, J., da Silva, F.R., Nordin, A.P., Soares, K., Borges, M.S., Gelain, D.P. and Moreira, J.C.F. (2018), "Obese rats are more vulnerable to inflammation, genotoxicity and oxidative stress induced by coal dust inhalation than non-obese rats", Ecotoxicol. Environ. Safety, 165, 44-51. https://doi.org/10.1016/j.ecoenv.2018.08.097.
- Greene, N.T., Alhussaini, M.A., Easter, J.R., Argo IV, T.F., Walilko, T. and Tollin, D.J. (2018), "Intracochlear pressure measurements during acoustic shock wave exposure", Hear. Res., 365, 149-164. https://doi.org/10.1016/j.heares.2018.05.014
- Hao, H. (2002), "Numerical analysis of blast-induced stress waves in a rock mass with anisotropic continuum damage models part 1: Equivalent material property approach", Rock Mech. Rock Eng., 35(2), 79-94. https://doi.org/10.1007/s006030200012
- Headquarters, U.S. Army Corps of Engineers (1995), "Underwater Blast Monitoring", Engineer Technical Letter No. 1110-8-11,
- U.S. Army Corps of Engineers, Washington, D.C., U.S.A. Houim, R.W. and Oran, E.S. (2015), "Numerical simulation of dilute and dense layered coal-dust explosions", Proc. Combust. Inst., 35(2), 2083-2090. https://doi.org/10.1016/j.proci.2014.06.032.
- Konicek, P., Soucek, K., Stas, L. and Singh, R. (2013), "Long-hole destress blasting for rockburst control during deep underground coal mining", Int. J. Rock Mech. Min. Sci., 61, 141-153. https://doi.org/10.1016/j.ijrmms.2013.02.001.
- Le, T.D., Mitra, R., Oh, J. and Hebblewhite, B. (2017), "A review of cavability evaluation in longwall top coal caving", Int. J. Min. Sci. Technol., 27(6), 907-915. https://doi.org/10.1016/j.ijmst.2017.06.021.
- Lee, E.L., Hornig, H.C. and Kury, J.W. (1968), "Adiabatic expansion of high explosive detonation products", Report UCRL-50422, University of California, Lawrence Radiation Laboratory, Livermore, California, U.S.A.
- Li, N., Huang, B., Zhang, X., Yuyang, T. and Li, B. (2019), "Characteristics of microseismic waveforms induced by hydraulic fracturing in coal seam for coal rock dynamic disasters prevention", Safe. Sci., 115, 188-198. https://doi.org/10.1016/j.ssci.2019.01.024.
- Livermore Software Technology Corporation (LSTC), (2003), LSDYNA Keyword User's Manual, Version 970. Livermore, California, U.S.A.
- Mondal, D. and Roy, P.N.S. (2019), "Fractal and seismic b-value study during dynamic roof displacements (roof fall and surface blasting) for enhancing safety in the longwall coal mines", Eng. Geol., 253,184-204. https://doi.org/10.1016/j.enggeo.2019.03.018.
- Ozacar, V. (2018), "New methodology to prevent blasting damages for shallow tunnel", Geomech. Eng., 15(6), 1-12. https://doi.org/10.12989/gae.2018.15.6.001.
- Saiang, D. (2009), "Stability analysis of the blast-induced damage zone by continuum and coupled continuum-discontinuum methods", Eng. Geol., 116, 1-11. https://doi.org/10.1016/j.enggeo.2009.07.011.
- Sampath, K.H.S.M., Perera, M.S.A., Elsworth, D., Ranjith, P.G., Matthai, S.K., Rathnaweera, T. and Zhang, G. (2019), "Effect of coal maturity on CO2-based hydraulic fracturing process in coal seam gas reservoirs", Fuel, 236, 179-189. https://doi.org/10.1016/j.fuel.2018.08.150.
- Sanchidrian, J.A., Castedo, R., Lopez, L.M. and Segarra, P. and Santos, A.P. (2015), "Determination of the JWL constants for ANFO and emulsion explosives from cylinder test data", Cent. Eur. J. Energ. Mater., 12(2), 177-194.
- Sharma, S.K. and Rai, P. (2017), "Establishment of blasting design parameters influencing mean fragment size using state-of-art statistical tools and techniques", Measurement, 96, 34-51. https://doi.org/10.1016/j.measurement.2016.10.047.
- Silva, J., Li, L. and Gernand, J.M. (2018), "Reliability analysis for mine blast performance based on delay type and firing time", Int. J. Min. Sci. Technol., 28(2), 195-204. https://doi.org/10.1016/j.ijmst.2017.07.004.
- Thiagarajan, G., Kadambi, A.V., Robert, S. and Johnson, C.F. (2015), "Experimental and finite element analysis of doubly reinforced concrete slabs subjected to blast loads", Int. J. Impact Eng., 75, 162-173. https://doi.org/10.1016/j.ijimpeng.2014.07.018.
- Timo, S. (2010), "Damage-viscoplastic consistency model with a parabolic cap for rocks with brittle and ductile behavior under low-velocity impact loading", Int. J. Numer. Anal. Meth. Geomech., 34, 1362-1386. https://doi.org/10.1002/nag.868.
- Vakili, A. and Hebblewhite, B.K. (2010), "A new cavability assessment criterion for Longwall Top Coal Caving", Int. J. Rock Mech. Min. Sci., 47(8), 1317-1329. https://doi.org/10.1016/j.ijrmms.2010.08.010.
- Wang, J.C., Liu, F. and Zhang, J.W. (2019), "Investigation on the propagation mechanism of explosion stress wave in underground mining", Geomech. Eng., 17(3), 295-305. https://doi.org/10.12989/gae.2019.17.3.295.
- Wang, X.L. and Suo, Y.L. (1995), "Computer simulation of preexplosion of fully mechanized coal caving roof in hard coal seam", J. Xi'an. Min. Inst., 15, 97-101.
- Wang, Z.L. (2007), "Numerical simulation of tensile damage and blast crater in brittle rock due to underground explosion", Int. J. Rock Mech. Min. Sci., 44(5), 730-738. https://doi.org/10.1016/j.ijrmms.2006.11.004.
- Wojtecki, L., Konicek, P. and Schreiber, J. (2017), "Effects of torpedo blasting on rockburst prevention during deep coal seam mining in the Upper Silesian Coal Basin", J. Rock Mech. Geotech. Eng., 9(4), 694-701. https://doi.org/10.1016/j.jrmge.2017.03.014.
- Wojtecki, L., Konicek, P., Mendecki, M.J. and Zuberek, W.M. (2017), "Application of seismic parameters for estimation of destress blasting effectiveness", Proc. Eng., 191, 750-760. https://doi.org/10.1016/j.proeng.2017.05.241.
- Xie, L.X., Lu, W.B. and Zhang, Q.B. (2016), "Damage evolution mechanisms of rock in deep tunnels induced by cut blasting", Tunn. Undergr. Sp. Technol., 58, 257-270. https://doi.org/10.1016/j.tust.2016.06.004.
- Xu, B. (2004), "Application of the longwall top coal caving system in Australian thick seam coal mines", The University of New South Wales, Sydney, Australia.
Cited by
- Numerical calculation and test of the composite materials under dynamic loading vol.38, pp.1, 2019, https://doi.org/10.12989/scs.2021.38.1.079
- Investigation of blasting impact on limestone of varying quality using FEA vol.25, pp.2, 2019, https://doi.org/10.12989/gae.2021.25.2.111