Structural Engineering and Mechanics

  • 제70권5호
  • /
  • Pages.639-647
  • /
  • 2019
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Moment-rotation prediction of precast beam-to-column connections using extreme learning machine

  • Trung, Nguyen Thoi (Division of Computational Mathematics and Engineering, Institute for Computational Science, Ton Duc Thang University) ;
  • Shahgoli, Aiyoub Fazli (Department of Civil Engineering, Islamic Azad University) ;
  • Zandi, Yousef (Department of Civil Engineering, Islamic Azad University) ;
  • Shariati, Mahdi (Division of Computational Mathematics and Engineering, Institute for Computational Science, Ton Duc Thang University) ;
  • Wakil, Karzan (Research Center, Sulaimani Polytechnic University) ;
  • Safa, Maryam (Institute of Research and Development, Duy Tan University) ;
  • Khorami, Majid (Universidad UTE, Facultad de Arquitectura y Urbanismo)
  • 투고 : 2019.03.29
  • 심사 : 2019.05.31
  • 발행 : 2019.06.10
⟨ 이전 논문 다음 논문 ⟩

초록

The performance of precast concrete structures is greatly influenced by the behaviour of beam-to-column connections. A single connection may be required to transfer several loads simultaneously so each one of those loads must be considered in the design. A good connection combines practicality and economy, which requires an understanding of several factors; including strength, serviceability, erection and economics. This research work focuses on the performance aspect of a specific type of beam-to-column connection using partly hidden corbel in precast concrete structures. In this study, the results of experimental assessment of the proposed beam-to-column connection in precast concrete frames was used. The purpose of this research is to develop and apply the Extreme Learning Machine (ELM) for moment-rotation prediction of precast beam-to-column connections. The ELM results are compared with genetic programming (GP) and artificial neural network (ANN). The reliability of the computational models was accessed based on simulation results and using several statistical indicators.

