Structural Engineering and Mechanics

  • 제70권3호
  • /
  • Pages.289-301
  • /
  • 2019
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A new practical equivalent linear model for estimating seismic hysteretic energy demand of bilinear systems

  • Samimifar, Maryam (Department of Civil Engineering, Faculty of Engineering, Kharazmi University) ;
  • Massumi, Ali (Department of Civil Engineering, Faculty of Engineering, Kharazmi University) ;
  • Moghadam, Abdolreza S. (Structural Engineering Research Center, International Institute of Earthquake Engineering and Seismology)
  • 투고 : 2018.09.20
  • 심사 : 2019.02.24
  • 발행 : 2019.05.10
⟨ 이전 논문 다음 논문 ⟩

초록

Hysteretic energy is defined as energy dissipated through inelastic deformations during a ground motion by the system. It includes frequency content and duration of ground motion as two remarkable parameters, while these characteristics are not seen in displacement spectrum. Since maximum displacement individually cannot be the appropriate criterion for damage assessment, hysteretic energy has been evaluated in this research as a more comprehensive seismic demand parameter. An innovative methodology has been proposed to establish a new equivalent linear model to estimate hysteretic energy spectrum for bilinear SDOF models under two different sets of earthquake excitations. Error minimization has been defined in the space of equivalent linearization concept, which resulted in equivalent damping and equivalent period as representative parameters of the linear model. Nonlinear regression analysis was carried out for predicting these equivalent parameter as a function of ductility. The results also indicate differences between seismic demand characteristics of far-field and near-field ground motions, which are not identified by most of previous equations presented for predicting seismic energy. The main advantage of the proposed model is its independency on parameters related to earthquake and response characteristics, which has led to more efficiency as well as simplicity. The capability of providing a practical energy based seismic performance evaluation is another outstanding feature of the proposed model.

