References
- Baker, R. and Frydman, S. (1983), "Upper bound limit analysis of soil with non-linear failure criterion", Soil. Found., 23, 34-42. https://doi.org/10.3208/sandf1972.23.4_34.
- Chen, W.F. (1975), Limit Analysis and Soil Plasticity, Elsevier Science, Amsterdam, The Netherlands.
- Daraei, A. and Zare, S. (2018), "A new strain-based criterion for evaluating tunnel stability", Geomech. Eng., 16(2), 205-215. https://doi.org/10.12989/gae.2018.16.2.205.
- Fraldi, M. and Guarracino, F. (2010), "Analytical solutions for collapse mechanisms in tunnels with arbitrary cross sections", Int. J. Solid Struct., 47(2), 216-223. https://doi.org/10.1016/j.ijsolstr.2009.09.028.
- Hoek, E. and Brown, E.T. (1997), "Practical estimates of rock mass strength", Int. J. Rock Mech. Min. Sci., 34(8), 1165-1186. https://doi.org/10.1016/S1365-1609(97)80069-X.
- Hoek, E. and Brown, E.T. (1980), Underground excavations in rock. London: Institute of Mining and Metallurgy.
- Huang, X.L and Zhang, R. (2018), "Catastrophe stability analysis for shallow tunnels considering settlement", J. Cent. South Univ., 25(4), 949-960. https://doi.org/10.1007/s11771-018-3796-6.
- Li, T.Z. and Yang, X.L. (2018a), "Probabilistic stability analysis of subway tunnels combining multiple failure mechanisms and response surface method", Int. J. Geomech., 18(12), 04018167. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001315.
- Li, Y.X. and Yang, X.L. (2019), "Seismic displacement of 3D slope reinforced by piles with nonlinear failure criterion", Int. J. Geomech.,, 19(6), 04019042. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001411.
- Li, Z.W. and Yang, X.L. (2018b), "Active earth pressure for soils with tension cracks under steady unsaturated flow conditions", Can. Geotech. J., 55(12),1850-1859. https://doi.org/10.1139/cgj-2017-0713.
- Lin, P., Li, S.C., Xu, Z.H., Huang, X., Pang, D.D., Wang, X.T. and Wang, J. (2018), "Location determining method of critical sliding surface of fillings in a karst cave of tunnel", Geomech. Eng., 16(4), 415-421. https://doi.org/10.12989/gae.2018.16.4.415.
- Luo, W.J. and Yang, X.L. (2018), "3D stability of shallow cavity roof with arbitrary profile under influence of pore water pressure", Geomech. Eng.,16(6), 569-575. https://doi.org/10.12989/gae.2018.16.6.569.
- Nezhad, M.M., Fisher, Q.J., Gironacci, E. and Rezania, M. (2018), "Experimental study and numerical modeling of fracture propagation in shale rocks during Brazilian disk test", Rock Mech. Rock Eng., 51(6), 1755-1775. https://doi.org/10.1007/s00603-018-1429-x.
- Nezhad, M.M., Gironacci, E., Rezania, M. and Khalili, N. (2018), "Stochastic modelling of crack propagation in materials with random properties using isometric mapping for dimensionality reduction of nonlinear data sets", Int. J. Numer. Meth. Eng., 113(4), 656-680. https://doi.org/10.1002/nme.5630.
- Pan, Q. and Dias, D. (2018), "Three dimensional face stability of a tunnel in weak rock masses subjected to seepage forces", Tunn. Undergr. Sp. Technol., 71, .555-566. https://doi.org/10.1016/j.tust.2017.11.003.
- Qin, C.B. and Chian, S.C. (2017), "Kinematic analysis of seismic slope stability with a discretisation technique and pseudodynamic approach: a new perspective", Geotechnique, 68(6), 492-503. https://doi.org/10.1680/jgeot.16.P.200.
- Saada, Z., Maghous, S. and Garnier, D. (2012), "Stability analysis of rock slopes subjected to seepage forces using the modified Hoek-Brown criterion", Int. J. Rock Mech. Min. Sci., 55(1), 45-54. https://doi.org/10.1016/j.ijrmms.2012.06.010.
- Sahoo, J.P. and Kumar, J. (2018), "Required Lining Pressure for the stability of twin circular tunnels in soils", Int. J. Geomech., 18(7), 04018069. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001196.
- Sun, Z.B., Li, J., Pan, Q.J., Dias, D., Li, S. and Hou, C. (2018), "Discrete kinematic mechanism for nonhomogeneous slopes and its application", Int. J. Geomech., 18(12), 04018171. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001303.
- Xu, J.S., Li, Y.X. and Yang, X.L. (2018), "Seismic and static 3D stability of two-stage slope considering joined influences of nonlinearity and dilatancy", KSCE J. Civ. Eng., 22(10), 3827-3836. https://doi.org/10.1007/s12205-018-0636-z.
- Yang, X.L. and Chen, J.H. (2019), "Factor of safety of geosynthetic-reinforced slope in unsaturated soils", Int. J. Geomech., 19(6), 04019041. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001399.
- Yang, X.L. and Zhang, S. (2019), "Seismic active earth pressure for soils with tension cracks", Int. J. Geomech., 19(6), 06019009. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001414.
- Zhang, D.B., Jiang Y. and Yang, X.L. (2019), "Estimation of 3D active earth pressure under nonlinear strength condition", Geomech. Eng., 17(6), 515-525. https://doi.org/10.12989/gae.2019.17.6.569.
- Zhang, R. and Lu, S.P. (2018), "Kinematic analysis of shallow tunnel in layered strata considering joined effects of settlement and seepage", J. Cent. South Univ., 25(2), 368-378. https://doi.org/10.1007/s11771-018-3743-6.
- Zhang, R. and Smith, C.C. (2019), "Upper bound limit analysis of soils with a non-linear failure criterion", Can. Geotech. J., https://doi.org/10.1139/cgj-2018-0513.
- Zhang, R. and Yang, X.L. (2018), "Limit analysis of active and passive mechanisms of shallow tunnels in nonassociative soil with changing water table", Int. J. Geomech., 18(7), 04018063. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001167.
- Zhang, R. and Yang, X.L. (2019), "Limit analysis of anchor trapdoor embedded in nonhomogeneous and nonlinear soils", Int. J. Geomech. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001476.
- Zhu, J.Q. and Yang, X.L. (2018), "Probabilistic stability analysis of rock slopes with cracks", Geomech. Eng., 16(6), 655-667. https://doi.org/10.12989/gae.2018.16.6.655.
Cited by
- Prediction of the Collapse Region Induced by a Concealed Karst Cave above a Deep Highway Tunnel vol.2020, 2020, https://doi.org/10.1155/2020/8825262
- Kinematic Stability of Tunnel Face in Non-uniform Soils vol.24, pp.2, 2019, https://doi.org/10.1007/s12205-019-0996-z
- Three‐dimensional active earth pressure from cohesive backfills with tensile strength cutoff vol.44, pp.7, 2020, https://doi.org/10.1002/nag.3021