키워드

참고문헌

  1. Abedini, M., Khlaghi, E.A., Mehrmashhadi, J., Mussa, M.H., Ansari, M. and Momeni, T. (2017), "Evaluation of concrete structures reinforced with fiber reinforced polymers bars: A review", J. Asian Sci. Res.,7(5), 165-175.
  2. Abedini, M., Mutalib, A.A., Mehrmashhadi, J., Raman, S.N., Alipour, R., Momeni, T. and Mussa, M.H. (2019), "Large deflection behavior effect in reinforced concrete columns exposed to extreme dynamic loads", Frontier. Struct. Civil Eng., 32.
  3. Aghakhani, M., Suhatril, M., Mohammadhassani, M., Daie, M. and Toghroli, A. (2015), "A simple modification of homotopy perturbation method for the solution of Blasius equation in semi-infinite domains", Math. Problem. Eng., 2015, 7. http://dx.doi.org/10.1155/2015/671527.
  4. Alcocer, S.M., Carranza, R., Perez-Navarrete, D. and Martinez, R. (2002), "Seismic tests of beam-to-column connections in a precast concrete frame", PCI J., 47(3), 70-89. https://doi.org/10.15554/pcij.05012002.70.89
  5. Khanouki, A., Mehdi, M., Ramli Sulong, N.H. and Shariati, M. (2011), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Adv. Mater. Res., 168, 2329-2333. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2329.
  6. Ashour, A.F. and Kara, I.F. (2014), "Size effect on shear strength of FRP reinforced concrete beams", Compos. Part B, 60, 612-620. https://doi.org/10.1016/j.compositesb.2013.12.002.
  7. Bashir, R. and Ashour, A. (2012), "Neural network modelling for shear strength of concrete members reinforced with FRP bars", Compos. Part B, 43(8), 3198-3207. https://doi.org/10.1016/j.compositesb.2012.04.011.
  8. Birkeland, P.W. and Birkeland, H.W. (1966), "Connections in precast concrete construction", Journal Proceedings, 63(3), 345-368.
  9. Bobaru, F., Mehrmashadi, J., Chen, Z. and Niazi, S. (2018), "Intraply fracture in fiber-reinforced composites: A peridynamic analysis", ASC 33rd Annual Technical Conference & 18th USJapan Conference on Composite Materials, Seattle, September.
  10. Chen, C., Shi, L., Shariati, M., Toghroli, A., Mohamad, E.T., Bui, D.T. and Khorami, M. (2019), "Behavior of steel storage pallet racking connection-A review", Steel Compos. Struct., 30(5), 457-469. https://doi.org/10.12989/scs.2019.30.5.457
  11. Cheok, G.S. and Lew, H. (1991), "Performance of precast concrete beam-to-column connections subject to cyclic loading", PCI J., 36(3), 56-67. https://doi.org/10.15554/pcij.05011991.56.67
  12. Cheok, G.S. and Lew, H. (1993), "Model precast concrete beamto-column connections subject to cyclic loading", PCI J., 38(4), 80-92. https://doi.org/10.15554/pcij.07011993.80.92
  13. Choi, H.K., Choi, Y.C. and Choi, C.S. (2013), "Development and testing of precast concrete beam-to-column connections", Eng. Struct., 56, 1820-1835. https://doi.org/10.1016/j.engstruct.2013.07.021.
  14. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141.
  15. El Debs, A.L.H., Neto, A.C., Chaves, I.A., Squarcio, R.M.F. and Lir, S.A. (2005), "Optimization of cross section of reinforced concrete beam using experimental design", 6th World Congresses of Structural and Multidisciplinary Optimization, Brazil, May-June.
  16. Elliott, K. (2002), Precast Concrete Structures, CRC Press, Florida, U.S.A.
  17. Aziz, F.N.A.A., Ali, A.A.A., Jaafar, M.S., Samad, A.A.A. and Trikha, D.N. (2004), "Ultimate strength of precast concrete sandwich panel with opening under axial load", IEM J., 65(1/2), 8-12.
  18. Hamidian, M., Shariati, A., Khanouki, M.A., Sinaei, H., Toghroli, A. and Nouri, K. (2012), "Application of Schmidt rebound hammer and ultrasonic pulse velocity techniques for structural health monitoring", Sci. Res. Essay, 7(21), 1997-2001. https://doi.org/10.5897/SRE11.1387.
  19. Ho-Huu, V., Vo-Duy, T., Duong-Gia, D. and Nguyen-Thoi, T. (2018), "An efficient procedure for lightweight optimal design of composite laminated beams", Steel Compos. Struct., 27(3), 297-310. https://doi.org/10.12989/scs.2018.27.3.297.
  20. Hosseinpour, E., et al. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct.26(4), 485-499. https://doi.org/10.12989/scs.2018.26.4.485.
  21. Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2013), "Application of genetic programming (GP) and ANFIS for strength enhancement modeling of CFRPretrofitted concrete cylinders", Neural Comput. Appl., 23(2), 455-470. https://doi.org/10.1007/s00521-012-0941-2
  22. Arabnejad Khanouki, M.M., Ramli Sulong, N.H., Shariati, M. and Tahir, M.M. (2016), "Investigation of through beam connection to concrete filled circular steel tube (CFCST) column", J. Construct. Steel Res., 121, 144-162. https://doi.org/10.1016/j.jcsr.2016.01.002.
  23. Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A., and Tahir, M. (2017), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)", Earthq. Struct., 13(6), 531-538. https://doi.org/10.12989/EAS.2017.13.6.531
  24. Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M.M. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., 23(1), 67-85. https://doi.org/10.12989/scs.2017.23.1.067.
  25. Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.H. (2015), "Behavior of Tilted Angle Shear Connectors", PLoS ONE 10(12), 1-11. https://doi.org/10.1371/journal.pone.0144288.
  26. Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M.M., Baharom, S. and Azimi, M. (2016), "Strength prediction of rotary brace damper using MLR and MARS", Struct. Eng. Mech. 60(3), 471-488. https://doi.org/10.12989/sem.2016.60.3.471.