키워드

참고문헌

  1. Arroyo, D., and Ordaz, M. (2007), "On the estimation of hysteretic energy demands for SDOF systems", Earthq. Eng. Struct. Dyn., 36(15), 2365-2382. https://doi.org/10.1002/eqe.736.
  2. ATC-40 (1996), Seismic Evaluation and Retrofit of Concrete Building, Applied Technology Council, Redwood City, California, U.S.A.
  3. Browning, J., Warden, B., Matamoros, A. and Lepage, A. (2008), "Global and local seismic drift estimates for RC frames", Eng. Struct., 30(5), 1262-1271. https://doi.org/10.1016/j.engstruct.2007.07.003.
  4. Cheng, Y., Lucchini, A. and Mollaioli, F. (2015), "Correlation of elastic input energy equivalent velocity spectral values", Earthq. Struct., 8(5), 957-976. http://dx.doi.org/10.12989/eas.2015.8.5.957.
  5. D'Ambrisi, A. and Mezzi, M. (2015), "An energy-based approach for nonlinear static analysis of structures", Bull. Earthq. Eng., 13(5), 1513-1530. https://doi.org/10.1007/s10518-014-9673-2.
  6. Decanini, L.D. and Mollaioli, F. (2001), "An energy-based methodology for the assessment of seismic demand", Soil. Dyn. Earthq. Eng., 21(2), 113-137. https://doi.org/10.1016/S0267- 7261(00)00102-0.
  7. Dindar, A.A., Yalcin, C., Yuksel, E., Ozkaynak, H. and Buyukozturk, O. (2015), "Development of earthquake energy demand sp ect ra", Earthq. Spectr., 31(3), 1667-1689. https://doi.org/10.1193/011212EQS010M.
  8. Enderami, S.A., Beheshti-Aval, S.B. and Saadeghvaziri, M.A. (2014), "New energy based approach to predict seismic demands of steel moment resisting frames subjected to nearfault ground motions", Eng. Struct., 72, 182-192. https://doi.org/10.1016/j.engstruct.2014.04.029.
  9. Fajfar, P. and Vidic, T. (1994), "Consistent inelastic design spectra: Hysteretic and input energy", Earthq. Eng. Struct. Dyn., 23(5), 523-537. https://doi.org/10.1002/eqe.4290230505.
  10. Fatahi, B., Tabatabaiefar, H.R. and Samali, B. (2014), "Soilstructure interaction vs. Site effect for seismic design of tall buildings on soft soil", Geomech. Eng., 6(3), 293-320. http://dx.doi.org/10.12989/gae.2014.6.3.293.
  11. Fatahi, B., Tabatabaiefar, H.R. and Samali, B. (2011), Performance Based Assessment of Dynamic Soil-Structure Interaction Effects on Seismic Response of Building Frames, InGeo-Risk 2011: Risk Assessment and Management, 344-351.
  12. FEMA P695 (2009), Quantification of Building Seismic Performance Factors, Applied Technology Council for the Federal Emergency Management Agency, Washington, U.S.A.
  13. Gulkan, P. and Sozen, M.A. (1974). "Inelastic responses of reinforced concrete structure to earthquake motions", J. Am. Concrete Inst., 71(12), 604-610.
  14. Guyader, A.C. and Iwan, W.D. (2006), "Determining equivalent linear parameters for use in a capacity spectrum method of analysis", J. Struct. Eng., 132(1), 59-67. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:1(59).
  15. Housner, G.W. (1956), "Limit design of structures to resist earthquakes", Proceedings of the 1st WCEE, Berkeley, California, U.S.A.
  16. Iwan, W.D. (1980), "Estimating inelastic response spectra from elastic spectra", Earthq. Eng. Struct. Dyn., 8(4), 375-388. https://doi.org/10.1002/eqe.4290080407.
  17. Kalkan, E. and Kunnath, S.K. (2007), "Effective cyclic energy as a measure of seismic demand", J. Earthq. Eng., 11(5), 725-751. https://doi.org/10.1080/13632460601033827.
  18. Kowalsky, M.J. (1994), "Displacement-based design-a methodology for seismic design applied to RC bridge columns", M.Sc. Dissertation, University of California at San Diego, California, U.S.A.
  19. Kunnath, S.K. and Chai, Y.H. (2004), "Cumulative damage-based inelastic cyclic demand spectrum", Earthq. Eng. Struct. Dyn., 33(4), 499-520. https://doi.org/10.1002/eqe.363.
  20. Manfredi, G. (2001), "Evaluation of seismic energy demand", Earthq. Eng. Struct. Dyn., 30(4), 485-499. https://doi.org/10.1002/eqe.17.
  21. Manoukas, G.E., Athanatopoulou, A.M. and Avramidis, I.E. (2014), "Multimode pushover analysis based on energyequivalent SDOF systems", Struct. Eng. Mech., 51(4), 531-546. https://doi.org/10.12989/sem.2014.51.4.531.
  22. Massumi, A. and Gholami, F. (2016), "The influence of seismic intensity parameters on structural damage of RC buildings using principal components analysis", Appl. Math. Model., 40(3), 2161-2176. https://doi.org/10.1016/j.apm.2015.09.043.
  23. Mezgebo, M.G. (2015), "Estimation of earthquake input energy, hysteretic energy and its distribution in MDOF structures", Ph.D. Dissertation, Syracuse University, New York, U.S.A.
  24. Molazadeh, M. and Saffari, H. (2018), "The effects of ground motion duration and pinching-degrading behavior on seismic response of SDOF systems", Soil. Dyn. Earthq. Eng., 114, 333-347. https://doi.org/10.1016/j.soildyn.2018.06.032.
  25. Monavari, B. and Massumi, A. (2012), "Estimating displacement demand in reinforced concrete frames using some failure criteria", Int. J. Adv. Struct. Eng., 4(4), 1-6. https://doi.org/10.1186/2008-6695-4-4.
  26. Oguzmert, M., and Lui, E.M. (2011), "Seismic design of inelastic structures using equivalent linear system parameters: Part 1-derivation and comparison", IES J. Part A: Civil Struct. Eng., 4(2), 89-102. https://doi.org/10.1080/19373260.2011.566009.
  27. Otani, S., Hiraishi, H., Midorikawa, M. and Teshigawara, M. (2000), "New seismic design provisions in Japan", Proceedings of the 2nd US-Japan Workshop on Performance-Based Earthquake Engineering Methodology for Reinforced Concrete Structures, Sapporo, Hokkaido, Japan, September.
  28. Priestley, M.J.N., Kowalsky, M.J., Ranzo, G. and Benzoni, G. (1996), "Preliminary development of direct displacement-based design for multi-degree of freedom systems", Proceedings of the 65th Annual SEAOC Convention, Maui, Hawaii, U.S.A.
  29. Riddell, R. and Garcia, J.E. (2001), "Hysteretic energy spectrum and damage control", Earthq. Eng. Struct. Dyn., 30(12), 1791-1816. https://doi.org/10.1002/eqe.93.
  30. Samimifar, M. and Massumi, A. (2018), "Simplification and assessment of modal-based story damage index for reinforced concrete frames subjected to seismic excitations", J. Earthq. Eng., 22(3), 333-355. https://doi.org/10.1080/13632469.2016.1217803.
  31. Su, L., Xiao, N. and Wang, Y. (2012), "A statistical approach to determine 2D optimal equivalent linear parameters with application to earthquake engineering", Earthq. Eng. Eng. Vibr., 11(3), 415-425. https://doi.org/10.1007/s11803-012-0131-3.
  32. Sun, G., Gu, Q. and Fang, Y. (2017), "A simplified normalized cumulative hysteretic energy spectrum", Earthq. Struct., 12(2), 177-189. https://doi.org/10.12989/eas.2017.12.1.177.
  33. Uang, C.M. and Bertero, V.V. (1990), "Evaluation of seismic energy in structures", Earthq. Eng. Struct. Dyn., 19(1), 77-90. https://doi.org/10.1002/eqe.4290190108.
  34. Wang, F., Ke, K., Zhang, H. and Yam, M.C. (2018), "Constantductility-based energy factor demands of oscillators with modified Clough hysteretic model", Soil. Dyn. