Steel and Composite Structures

  • 제31권5호
  • /
  • Pages.427-435
  • /
  • 2019
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Estimation of moment and rotation of steel rack connections using extreme learning machine

  • Shariati, Mahdi (Division of Computational Mathematics and Engineering, Institute for Computational Science, Ton Duc Thang University) ;
  • Trung, Nguyen Thoi (Division of Computational Mathematics and Engineering, Institute for Computational Science, Ton Duc Thang University) ;
  • Wakil, Karzan (Research Center, Sulaimani Polytechnic University) ;
  • Mehrabi, Peyman (Department of Civil Engineering, K.N. Toosi University of Technology) ;
  • Safa, Maryam (Institute of Research and Development, Duy Tan University) ;
  • Khorami, Majid (Universidad UTE, Facultad de Arquitectura y Urbanismo)
  • 투고 : 2018.03.06
  • 심사 : 2019.05.07
  • 발행 : 2019.06.10
⟨ 이전 논문 다음 논문 ⟩

초록

The estimation of moment and rotation in steel rack connections could be significantly helpful parameters for designers and constructors in the initial designing and construction phases. Accordingly, Extreme Learning Machine (ELM) has been optimized to estimate the moment and rotation in steel rack connection based on variable input characteristics as beam depth, column thickness, connector depth, moment and loading. The prediction and estimating of ELM has been juxtaposed with genetic programming (GP) and artificial neural networks (ANNs) methods. Test outcomes have indicated a surpass in accuracy predicting and the capability of generalization in ELM approach than GP or ANN. Therefore, the application of ELM has been basically promised as an alternative way to estimate the moment and rotation of steel rack connection. Further particulars are presented in details in results and discussion.