  27. Mansouri, I., Shariati, M., Safa, M., Ibrahim, Z., Tahir, M.M. and Petkovic, D. (2017), "Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique", J. Intelligent Manufact., 30(3), 1-11. https://doi.org/10.1007/s10845-017-1306-6.
  28. Mehrmashhadi, J., Chen, Z., Zhao, J. and Bobaru, F. (2019a), "A stochastically homogenized peridynamic model for intraply fracture in fiber-reinforced composites", engrXiv Preprints, 31. https://doi.org/10.31224/osf.io/tymhs.
  29. Mehrmashhadi, J., Bobaru, F. and Wang, L. (2019b), "Rapid Fabrication of Amphibious Bus with Low Rollover Risk: Toward Well-Structured Bus-Boat Using Truck Chassis", Smart Struct. Syst., 1-8, https://doi.org/10.31224/osf.io/46p9q. Accepted Paper.
  30. Mehrmashhadi, J., Tang, Y., Zhao, X., Xu, Z., Pan, J.J., Van Le, Q. and Bobaru, F. (2019c), "The Effect of Solder Joint Microstructure on the Drop Test Failure-A Peridynamic Analysis", IEEE T. Components, Packaging Manufact. Technol. 9(1), 58-71. https://doi.org/10.1109/TCPMT.2018.2862898
  31. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2014), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., 14(5), 785-809. http://dx.doi.org/10.12989/sss.2014.14.5.785.
  32. Mohammadhassani, M., Saleh, A., Suhatril, M., and Safa, M. (2015), "Fuzzy modelling approach for shear strength prediction of RC deep beams", Smart Struct. Syst., 16(3), 497-519. https://doi.org/10.12989/sss.2015.16.3.497.
  33. Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., 27(5), 537-543. https://doi.org/10.12989/scs.2018.27.5.537.
  34. Paknahad, M., Shariati, M., Sedghi, Y., Bazzaz, M. and Khorami, M. (2018), (2018), "Shear capacity equation for channel shear connectors in steel-concrete composite beams", Steel Compos. Struct., 28(4), 483-494. https://doi.org/10.12989/scs.2018.28.4.483.
  35. Petkovic, D., Issa, M., Pavlovic, N.D., Pavlovic, N.T. and Zentner, L. (2012), "Adaptive neuro-fuzzy estimation of conductive silicone rubber mechanical properties", Exp. Syst. Appl. 39(10), 9477-9482. https://doi.org/10.1016/j.eswa.2012.02.111.
  36. Rahmaninezhad, S.M., Yasrobi, S.S. and Eftekharzadeh, S.F. (2009), "Effects of compaction in the subgrade of the reinforced sand backfills with geotextile on bearing capacity", J. Civil Eng., 12, 320-328.
  37. Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., 22(4), 413-424. http://dx.doi.org/10.12989/sss.2018.22.4.413.
  38. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016a), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength", Steel Compos. Struct., 21(3), 679-688. https://doi.org/10.12989/scs.2016.21.3.679
  39. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016b), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength", Steel Compos. Struct., 21(3), 679-688. http://dx.doi.org/10.12989/scs.2016.21.3.679.
  40. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Moghimi Azar, V., Toghroli, A., Safa, M., Tonnizam Mohamad, E., Khorami, M., Wakil, K. (2018a), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., 22(3), 335-340. https://doi.org/10.12989/sss.2018.22.3.335.
  41. Shah, S.N.R., Ramli Sulong, N.H., Jumaat, M.Z. and Shariati, M. (2016a), "State-of-the-art review on the design and performance of steel pallet rack connections", Eng. Failure Anal., 66, 240-258. https://doi.org/10.1016/j.engfailanal.2016.04.017.
  42. Shah, S.N.R., Ramli Sulong, N.H., Shariati, M. and Jumaat, M.Z. (2015), "Steel Rack Connections: Identification of Most Influential Factors and a Comparison of Stiffness Design Methods", PloS one, 10(10), https://doi.org/10.1371/journal.pone.0139422.
  43. Shah, S.N.R., Ramli Sulong, N.H., Shariati M., Khan, R., Jumaat, Z. (2016b), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin Wall Struct. 106:471-483. https://doi.org/10.1016/j.tws.2016.05.021
  44. Shah, S.N.R., Ramli Sulong, N.H., Shariati, M., Khan, R. and Jumaat, M.Z. (2016c), "Behavior of industrial steel rack connections", Mech. Syst. Signal Processing, 70-71, 725-740. https://doi.org/10.1016/j.ymssp.2015.08.026
  45. Shahabi, S.E.M., Ramli Sulong, N.H., Shariati, M., Mohammadhassani, M. and Shah, S.N.R. (2016a), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., 20(3), 651-669. https://doi.org/10.12989/scs.2016.20.3.651
  46. Shahabi, S.E.M., Ramli Sulong, N.H., Shariati, M. and Shah, S. (2016b), "Performance of shear connectors at elevated temperatures-A review", Steel Compos. Struct., 20(1), 185-203. http://dx.doi.org/10.12989/scs.2016.20.1.185.
  47. Shariat, M. and Shariati, M., Madadi, A., Wakil, K. (2018), "Computational Lagrangian Multiplier Method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel. Compos. Struct., 29, 243-256. https://doi.org/10.12989/scs.2018.29.2.243.
  48. Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012a), "Investigation of channel shear connectors for composite concrete and steel T-beam", J. Phys. Sci., 7(11), 1828-1831.
  49. Shariati, A., Ramli Sulong, N.H. and Shariati, M. (2012b), "Various types of shear connectors in composite structures: A review", J. Phys. Sci., 7(22), 2876-2890.
  50. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012c), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Fifth International Conference on Engineering Failure Analysis, Hague, The Netherlands, July.
