Earthquakes and Structures

  • 제16권5호
  • /
  • Pages.523-532
  • /
  • 2019
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Seismic protection of LNG tanks with reliability based optimally designed combined rubber isolator and friction damper

  • Khansefid, Ali (Civil Engineering Department, Sharif University of Technology) ;
  • Maghsoudi-Barmi, Ali (Civil Engineering Department, Sharif University of Technology) ;
  • Khaloo, Alireza (Civil Engineering Department, Sharif University of Technology)
  • 투고 : 2018.10.10
  • 심사 : 2019.03.24
  • 발행 : 2019.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Different types of gas reservoir such as Liquid Natural Gas (LNG) are among the strategic infrastructures, and have great importance for any government or their private owners. To keep the tank and its contents safe during earthquakes especially if the contents are of hazardous or flammable materials; using seismic protection systems such as base isolator can be considered as an effective solution. However, the major deficiency of this system can be the large deformation in the isolation level which may lead to the failure of bearing system. In this paper, as a solution, the efficacy of an optimally designed combined vibration control system, the combined laminated rubber isolator and rotational friction damper, is investigated to evaluate the enhancement of an existing metal tank response under both far- and near-field earthquakes. Responses like impulsive and convective accelerations, base shear, and sloshing height are studied herein. The probabilistic framework is used to consider the uncertainties in the structural modeling, as well as record-to-record variability. Due to the high calculation cost of probabilistic methods, a simplified structural model is used. By using the Mont-Carlo simulation approach, it is revealed that this combined isolation system is a highly reliable system which provides considerable enhancement in the performance of reservoir, not only leads to the reduction of probability of catastrophic failure of the tank but also decrease the reservoir damage during the earthquake. Moreover, the relative displacement of the isolation level is controlled very well by this combined system.