키워드

참고문헌

  1. Abedini, M., Khlaghi, E.A., Mehrmashhadi, J., Mussa, M.H., Ansari, M. and Momeni, T. (2017), "Evaluation of Concrete Structures Reinforced with Fiber Reinforced Polymers Bars, A Review", J. Asian Sci. Res., 7(5), 165-175.
  2. Abedini, M., Mutalib, A.A., Mehrmashhadi, J., Raman, S.N., Alipour, R., Momeni, T. and Mussa, M.H. (2019), "Large Deflection Behavior Effect in Reinforced Concrete Columns Exposed to Extreme Dynamic Loads".
  3. Aghakhani, M., Suhatril, M., Mohammadhassani, M., Daie, M. and Toghroli, A. (2015), "A simple modification of homotopy perturbation method for the solution of Blasius equation in semi-infinite domains", Math. Problems Eng.
  4. Andalib, Z., Kafi, M.A., Kheyroddin, A. and Bazzaz, M. (2014), "Experimental investigation of the ductility and performance of steel rings constructed from plates", J. Constr. Steel Res., 103, 77-88. https://doi.org/10.1016/j.jcsr.2014.07.016
  5. Andalib, Z., Kafi, M.A., Kheyroddin, A., Bazzaz, M. and Momenzadeh, S. (2018), "Numerical evaluation of ductility and energy absorption of steel rings constructed from plates", Eng. Struct., 169, 94-106. https://doi.org/10.1016/j.engstruct.2018.05.034
  6. Anicic, O., Jovic, S., Skrijelj, H. and Nedic, B. (2017), "Prediction of laser cutting heat affected zone by extreme learning machine", Optics Lasers Eng., 88, 1-4. https://doi.org/10.1016/j.optlaseng.2016.07.005
  7. Annema, A.J., Hoen, K. and Wallinga, H. (1994), "Precision requirements for single-layer feedforward neural networks", Proceedings of the Fourth International Conference on Microelectronics for Neural Networks and Fuzzy Systems, pp. 145-151.
  8. Bazzaz, M., Kheyroddin, A., Kafi, M.A. and Andalib, Z. (2011), "Evaluating the performance of steel ring in special bracing frame", Proceedings of the 6th International Conference of Seismology and Earthquake Engineering.
  9. Bazzaz, M., Kheyroddin, A., Kafi, M.A. and Andalib, Z. (2012), "Modeling and Analysis of Steel Ring Devised in Off-centric Braced Frame with the Goal of Improving Ductility of Bracing Systems", Iran Scientific and Industrial Researches Organization; Tehran, Iran.
  10. Bazzaz, M., Kafi, M.A., Kheyroddin, A., Andalib, Z. and Esmaeili, H. (2014), "Evaluating the seismic performance of off-centre bracing system with circular element in optimum place", Int. J. Steel Struct., 14(2), 293-304. https://doi.org/10.1007/s13296-014-2009-x
  11. Bazzaz, M., Andalib, Z., Kheyroddin, A. and Kafi, M.A. (2015a), "Numerical comparison of the seismic performance of steel rings in off-centre bracing system and diagonal bracing system", Steel Compos. Struct., Int. J., 19(4), 917-937. https://doi.org/10.12989/scs.2015.19.4.917
  12. Bazzaz, M., Andalib, Z., Kafi, M.A. and Kheyroddin, A. (2015b), "Evaluating the performance of OBS-CO in steel frames under monotonic load", Earthq. Struct., Int. J., 8(3), 699-712. https://doi.org/10.12989/eas.2015.8.3.699
  13. Bazzaz, M., Darabi, M.K., Little, D.N. and Garg, N. (2018), "A straightforward procedure to characterize nonlinear viscoelastic response of asphalt concrete at high temperatures", Transportation research record. Transportation Research Board 96th Annual Meeting, 2672, 481-492.
  14. Bobaru, F.L.O.R.I.N., Mehrmashadi, J., Chen, Z.I.G.U.A.N.G. and Niazi, S.I.N.A. (2018), "Intraply Fracture in Fiber-Reinforced Composites, A Peridynamic Analysis", Proceedings of the American Society for Composites-Thirty-Third Technical Conference.
  15. Chen, C., Shi, L., Shariati, M., Toghroli, A., Mohamad, E.T., Bui, D.T. and Khorami, M. (2019), "Behavior of steel storage pallet racking connection-A review", Steel Compos. Compos., Int. J., 30(5), 457-469.
  16. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Compos., Int. J., 30(2), 141-147.
  17. Gilbert, B.P. and Rasmussen, K.J. (2009), "Experimental test on steel storage rack components", TUoS School of Civil Engineering, Australia (Ed.), School of Civil Engineering, The University of Sydney, Australia.
  18. Gilbert, B.P., Rasmussen, K.J., Baldassino, N., Cudini, T. and Rovere, L. (2012), "Determining the transverse shear stiffness of steel storage rack upright frames", J. Constr. Steel Res., 78, 107-116. https://doi.org/10.1016/j.jcsr.2012.06.012
  19. Hamidian, M., Shariati, A., Khanouki, M.A., Sinaei, H., Toghroli, A. and Nouri, K. (2012), "Application of Schmidt rebound hammer and ultrasonic pulse velocity techniques for structural health monitoring", Scientific Research and Essays, 7(21), 1997-2001.
  20. Heydari, A. and Shariati, M. (2018), "Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium", Struct. Eng. Mech., Int. J., 66(6), 737-748.
  21. Ho-Huu, V., Vo-Duy, T., Duong-Gia, D. and Nguyen-Thoi, T. (2018), "An efficient procedure for lightweight optimal design of composite laminated beams", Steel Compos. Struct., Int. J., 27(3), 297-310.
  22. Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct., Int. J., 26(4), 485-499.
  23. Huang, G.B., Zhu, Q.Y. and Siew, C.K. (2004), "Extreme learning machine, a new learning scheme of feedforward neural networks", Proceedings of 2004 IEEE International Joint Conference on Neural Networks.
  24. Huang, G.B., Chen, L. and Siew, C.K. (2006a), "Universal approximation using incremental constructive feedforward networks with random hidden nodes", Neural Networks, IEEE Transactions on, 17(4), 879-892. https://doi.org/10.1109/TNN.2006.875977
  25. Huang, G.B., Zhu, Q.Y. and Siew, C.K. (2006b), "Extreme learning machine, theory and applications", Neurocomputing, 70(1), 489-501. https://doi.org/10.1016/j.neucom.2005.12.126
  26. Huang, G.B., Zhu, Q.Y. and Siew, C.K. (2006c), "Real-time learning capability of neural networks", Neural Networks, IEEE Transactions on, 17(4), 863-878. https://doi.org/10.1109/TNN.2006.875974
  27. Ismail, M., Shariati, M., Awal, A., Chiong, C., Chahnasir, E., Porbar, A., Heydari, A. and Khorami, M. (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel Compos. Struct., Int. J., 28(6), 681-690.
  28. Kheyroddin, A., Bazzaz, M., Navan, Y.S. and Bazzaz, M. (2008), "The complication and weakness of construction of steel structure", Proceedings of the 14th International Civil Engineering Student Conference, Semnan, Iran, 14, 1-9.
  29. Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M. (2017a), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)", Eartq. Struct., Int. J., 13(6), 531-538.
  30. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M.M. (2017b), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., Int. J., 63(2), 259-268.
  31. Khu, S.T., Liong, S.Y., Babovic, V., Madsen, H. and Muttil, N. (2001), "Genetic Programming and Its Application in Real-Time Runoff Forecasting", JAWRA Journal of the American Water Resources Association, 37(2), 439-451. https://doi.org/10.1111/j.1752-1688.2001.tb00980.x
  32. Liang, N.Y., Huang, G.B., Saratchandran, P. and Sundararajan, N. (2006), "A fast and accurate online sequential learning algorithm for feedforward networks", Neural Networks, IEEE Transactions on, 17(6), 1411-1423. https://doi.org/10.1109/TNN.2006.880583
  33. Luo, Z., Sinaei, H., Ibrahim, Z., Shariati, M., Jumaat, Z., Wakil, K., Pham, B.T., Mohamad, E.T. and Khorami, M. (2019), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct., Int. J., 30(3), 271-280.
  34. Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M.M., Baharom, S. and Azimi, M. (2016), "Strength prediction of rotary brace damper using MLR and MARS", Struct. Eng. Mech., Int. J., 60(3), 471-488. https://doi.org/10.12989/sem.2016.60.3.471
  35. Mansouri, I., Shariati, M., Safa, M., Ibrahim, Z., Tahir, M.M. and Petkovic, D. (2017), "Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique", Journal of Intelligent Manufacturing, 1-11.
  36. Mehrmashhadi, J., Chen, Z., Zhao, J. and Bobaru, F. (2019a), "A Stochastically Homogenized Peridynamic Model for Intraply Fracture in Fiber-Reinforced Composites", 31.
  37. Mehrmashhadi, J., Tang, Y., Zhao, X., Xu, Z., Pan, J.J., Van Le, Q. and Bobaru, F. (2019b), "The Effect of Solder Joint Microstructure on the Drop Test Failure-A Peridynamic Analysis", IEEE Transactions on Components, Packaging and Manufacturing Technology, 9(1), 58-71. https://doi.org/10.1109/TCPMT.2018.2862898
  38. Mohammadhassani, M., Nezamabadi-Pour, H., Jumaat, M., Jameel, M., Hakim, S.J.S. and Zargar, M. (2013), "Application of the ANFIS model in deflection prediction of concrete deep beam", Struct. Eng. Mech., Int. J., 45(3), 319-332.
  39. Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2014), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., Int. J., 48(6), 833-848.
  40. Mohammadhassani, M., Saleh, A., Suhatril, M. and Safa, M. (2015), "Fuzzy modelling approach for shear strength prediction of RC deep beams", Smart Struct. Syst., Int. J., 16(3), 497-519. https://doi.org/10.12989/sss.2015.16.3.497
  41. Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., Int. J., 27(5), 537-543.
  42. Paknahad, M., Bazzaz, M. and Khorami, M. (2018), "Shear capacity equation for channel shear connectors in steel-concrete composite beams", Steel Compos. Struct., Int. J., 28(4), 483-494.
  43. Sadeghi Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., Int. J., 22(4), 413-424.
  44. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steelconcrete composite beam's shear strength", Steel Compos. Struct., Int. J., 21(3), 679-688. https://doi.org/10.12989/scs.2016.21.3.679
  45. Sajedi, F. and Shariati, M. (2019), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel Compos. Struct., Int. J., 30(5), 417-432.