  51. Maleki, S. and Mahoutian, M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel & Composite Structures, Sydney, Australia, July.
  52. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Mahoutian, M. (2011a), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Sci. Res. Essay, 6(4), 977-983. https://doi.org/10.5897/SRE10.1120.
  53. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Khanouki, M.A. (2015), "Behavior of V-shaped angle shear connectors:experimental and parametric study", Mater. Struct., 49(9), 1-18. https://doi.org/10.1617/s11527-015-0762-8.
  54. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Kueh, A.B.H. (2016), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Construct. Build Mater., 120, 382-392. https://doi.org/10.1016/j.conbuildmat.2016.05.102.
  55. Shariati, M., Ramli Sulong, N.H., Sinaei, H., Arabnejad Khanouki, M.M., and Shafigh, P. (2011b), "Behavior of Channel Shear Connectors in Normal and Light Weight Aggregate Concrete (Experimental and Analytical Study)", Adv. Mater. Res., 168, 2303-2307. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2303.
  56. Shariati, M., Tahir, M.M., Wee, T.C., Shah, S.N.R., Jalali, A., Abdullahi, M.A.M. and Khorami, M. (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Failure Anal., 85, 149-166. https://doi.org/10.1016/j.engfailanal.2017.08.014.
  57. Shariati, M., Toghroli, A., Jalali, A., Ibrahim, A. (2017), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017, Zurich, Switzerland, July.
  58. Stone, W.C., Cheok, G.S. and Stanton, J.F. (1995), "Performance of hybrid moment-resisting precast beam-column concrete connections subjected to cyclic loading", Struct. J., 92(2), 229-249.
  59. Tahmasbi, F., Maleki, S., Shariati, M., Ramli Sulong, N.H. and Tahir, M.M. (2016), "Shear Capacity of C-Shaped and LShaped Angle Shear Connectors", PloS One 11(8), https://doi.org/10.1371/journal.pone.0156989.
  60. Toghroli, A. (2015), "Applications of the ANFIS and LR Models in the Prediction of Shear Connection in Composite Beams", Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
  61. Toghroli, A., Darvishmoghaddam, E., Zandi, Y., Parvan, M., Safa, M., Abdullahi, M.M., Heydari, A., Wakil, K. and Gebreel, S.A.M., Khorami, M. (2018), "Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method", Comput. Concrete, 21(5), 525-530. https://doi.org/10.12989/cac.2018.21.5.525.
  62. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intelligent Manufact, 29(8), 1-9.
  63. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., 17(5), 623-639. https://doi.org/10.12989/scs.2014.17.5.623
  64. Trikha, D.N. and Abang A. and Abang Abdullah (2004), Industrialised Building Systems, Universiti Putra Malaysia Press.
  65. Vo-Duy, T., Duong-Gia, D., Ho-Huu, V., Vu-Do, H. C. and Nguyen-Thoi, T. (2017), "Multi-objective optimization of laminated composite beam structures using NSGA-II algorithm", Compos. Struct., 168, 498-509. https://doi.org/10.1016/j.compstruct.2017.02.038.
  66. Vo-Duy, T., Ho-Huu, V. and Nguyen-Thoi, T. (2018), "Free vibration analysis of laminated FG-CNT reinforced composite beams using finite element method", Frontier. Struct. Civil Eng. 13(2), 324-336. https://doi.org/10.1007/s11709-018-0466-6
  67. Vo-Duy, T., Nguyen-Minh, N., Dang-Trung, H., Tran-Viet, A. and Nguyen-Thoi, T. (2015), "Damage assessment of laminated composite beam structures using damage locating vector (DLV) method", Frontier. Struct. Civil Eng. 9(4), 457-465. https://doi.org/10.1007/s11709-015-0303-0.
  68. Wang, Z., Qu, H., Li, T., Wei, H., Wang, H., Duan, H. and Jiang, H. (2018), "Quasi-static cyclic tests of precast bridge columns with different connection details for high seismic zones", Eng. Struct., 158, 13-27. https://doi.org/10.1016/j.engstruct.2017.12.035
  69. Wei, X., Shariati, M., Zandi, Y., Pei, S., Jin, Z., Gharachurlu, S., Abdullahi, M.M., Tahir, M.M. and Khorami, M. (2018), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., 27(3), 389-399. https://doi.org/10.12989/scs.2018.27.3.389.
  70. Weldu, M.T., Han, J., Rahmaninezhad, S.M., Parsons, R.L., Kakrasul, J.I. and Jiang, Y. (2016), "Effect of aggregate uniformity on pullout resistance of steel strip reinforcement", J. Transportation Res. Board, 2579(1), 1-7. https://doi.org/10.3141/2579-01.
  71. Yang, K.H. and Ashour, A.F. (2011), "Aggregate interlock in lightweight concrete continuous deep beams", Eng. Struct., 33(1), 136-145. https://doi.org/10.1016/j.engstruct.2010.09.026.
  72. Yasrobi, S.S., Rahmaninezhad, S.M. and Eftekharzadeh, S.F. (2009), "Large Physical Modeling to Optimize the Geometrical Conditions of Geotextile in Reinforced Loose Sand", GeoHunan International Conference, Changsha, Hunan, China, August.
  73. Zandi, Y., Shariati, M., Marto, A., Wei, X., Karaca, Z., Dao, D., Toghroli, A., Hashemi, M.H., Sedghi, Y., Walki, K. and Khorami, M. (2018), "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake", Steel Compos. Struct., 28(4), 439-447. https://doi.org/10.12989/scs.2018.28.4.439.
  74. Zhao, J., Chen, Z., Mehrmashhadi, J. and Bobaru, F. (2018), "Construction of a peridynamic model for transient advectiondiffusion problems", International Journal of Heat and Mass Transfer, 126, 1253-1266. https://doi.org/10.1016/j.ijheatmasstransfer.2018.06.075.