키워드

참고문헌

  1. American Society of Civil Engineering (ASCE) (2016), ASCE7: Minimum Design Loads for Buildings and Other Structures, SEI, Reston, Virginia.
  2. Barmo, A., Mualla, I.H. and Hasan, H.T. (2015), "The behavior of multi-story buildings seismically isolated hybrid isolation (Friction, rubber and with the additional rotational friction damper)", J. Earthq. Res., 4, 1-13. http://dx.doi.org/10.4236/ojer.2015.41001.
  3. Beheshti Aval, S.B., Farrokhi, A., Fallah, A. and Tsouvalas, A. (2017), "The seismic reliability of two connected SMRF structures", Earthq. Struct., 13(2), 151-164. https://doi.org/10.12989/eas.2017.13.2.151.
  4. Calugaru, V. and Mahin, S.A. (2009), "Experimental and analytical studies of fixed-base and seismically isolated liquid storage tank", Proceedings of the 3rd International Conference on Advances in Experimental Structural Engineering, San-Francisco, USA.
  5. Castaldo, P., Palazzo, B. and Della Vecchia, P. (2015), "Seismic reliability of base-isolated structures with friction pendulum bearings", Eng. Struct., 95, 80-93. https://doi.org/10.1016/j.engstruct.2015.03.053.
  6. Castaldo, P., Palazzo, B. and Ferrentino, T. (2017), "Seismic reliability-based ductility demand evaluation for inelastic baseisolated structures with friction pendulum devices", Earthq. Eng. Struct. Dyn., 46(8), 1245-1266. https://doi.org/10.1002/eqe.2854.
  7. Cho, H.H., Kim, M.K., Lim, Y.M. and Cho, S.Y. (2004), "Seismic response of base isolated liquid storage tanks considering fluidstructure-soil interaction in time domain", Soil Dyn. Earthq. Eng., 24, 839-852. https://doi.org/10.1016/j.soildyn.2004.05.003.
  8. Chopra, A. (2011), Dynamics of Structures- Theory and Applications to Earthquake Engineering, Prentice Hall, India.
  9. Christopoulos, C., Filiatrault, A. and Bertero, V.V. (2006), Principle of Passive Supplemental Damping and Seismic Isolation, IUSS Press, Italy.
  10. EPS. Earthquake Protection Systems Inc. (2016), http://www.earthquakeprotection.com/industrial_liquefied_natural_gas_storage_tanks.html.
  11. Goudarzi, M.A. and Sabagh Yazdi, S.R. (2009), "Numerical investigation on accuracy of mass spring models for cylandrical tanks under seismic excitation", Int. J. Civil Eng., 7(3), 190-202.
  12. Housner, G.W. (1982), "Dynamic analysis of fluids in containers subject to acceleration", ASCE Technical Seminar, Los-Angeles, USA.
  13. Joint Committee of Structural Safety (2001), Probabilistic Model Code: Part III-Resistance Models, Denmark Technical University, Denmark.
  14. Khansefid, A. and Ahmadizadeh, M. (2016), "An investigation of the effects of structural nonlinearity on the seismic performance degradation of active and passive control systems used for supplemental energy dissipation", J. Vib. Control, 22(16), 3544-3554. https://doi.org/10.1177/1077546314563969.
  15. Khansefid, A. and Bakhshi, A. (2019), "Advanced two-step integrated optimization of actively controlled nonlinear structure under mainshock-aftershock sequences", J. Vib. Control, 22(4), 748-762. https://doi.org/10.1177/1077546318795533.
  16. Khansefid, A. and Vaezzadeh, A. (2015), "Probabilistic optimization of viscous dampers in non-linear structure", Proceedings of the 5th International Conference on Acoustics and Vibration, Tehran, Iran.
  17. Kim, M.K., Lim, Y.M., Cho, S.Y., Cho, K.H. and Lee, K.W. (2002), "Seismic analysis of base-isolated liquid storage tanks using the BE-FE-BE coupling technique", Soil Dyn. Earthq. Eng., 22(9-12), 1151-1158. https://doi.org/10.1016/S0267-7261(02)00142-2.
  18. Li, Z., He, M., Lam, F., Zhou, R. and Li, M. (2017), "Seismic reliability evaluation of steel-timber hybrid shear wall systems", Earthq. Struct., 13(3), 289-297. https://doi.org/10.12989/eas.2017.13.3.289.
  19. Mackay, D.J.C. (1998), Introduction to Monte Carlo Methods, in Learning in Graphical Models, MIT Press, Cambridge, USA.
  20. Malhotra, P.K. (1995), "Base uplift analysis of flexibly supported liquid storage tank", J. Earthq. Eng. Struct. Dyn., 24(12), 1591-1607. https://doi.org/10.1002/eqe.4290241204.
  21. Malhotra, P.K. (1997a), "Seismic response of soil-supported unanchored liquid storage tank", J. Struct. Eng., ASCE, 123(4), 440-450. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:4(440).
  22. Malhotra, P.K. (1997b), "New method for seismic isolation of liquid-storage tanks", J. Earthq. Eng. Struct. Dyn., 26(8), 839- 847. https://doi.org/10.1002/(SICI)1096-9845(199708)26:8<839::AID-EQE679>3.0.CO;2-Y.
  23. Malhotra, P.K. (1998), "Seismic strengthening of liquid storage tanks with energy-dissipating anchors", J. Struct. Eng., 124(4), 405-414. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:4(405).
