DOI QR코드

DOI QR Code

In-plane structural analysis of blind-bolted composite frames with semi-rigid joints

  • Waqas, Rumman (School of Civil and Environmental Engineering, The University of New South Wales) ;
  • Uy, Brian (School of Civil Engineering, The University of Sydney) ;
  • Wang, Jia (School of Civil Engineering, The University of Sydney) ;
  • Thai, Huu-Tai (Department of Infrastructure Engineering, The University of Melbourne)
  • 투고 : 2018.11.29
  • 심사 : 2019.03.31
  • 발행 : 2019.05.25

초록

This paper presents a useful in-plane structural analysis of low-rise blind-bolted composite frames with semi-rigid joints. Analytical models were used to predict the moment-rotation relationship of the composite beam-to-column flush endplate joints that produced accurate and reliable results. The comparisons of the analytical model with test results in terms of the moment-rotation response verified the robustness and reliability of the model. Abaqus software was adopted to conduct frame analysis considering the material and geometrical non-linearities. The flexural behaviour of the composite frames was studied by applying the lateral loads incorporating wind and earthquake actions according to the Australian standards. A wide variety of frames with a varied number of bays and storeys was analysed to determine the bending moment envelopes under different load combinations. The design models were finalized that met the strength and serviceability limit state criteria. The results from the frame analysis suggest that among lateral loads, wind loads are more critical in Australia as compared to the earthquake loads. However, gravity loads alone govern the design as maximum sagging and hogging moments in the frames are produced as a result of the load combination with dead and live loads alone. This study provides a preliminary analysis and general understanding of the behaviour of low rise, semi-continuous frames subjected to lateral load characteristics of wind and earthquake conditions in Australia that can be applied in engineering practice.

키워드

과제정보

연구 과제 주관 기관 : Australian Research Council (ARC)