피인용 문헌

  1. Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS) vol.34, pp.1, 2019, https://doi.org/10.12989/scs.2020.34.1.155
  2. Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines vol.34, pp.3, 2019, https://doi.org/10.12989/scs.2020.34.3.347
  3. Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines vol.34, pp.3, 2019, https://doi.org/10.12989/scs.2020.34.3.377
  4. Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns vol.34, pp.5, 2019, https://doi.org/10.12989/scs.2020.34.5.743
  5. Elevated temperature resistance of concrete columns with axial loading vol.9, pp.4, 2019, https://doi.org/10.12989/acc.2020.9.4.355
  6. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2019, https://doi.org/10.12989/scs.2020.35.2.187
  7. Utilization of Support Vector Models and Gene Expression Programming for Soil Strength Modeling vol.45, pp.5, 2019, https://doi.org/10.1007/s13369-020-04441-6
  8. Influence of porosity and cement grade on concrete mechanical properties vol.10, pp.5, 2019, https://doi.org/10.12989/acc.2020.10.5.393
  9. Prediction of total sediment load: A case study of Wadi Arbaat in eastern Sudan vol.26, pp.6, 2019, https://doi.org/10.12989/sss.2020.26.6.781
  10. In-plane varying bending force effects on wave dispersion characteristics of single-layered graphene sheets vol.10, pp.2, 2021, https://doi.org/10.12989/anr.2021.10.2.101
  11. Ionic liquid coated magnetic core/shell CoFe2O4@SiO2 nanoparticles for the separation/analysis of trace gold in water sample vol.10, pp.3, 2019, https://doi.org/10.12989/anr.2021.10.3.295
  12. Assessment of microstructure and surface effects on vibrational characteristics of public transportation vol.11, pp.1, 2021, https://doi.org/10.12989/anr.2021.11.1.101
  13. Smart estimation of automatic approach in enhancing the road safety under AASHTO Standard specification and STM vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.389
  14. An optimized machine learning based moment-rotation analysis of steel pallet rack connections vol.79, pp.4, 2021, https://doi.org/10.12989/sem.2021.79.4.499
  15. Application of multi-hybrid metaheuristic algorithm on prediction of split-tensile strength of shear connectors vol.28, pp.2, 2019, https://doi.org/10.12989/sss.2021.28.2.167
  16. Analytical model for the basement wall horizontally supported by flexible floor diaphragms vol.79, pp.5, 2019, https://doi.org/10.12989/sem.2021.79.5.601
  17. Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method vol.40, pp.6, 2019, https://doi.org/10.12989/scs.2021.40.6.853
  18. Analyzing the energy performance of buildings by neuro-fuzzy logic based on different factors vol.23, pp.12, 2019, https://doi.org/10.1007/s10668-021-01382-4