  24. Malhotra, P.K. (2006), "Earthquake induced sloshing in tanks with insufficient freeboard", Struct. Eng. Int., 16(3), 222-225. https://doi.org/10.2749/101686606778026466
  25. Malhotra, P.K., Wenk, T. and Wieland, M. (2000), "Simple procedure for seismic analysis of liquid-storage tanks", Struct. Eng. Int., 10(3), 197-201. https://doi.org/10.2749/101686600780481509
  26. Marano, G.C. (2005), "Probabilistic seismic response and reliability assessment of isolated bridges", Earthq. Eng. Eng. Vib., 4(1), 95-106. https://doi.org/10.1007/s11803-005-0028-5.
  27. Nielsen, L.O., Mualla, I.H. and Iwai, Y. (2004). "Seismic Isolation with a new friction-viscoelastic damping system", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada.
  28. Panchal, V.R. and Jangid, R.S. (2008), "Variable friction pendulum system for seismic isolation of liquid storage tanks", Nucl. Eng. Des., 238(6), 1304-1315. https://doi.org/10.1016/j.nucengdes.2007.10.011.
  29. Panchal, V.R. and Jangid, R.S. (2011), "Seismic response of liquid storage steel tanks with variable frequency pendulum isolator", KSCE J. Civil Eng., 15(6), 1041-1055. https://doi.org/10.1007/s12205-011-0945-y.
  30. Panchal, V.R. and Jangid, R.S. (2012), "Behavior of liquid storage tanks with VCFPS under near-fault ground motions", Struct. Infrastr. Eng., 8(1), 71-88. https://doi.org/10.1080/15732470903300919.
  31. Petersen, M.D., Bryant, W.A., Cramer, C.H., Cao, T., Reichle, M.S., Frankel, A.D., Lienkaemper, J.J., McCrory, P.A. and Schwartz, D.P. (1996), "Probabilistic seismic hazard assessment for the state of California", California Department of Conservation Division of Mines and Geology, California.
  32. Razzaghi, M.S. and Eshghi, S. (2014), "Probabilistic seismic safety evaluation of precode cylandrical oil tank", J. Perform. Constr. Facil., 29(6), 04014170. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000669.
  33. Robert, C.P. and Casella, G. (2004), Monte Carlo Statistical Methods, Springer.
  34. SAC. Suites of Earthquake Ground Motions for Analysis of Steel Moment Frame Structures. (2010), http://nisee.berkeley.edu/data/strong_motion/sacsteel/ground_motions.html.
  35. Shekari, M.R., Khaji, N. and Ahmadi, M.T. (2009), "A coupled BE-FE study for evaluation of seismically isolated cylandrical liquid storage tanks considering fluid-structure interaction", J. Fluid Struct., 25, 567-585. https://doi.org/10.1016/j.jfluidstructs.2008.07.005.
  36. Shirmali, M.K. and Jangid, R.S. (2002), "Non-linear seismic response of base-isolated liquid storage tanks to bi-directional excitation", Nucl. Eng. Des., 217(1-2), 1-20. https://doi.org/10.1016/S0029-5493(02)00134-6.
  37. Shrestha, B., Hao, H., Ibrahim, N.H.J. and Bi, K. (2016), "On the effectiveness of rotational friction hinge damper to control responses of multi-span simply supported bridge to non-uniform ground motions", Adv. Struct. Eng., 19(10), 1575-1591. https://doi.org/10.1177/1369433216645974.
  38. Sistani, A., Asgarian, B. and Jalaeefar, A. (2013), "Reliability analysis of braced frames subjected to near field ground motions", Earthq. Struct., 5(6), 733-751. http://dx.doi.org/10.12989/eas.2013.5.6.733.
  39. STRABAG. STRABAG International GmbH (2017), http://www.strabag-international.com/databases/internet/_public/content.nsf/web/EN-STRABAGINTERNAT.COMlng.html#?men1=2&men2=1&sid=2328&h=15.
  40. Uckan, E., Akbas, B., Paolacci, F., Shen, J. and Abali, E. (2015), "Earthquake protection of liquid storage tanks by sliding isolation bearings", ASME 2015 Pressure Vessels and Piping Conference, Boston, USA.
  41. Veletsos, A.S. (1984), "Seismic response and design of liquid storage tanks", Guidelines for the Seismic Design of Oil and Gas Pipeline Systems, 255-370.
  42. Veletsos, A.S. and Tang Y. (1990), "Soil-structure interaction effect for laterally excited liquid storage tank", J. Earthq. Eng. Struct. Dyn., 19(4), 473-496. https://doi.org/10.1002/eqe.4290190402.
  43. Veletsos, A.S., Shivakumar, P., Tang, Y. and Tang, H.T. (1990), "Seismic response of anchored steel tank", Proceedings of the Third Symposium on Current Issues Related to Muclear Power Plant Structures, Equipment and Piping, North Carolina State University.
  44. Zhang, R., Weng, D. and Ren, X. (2011), "Seismic analysis of a LNG storage tank isolated by a multiple friction pendulum system", Earthq. Eng. Eng. Vib., 10(2), 253-262. https://doi.org/10.1007/s11803-011-0063-3.

피인용 문헌

  1. Shaking table test of liquid storage tank with finite element analysis considering uplift effect vol.77, pp.3, 2019, https://doi.org/10.12989/sem.2021.77.3.369