참고문헌

  1. Abaqus (2014), User Manual; Version 6.14, DS SIMULIA Corp., Providence, RI, USA.
  2. Abolmaali, A., Matthys, J.H., Farooqi, M. and Choi, Y. (2005), "Development of moment-rotation model equations for flush end-plate connections", J. Constr. Steel Res., 61(12), 1595-1612. https://doi.org/10.1016/j.jcsr.2005.05.004
  3. Ahmed, B. and Nethercot, D.A. (1997), "Prediction of initial stiffness and available rotation capacity of major axis composite flush endplate connections", J. Constr. Steel Res., 41(1), 31-60. https://doi.org/10.1016/S0143-974X(96)00053-3
  4. AISC-LRFD (1994), Manual of steel construction, load and resistance factor design, (2nd Ed.).
  5. AS/NZS 1170.0-2002 (2002), Structural design actions. part 0: general principles; Australia.
  6. AS/NZS 1170.1-2002 (2002), Structural design actions. part 1: permanent, imposed and other actions; Australia.
  7. AS/NZS 1170.2-2011 (2011), Structural design actions. part 2: wind actions; Australia.
  8. AS/NZS 1170.4-2007 (2007), Structural design actions. Part 4: Earthquake actions in Australia; Australia.
  9. Beena, K., Naveen, K. and Shruti, S. (2017), "Behaviour of bolted connections in concrete-filled steel tubular beam-column joints", Steel Compos. Struct., Int. J., 25(4), 443-456.
  10. EN 1993-1-1 (2005), Eurocode 3: Design of steel structures. part 1-1: general rules and rules for buildings; European Committee for Standardization, Brussels, Belgium.
  11. EN 1993-1-8 (2010), Eurocode 3: Design of steel structures. part 1-8: design of joints; European Committee for Standardization, Brussels, Belgium.
  12. EN 1994-1-1 (2004), Eurocode 4: Design of composite steel and concrete structures. part 1-1: general rules and rules for buildings; European Committee for Standardization, Brussels, Belgium.
  13. EN 1998-1 (2004), Eurocode 8: Design of structures for earthquake resistance. part 1: general rules, seismic actions and rules for buildings; European Committee for Standardization, Brussels, Belgium.
  14. Ghobarah, A., Mourad, S. and Korol, R.M. (1996), "Momentrotation relationship of blind bolted connections for HSS columns", J. Constr. Steel Res., 40(1), 63-91. https://doi.org/10.1016/S0143-974X(96)00044-2
  15. Gomes, F., Jaspart, J.P. and Maquoi, R. (1994), "Behaviour of minor-axis joints and 3D joints", Proceedings of the Second State of the Art COST C1 Workshop on Semi Rigid Connections, Prague, Czech Republic, pp. 111-120.
  16. Gomes, F., Jaspart, J.P. and Maquoi, R. (1996), "Moment capacity of beam-to-column minor-axis joints, Proceedings of the Second State of the IABSE Colloquium on Semi-rigid Structural Connections, pp. 319-326.
  17. Han, L.H., Wang, W.D. and Zhao, X.L. (2008), "Behaviour of steel beam to concrete-filled SHS column frames: Finite element model and verifications", Eng. Struct., 30(6), 1647-1658. https://doi.org/10.1016/j.engstruct.2007.10.018
  18. Han, C., Li, Q., Wang, X., Jiang, W. and Li, W. (2016), "Research on rotation capacity of the new precast concrete assemble beamcolumn joints", Steel Compos. Struct., Int. J., 22(3), 613-625. https://doi.org/10.12989/scs.2016.22.3.613
  19. Hensman, J.S. and Nethercot, D.A. (2001), "Numerical study of unbraced composite frames: generation of data to validate use of the wind moment method of design", J. Constr. Steel Res., 57, 791-809. https://doi.org/10.1016/S0143-974X(01)00008-6
  20. Jeyarajan, S. and Liew, J.R. (2016), "Robustness analysis of 3D Composite buildings with semi-rigid joints and floor slab", Structures, 6, 20-29. https://doi.org/10.1016/j.istruc.2016.01.005
  21. Lee, S.S. and Moon, T.S. (2002), "Moment-rotation model of semi rigid connections with angles", Eng. Struct., 24, 227-237. https://doi.org/10.1016/S0141-0296(01)00066-9
  22. Liew, J.R., Teo, T.H., Shanmugam, N.E. and Yu, C.H. (2000), "Testing of steel -concrete composite connections and appraisal of results", J. Constr. Steel Res., 56(2), 117-150. https://doi.org/10.1016/S0143-974X(99)00099-1
  23. Loh, H.Y., Uy, B. and Bradford, M.A. (2006a), "The effects of partial shear connection in composite flush end plate joints - Part I - Experimental study", J. Constr. Steel Res., 62(4), 378-390. https://doi.org/10.1016/j.jcsr.2005.07.012
  24. Loh, H.Y., Uy, B. and Bradford, M.A. (2006b), "The effects of partial shear connection in composite flush end plate joints - Part II - Analytical study and design appraisal", J. Constr. Steel Res., 62(4), 391-412. https://doi.org/10.1016/j.jcsr.2005.07.010
  25. Li, D.X., Uy, B., Patel, V. and Aslani, F. (2017), "Analysis and design of demountable embedded steel column base connections", Steel Compos. Struct., Int. J., 23(3), 303-315. https://doi.org/10.12989/scs.2017.23.3.303
  26. Ma, H.W., Jiang, W.S. and Cho, C. (2011), "Experimental study on two types of new beam-to-column connections", Steel Compos. Struct., Int. J., 11(4), 291-305. https://doi.org/10.12989/scs.2011.11.4.291
  27. Nogueiro, P., Silva, L.S.D., Bento, R. and Simoes, R. (2009), "Calibration of model parameters for the cyclic response of end-plate beam-to-column steel-concrete composite joints", Steel Compos. Struct., Int. J., 9(1), 39-58.
  28. Thai, H.T. and Uy, B. (2015), "The application of Eurocode 4 to blind bolted endplate composite joint", Proceedings of the 2015 World Congress on Advances in Structural Engineering and Mechanics (ASEM), Incheon, Korea.
  29. Thai, H.T. and Uy, B. (2016), "Rotational stiffness and moment resistance of bolted endplate joints with hollow or CFST columns", J. Constr. Steel Res., 126, 139-152. https://doi.org/10.1016/j.jcsr.2016.07.005
  30. Thai, H.T., Uy, B., Kang, W.H. and Hicks, S. (2016), "System reliability evaluation of steel frames with semi-rigid connections", J. Constr. Steel Res., 121, 29-39. https://doi.org/10.1016/j.jcsr.2016.01.009
  31. Uy, B. (2012), "Applications, behaviour and design of composite steel-concrete structures", Adv. Struct. Eng., 15(9), 1559-1571. https://doi.org/10.1260/1369-4332.15.9.1559
  32. Uy, B., Patel, V., Li, D.X. and Aslani, F. (2017), "Behaviour and design of connections for demountable steel and composite structures", Structures, 9, 1-12. https://doi.org/10.1016/j.istruc.2016.06.005
  33. Wang, J., Uy, B. and Li, D. (2018a), "Analysis of demountable steel and composite frames with semi-rigid bolted joints", Steel Compos. Struct., Int. J., 28(3), 363-380.
  34. Wang, J., Uy, B., Thai, H.T. and Li, D.X. (2018b), "Behaviour and design of demountable beam-to-column composite bolted joints with extended end-plates", J. Constr. Steel Res., 144, 221-235. https://doi.org/10.1016/j.jcsr.2018.02.002
  35. Waqas, R., Uy, B. and Thai, T. (2015), "Parametric studies on the behaviour of beam-column flush endplate connections using blind bolts", Proceedings of the 2015 World Congress on Advances in Structural Engineering and Mechanics (ASEM), Incheon, Korea.
  36. Waqas, R., Uy, B. and Thai, T. (2019), "Experimental and numerical behaviour of blind bolted flush endplate composite connections", J. Constr. Steel Res., 153, 179-195 https://doi.org/10.1016/j.jcsr.2018.10.012
  37. Xiao, Y., Choo, B.S. and Nethercot, D.A. (1996), "Composite connections in steel and concrete. Part 2- Moment capacity of end plate beam to column connections", J. Constr. Steel Res., 37, 63-90. https://doi.org/10.1016/0143-974X(95)00015-N
  38. Yao, H., Goldsworthy, H. and Gad, E. (2009), "Design and analysis of a case study low-rise building with moment resisting composite frames", Australian Earthquake Engineering Society Conference, Newcastle, NSW, Australia.
  39. Yee, Y.L. and Melchers, R.E. (1986), "Moment-Rotation Curves for Bolted Connections", J. Struct. Eng., 112(3), 615-635. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:3(615)
  40. Zhao, H. (2016), "Analysis of seismic behavior of composite frame structures", Steel Compos Struct., Int. J., 20(3), 719-729. https://doi.org/10.12989/scs.2016.20.3.719