DOI QR코드

DOI QR Code

Mechanical and Durability Characteristics of Latex-Modified Concrete Using Ultra Rapid Hardening Cement

초속경 시멘트를 이용한 라텍스 개질 콘크리트의 역학성능과 내구성능

  • Received : 2019.01.07
  • Accepted : 2019.05.14
  • Published : 2019.05.30

Abstract

The purpose of this study was to investigate the mechanical and durability characteristics of latex-modified concrete using ultra rapid hardening cement : four types of mechanical tests including compressive strength, modulus of elasticity, flexural strength and bond strength were performed; and seven types of durability tests including resistance of concrete to chloride ion penetration, freeze-thaw resistance, scaling resistance, coefficient of thermal expansion, cracking tendency, abrasion resistance and drying shrinkage were performed. Required material performance of each test was determined in accordance with the Korea specification for repair of concrete and pavement repairing materials. The test results satisfied the required material performances, and presented a good mechanical and durability characteristics. In particularly, the materials showed early development of compressive strength, flexural strength and bond strength at 3 and 4 hours after curing. SEM photos were also taken to investigate the micro structures of the materials after chloride ion penetration test.

Keywords

Acknowledgement

Supported by : (주)한국 리페어 기술, 대로 건설(주)

References

  1. Choi, P.G., Yun, K.K., & Lee, B.H. (2007). Characteristics of High Early Strength-Latex Modified concrete for Bridge Deck Overlays, In Fall Conference of the KSRE, October 2007, 493-498.
  2. Choi, P.G., Yun, K.K., & Lee, B.H. (2009). Autogenous Shrinkage of Very-Early Strength Latex-Modified Concrete with Retarder Contents, Jounal of the KSRE 11(2), 185-194.
  3. Jung, W.K., Lim, H.B., Kim, K.H., Kim, Y.K., Bai, J.O., & Yun, K.K. (2009). Field Application of Bonded Concrete Overlay by Very Early Strength Latex Modified Concrete, In Spring Conference of the Korea Concrete Institute, 21(1). 171-172.
  4. Kim, M.J., Shin, G.O., Joo, N.C., Lee, G.J., & Jeong, J.P. (2016). Vibration Properties of Concrete Overlays using RS-LMC, Journal of the Korea Concrete Institute 28(5), 571-579. https://doi.org/10.4334/JKCI.2016.28.5.571
  5. Kim, S.K., Yun, K.K., Kim, K.H., & Kim, Y.G. (2007). Evaluation of High Early Strength Latex Modified Concrete for Reparing Bridge Deck Pavement, n Fall Conference of the KSRE, October 2007, 163-166.
  6. Kim, T.K., Lee, S.J., Park, S.I., Lee, J.H., & Yun, K.K. (2001). LMC Field Application Using a Mobile Mixer and Equipments Developed in Korea, In Fall Conference of the Korea Concrete Institute, 13(2), 1215-1218.
  7. Son, M.K., & Choi, K.K. (2018). Experimental Study on Mechanical and Durability Characteristics of Latex Modified Concrete with Micre Steel Fibers, Journal of the Korea Concrete Institute 30(3), 1-8.
  8. Yun, K.K., Kim, K.H., Lee, J.H., Hong, C.W., & Kim, D.H. (2001). Strength Development Properties of Latex Modified Concrete For New Concrete Bridge Deck Overlay, Jounal of the KSRE 3(3), 135-146.
  9. Yun, K.K., Jung, W.K., Choi, S.R., Kim, D.H., & Lee, B.H. (2002). Durability of Latex-Modified Concrete with Rapid-Setting Cement, Jounal of the KSRE 4(2), 1-8.
  10. Yun, K.K., Lee, J.H., Hong, C.W., Kim, K.H., & Kim, T.K. (2001). Field Applicability Evaluaion of SB Latex-Modified Concrete for Concrete Bridge Deck Overlay, Jounal of the KSRE 3(4), 93-103.
  11. Han, S.W., Sung, S.K., Park, C.W., & Park, S.G. (2011) Durability of Latex Modified Concrete Using Blast-Furnace Slag Cement, In Fall Conference of the Korea Concrete Institute, 23(2), 715-716.
  12. Lee, W.H., & Han, C.H. (2010). Improvement of the Floor Impact Noise of Concrete Slab Using SBR Latex-Modified Mortar, Jounal of the Architectural Institute of Korea, Structure Section, 26(4), 79-86.
  13. Han, C.H., & Yeun, K.W. (2013). Mortar for improving of Floor impact noise of concrete slab, Patent Registration, 10-12396260000.
  14. Chang, S.H., & Park, S.K. (2003). Properties and Construction of Latex Modified Concrete for Concrete Bridge Deck Overlay, Journal of the Korea Concrete Institute 15(6), 78-84. https://doi.org/10.4334/JKCI.2003.15.1.078
  15. Ministry of Land, Infrastructure, and Transport (2015). Standard Specification of Road Construction, Republic of Korea, Seoul.
  16. Road and Transportation Research Institute (2017). Standard of Material Quality for Highway Construction, Korea Expressway Corporation.
  17. Road and Transportation Research Institute (2012). Expressway Construction Specification 13-3-1, Korea Expressway Corporation.
  18. American Association of State Highway and Transportation Officials (2005). Standard Practice for Estimating the Cracking Tendency of Concrete, AASHTO PP 34 99, Washington, D.C.
  19. American Association of State Highway and Transportation Officials (2000). Standard Method of Test for Coefficient of Thermal Expansion of Hydraulic Cement Concrete, AASHTO TP 60, Washington, D.C.
  20. Swedish Standards Institute (2005). Concrete testing-Hardening concrete-Scaling at freezing, SS 13 72 44 A, Stockholm.
  21. American Society for Testing and Materials (2012). Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces, ASTM C 779, West Conshohocken, PA.
  22. Korean Standard Association (2014). Standard test method for making and curing concrete specimens, KS F 2403.
  23. Korean Standard Association (2017). Standard test method for compressive strength of concrete, KS F 2405.
  24. Korean Standard Association (2016). Standard test method for flexural strength of concrete, KS F 2408.
  25. Korean Standard Association, (2015). Standard test method for length change of mortar and concrete, KS F 2424.
  26. Korean Standard Association (2017). Standard test method for static modulus of elasticity and Poisson's ratio in compression of cylindrical concrete specimens, KS F 2438.
  27. Korean Standard Association (2017). Standard test method for resistance of concrete to chloride ion penetration by electrical conductance, KS F 2711.
  28. Korean Standard Association (2018). Standard test method for resistance of concrete to rapid freezing and thawing, KS F 2456 A
  29. Korean Standard Association (2016). Standard test method for the bond strength of concrete repair and overlay materials by pull-off method, KS F 2762
  30. Bartlett & MacGregor, Statistical Analysis of the Compressive Strength of Concrete in Structures, ACI Materials Journal, March-April 1996, pp 158-168