Advances in concrete construction

  • 제7권3호
  • /
  • Pages.143-150
  • /
  • 2019
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of steel fibres and nano silica on fracture properties of medium strength concrete

  • Murthy, A. Ramachandra (CSIR-Structural Engineering Research Centre) ;
  • Ganesh, P. (CSIR-Structural Engineering Research Centre)
  • 투고 : 2018.07.20
  • 심사 : 2019.02.06
  • 발행 : 2019.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

This study presents the fracture properties of nano modified medium strength concrete (MSC). The nano particle used in this study is nano silica which replaces cement about 1 and 2% by weight, and the micro steel fibers are added about 0.4% volume of concrete. In addition to fracture properties, mechanical properties, namely, compressive strength, split tensile strength, and flexural strength of nano modified MSC are studied. To ensure the durability of the MSC, durability studies such as rapid chloride penetration test, sorptivity test, and water absorption test have been carried out for the nano modified MSC. From the study, it is observed that significant performance improvement in nano modified MSC in terms of strength and durability which could be attributed due to the addition pozzolanic reaction and the filler effect of nano silica. The incorporation of nano silica increases the fracture energy about 30% for mix without nano silica. Also, size independent fracture energy is arrived using two popular methods, namely, RILEM work of fracture method with $P-{\delta}$ tail correction and boundary effect method. Both the methods resulted in nearly the same size-independent $G_F$ irrespective of the notch to depth ratio of the same specimen. This shows evidence that either of the two procedures could be used in practice for analysis of cracked concrete structures.