  46. Sedghi, Y., Zandi, Y., Toghroli, A., Safa, M., Mohamad, E.T., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., Int. J., 22(3), 335-340.
  47. Shah, S.N.R., Sulong, N.R., Shariati, M. and Jumaat, M.Z (2015), "Steel Rack Connections, Identification of Most Influential Factors and a Comparison of Stiffness Design Methods", PloS one, 10(10), e0139422. https://doi.org/10.1371/journal.pone.0139422
  48. Shah, S.N.R., Sulong, N.R., Jumaat, M.Z. and Shariati, M. (2016a), "State-of-the-art review on the design and performance of steel pallet rack connections", Eng. Fail. Anal., 66, 240-258. https://doi.org/10.1016/j.engfailanal.2016.04.017
  49. Shah, S.N.R., Sulong, N.R., Shariati, M., Khan, R. and Jumaat, M.Z. (2016b), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin-Wall. Struct., 106, 471-483. https://doi.org/10.1016/j.tws.2016.05.021
  50. Shah, S.N.R., Sulong, N.R., Khan, R., Jumaat, M.Z. and Shariati, M. (2016c), "Behavior of industrial steel rack connections", Mech. Syst. Signal Process., 70-71, 725-740. https://doi.org/10.1016/j.ymssp.2015.08.026
  51. Shariat, M., Shariati, M., Madadi, A. and Wakil, K. (2018), "Computational Lagrangian Multiplier Method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel Compos. Struct., Int. J., 29(2), 243-256.
  52. Shariati, M., Sulong, H., Maleki, S. and Kh, M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel & Composite Structures, Sydney, Australia, July.
  53. Shariati, M., Sulong, H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Proceedings of the Fifth International Conference on Engineering Failure Analysis, The Hague, The Netherlands, July.
  54. Shariati, M., Sulong, N.R., Shariati, A. and Khanouki, M.A. (2015), "Behavior of V-shaped angle shear connectors, experimental and parametric study", Mater. Struct., 1-18.
  55. Shariati, M., Toghroli, A., Jalali A. and Ibrahim, Z. (2017), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Proceedings of the Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017, Zurich, Switzerland.
  56. Shariati, M., Tahir, M.M., Wee, T.C., Shah, S.N.R., Jalali, A., Abdullahi, M.A.M. and Khorami, M., (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail. Anal., 85, 149-166. https://doi.org/10.1016/j.engfailanal.2017.08.014
  57. Singh, T.N., Gulati, A., Dontha, L. and Bhardwaj, V. (2008), "Evaluating cut slope failure by numerical analysis-a case study", Nat. Hazards, 47(2), 263. https://doi.org/10.1007/s11069-008-9219-5
  58. Singh, R., Kainthola, A. and Singh, T.N. (2012), "Estimation of elastic constant of rocks using an ANFIS approach", Appl. Soft Comput., 12(1), 40-45. https://doi.org/10.1016/j.asoc.2011.09.010
  59. Toghroli, A. (2015), "Applications of the ANFIS and LR Models in the Prediction of Shear Connection in Composite Beams", Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
  60. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., Int. J., 17(5), 623-639. https://doi.org/10.12989/scs.2014.17.5.623
  61. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intel. Manuf., 1-9.
  62. Toghroli, A., Darvishmoghaddam, E., Zandi, Y., Parvan, M., Safa, M., Abdullahi, M.A.M., Heydari, A., Wakil, K., Gebreel, S.A. and Khorami, M. (2018), "Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method", Comput. Concrete, Int. J., 21(5), 525-530.
  63. Vo-Duy, T., Duong-Gia, D., Ho-Huu, V., Vu-Do, H.C. and Nguyen-Thoi, T. (2017), "Multi-objective optimization of laminated composite beam structures using NSGA-II algorithm", Compos. Struct., 168, 498-509. https://doi.org/10.1016/j.compstruct.2017.02.038
  64. Vo-Duy, T., Ho-Huu, V. and Nguyen-Thoi, T. (2018), "Free vibration analysis of laminated FG-CNT reinforced composite beams using finite element method", Front. Struct. Civil Eng., 13(2), 324-336. https://doi.org/10.1007/s11709-018-0466-6
  65. Wang, X. and Han, M. (2014), "Online sequential extreme learning machine with kernels for nonstationary time series prediction", Neurocomputing, 145, 90-97. https://doi.org/10.1016/j.neucom.2014.05.068
  66. Wei, X., Shariati, M., Zandi, Y., Pei, S., Jin, Z., Gharachurlu, S., Abdullahi, M.M., Tahir, M.M. and Khorami, M. (2018), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., Int. J., 27(3), 389-399.
  67. Xie, Q., Sinaei, H., Shariati, M., Khorami, M., Mohamad, E.T. and Bui, D.T. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel Compos. Struct., Int. J., 30(5), 433-441.
  68. Yu, Q., Miche, Y., Severin, E. and Lendasse, A. (2014), "Bankruptcy prediction using extreme learning machine and financial expertise", Neurocomputing, 128, 296-302. https://doi.org/10.1016/j.neucom.2013.01.063
  69. Zandi, Y., Shariati, M., Marto, A., Wei, X., Karaca, Z., Dao, D., Toghroli, A., Hashemi, M.H., Sedghi, Y., Wakil, K. and Khorami, M. (2018), "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake", Steel Compos. Struct., Int. J., 28(4), 439-447.

피인용 문헌

  1. Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS) vol.34, pp.1, 2019, https://doi.org/10.12989/scs.2020.34.1.155
  2. Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines vol.34, pp.3, 2019, https://doi.org/10.12989/scs.2020.34.3.347
  3. Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines vol.34, pp.3, 2019, https://doi.org/10.12989/scs.2020.34.3.377
  4. Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines vol.34, pp.3, 2019, https://doi.org/10.12989/scs.2020.34.3.377
  5. Elevated temperature resistance of concrete columns with axial loading vol.9, pp.4, 2019, https://doi.org/10.12989/acc.2020.9.4.355
  6. Computational analysis of three dimensional steel frame structures through different stiffening members vol.35, pp.2, 2019, https://doi.org/10.12989/scs.2020.35.2.187
  7. Utilization of Support Vector Models and Gene Expression Programming for Soil Strength Modeling vol.45, pp.5, 2019, https://doi.org/10.1007/s13369-020-04441-6
  8. Influence of porosity and cement grade on concrete mechanical properties vol.10, pp.5, 2019, https://doi.org/10.12989/acc.2020.10.5.393
  9. Influence of porosity and cement grade on concrete mechanical properties vol.10, pp.5, 2019, https://doi.org/10.12989/acc.2020.10.5.393
  10. Prediction of total sediment load: A case study of Wadi Arbaat in eastern Sudan vol.26, pp.6, 2019, https://doi.org/10.12989/sss.2020.26.6.781
  11. Ionic liquid coated magnetic core/shell CoFe2O4@SiO2 nanoparticles for the separation/analysis of trace gold in water sample vol.10, pp.3, 2019, https://doi.org/10.12989/anr.2021.10.3.295
  12. The compressive strength of concrete retrofitted with wind ash and steel slag pozzolans with a water-cement based polymers vol.11, pp.6, 2021, https://doi.org/10.12989/acc.2021.11.6.507
  13. Optimization algorithms for composite beam as smart active control of structures using genetic algorithms vol.27, pp.6, 2019, https://doi.org/10.12989/sss.2021.27.6.1041
  14. Smart estimation of automatic approach in enhancing the road safety under AASHTO Standard specification and STM vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.389
  15. An optimized machine learning based moment-rotation analysis of steel pallet rack connections vol.79, pp.4, 2021, https://doi.org/10.12989/sem.2021.79.4.499
  16. Application of multi-hybrid metaheuristic algorithm on prediction of split-tensile strength of shear connectors vol.28, pp.2, 2019, https://doi.org/10.12989/sss.2021.28.2.167
  17. Analytical model for the basement wall horizontally supported by flexible floor diaphragms vol.79, pp.5, 2019, https://doi.org/10.12989/sem.2021.79.5.601
  18. Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method vol.40, pp.6, 2019, https://doi.org/10.12989/scs.2021.40.6.853
  19. Numerical Evaluation of the Upright Columns with Partial Reinforcement along with the Utilisation of Neural Networks with Combining Feature-Selection Method to Predict the Load and Displacement vol.11, pp.22, 2019, https://doi.org/10.3390/app112211056
  20. Analyzing the energy performance of buildings by neuro-fuzzy logic based on different factors vol.23, pp.12, 2019, https://doi.org/10.1007/s10668-021-01382-4