키워드

참고문헌

  1. Alireza, N.G., Suraya, A.R., Farah, N.A.A. and Mohamad, A.M.S. (2010), "Experimental investigation of the size effects of $SiO_{2}$ nano-particles on the mechanical properties of binary bended cement", Compos. Part B Eng., 41, 673-677. https://doi.org/10.1016/j.compositesb.2010.08.003
  2. ASTM C 1202 (2001), Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, ASTM, Philadelphia.
  3. ASTM C 1585 (2001), Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes, ASTM, Philadelphia.
  4. ASTM C 642 (2001), Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, ASTM, Philadelphia.
  5. Behfarnia, K. and Salemi, N. (2013), "The effects of nano silica and nano alumina on frost resistance of normal concrete", Constr. Build. Mater., 48, 580-584. https://doi.org/10.1016/j.conbuildmat.2013.07.088
  6. Elices, M., Guinea, G.V. and Planas, J. (1992), "Measurement of the fracture energy using three-point bend tests: part 3-Influence of cutting the P-${\delta}$ tail", Mater. Struct., 25, 137-163. https://doi.org/10.1007/BF02472426
  7. Florence, S. and Konstantin, S. (2010), "Nanotechnology in concrete - A review", Constr. Build. Mater., 24, 2060-2071. https://doi.org/10.1016/j.conbuildmat.2010.03.014
  8. Ganesh, P., Murthy, A.R.C., Sundar, K.S., Saffiq, M. and Iyer, N.R. (2015), "Effect of nano silica on durability and mechanical properties of high-strength concrete", Mag. Concrete Res., 68(5), 229-236.
  9. Guinea, G.V., Planas, J. and Elices, M. (1992), "Measurement of the fracture energy using three-point bend tests: part 1-Influence of experimental procedures", Mater. Struct., 25, 212-218. https://doi.org/10.1007/BF02473065
  10. Hu, X. and Wittmann, F. (1992), "Fracture energy and fracture process zone", Mater. Struct., 25, 319-326. https://doi.org/10.1007/BF02472590
  11. IS 10262 (2009), Guidelines for Concrete Mix Design Proportioning, BIS, New Delhi, India.
  12. IS 12269 (2013), Ordinary Portland Cement, 53 Grade Specification, BIS, New Delhi, India.
  13. IS 516 (1959), Methods of Tests for Strength of Concrete, BIS, New Delhi, India.
  14. IS 5816 (1999), Splitting Tensile Strength of Concrete - Method of Test, BIS, New Delhi, India.
  15. Karihaloo, B.L., Abdalla, H.M. and Imjai, T. (2003), "A simple method for determining the true specific fracture energy of concrete", Mag. Concrete Res., 55, 471-481. https://doi.org/10.1680/macr.2003.55.5.471
  16. Lincy, V., Lakshmy, P. and Roa, V.V.L.K. (2017), "A study on nano silica and micro silica added concretes under different transport mechanisms", Mag. Concrete Res., 70(23), 1205-1216. https://doi.org/10.1680/jmacr.16.00504
  17. Murthy, A.R.C., Ganesh, P., Sundar, K.S. and Iyer, N.R. (2015), "Fracture energy and tension softening relation for nanomodified concrete", Struct. Eng. Mech., 54(6), 1201-1216. https://doi.org/10.12989/sem.2015.54.6.1201
  18. Murthy, A.R.C., Iyer, N.R. and Raghu, R.B.K. (2013a), "Evaluation of mechanical properties for high strength and ultrahigh strength concretes", Adv. Concrete Constr., 1(4), 341-358. https://doi.org/10.12989/acc2013.1.4.341
  19. Murthy, A.R.C., Karihaloo, B.L., Iyer, N.R. and Raghu, R.B.K. (2013b), "Determination of Size-independent specific fracture energy of concrete mixes by two methods", Cement Concrete Res., 50, 19-25. https://doi.org/10.1016/j.cemconres.2013.03.015
  20. Nikolaos, D.A. and Pantazopoulou, S.J. (2015), "Microstructural behavior and mechanics of nano-modified cementitious materials", Adv. Concrete Constr., 3(1), 15-37. https://doi.org/10.12989/acc.2015.3.1.015
  21. Pacheco, T.F. and Said, J. (2011), "Nanotechnology: Advantages and drawbacks in the field of construction and building materials", Constr. Build. Mater., 25, 582-590. https://doi.org/10.1016/j.conbuildmat.2010.07.009
  22. Planas, J., Elices, M. and Guinea, G.V. (1992), "Measurement of the fracture energy using three-point bend tests: part 2-Influence of bulk energy dissipation", Mater. Struct., 25, 305-312. https://doi.org/10.1007/BF02472671
  23. RILEM TCM-85 (1985), "Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams", Mater. Struct., 18, 287-290. https://doi.org/10.1007/BF02472918
  24. Said, A.M., Zeidan, M.S., Bassuoni, M.T. and Tian, Y. (2012), "Properties of concrete incorporating nano-silica", Constr. Build. Mater., 36, 838-844. https://doi.org/10.1016/j.conbuildmat.2012.06.044
  25. Shiho, K., Pengkun, H., David, J.C. and Shah, S.P. (2013), "Modification of cement-based materials with nanoparticles", Cement Concrete Compos., 36, 8-15. https://doi.org/10.1016/j.cemconcomp.2012.06.012
  26. Singh, L.P., Karade, S.R., Bhattacharyya, S.K., Yousuf, M.M. and Ahalawat, S. (2013), "Beneficial role of nanosilica in cement based materials-A review", Constr. Build. Mater.,, 47, 1069-1077. https://doi.org/10.1016/j.conbuildmat.2013.05.052
  27. Vydra, V., Trtik, K. and Vodak, F. (2016), "Size independent fracture energy of concrete", Constr. Build. Mater., 26, 357-361. https://doi.org/10.1016/j.conbuildmat.2011.06.034
  28. Zhang, P., Chen, H.L., Qing, F.L., Tian, H.Z. and Peng, W. (2014), "Fracture properties of steel fibre reinforced high-performance concrete containing nano-$SiO_{2}$ and fly ash", Curr. Sci., 106(7), 980-987.

피인용 문헌

  1. Improving the flexural toughness behavior of R.C beams using micro/nano silica and steel fibers vol.11, pp.1, 2021, https://doi.org/10.12989/acc.2021.11.1.045
  2. Microstructure and mechanical behavior of cementitious composites with multi-scale additives vol.11, pp.2, 2019, https://doi.org/10.12989/acc.2021.11.2.163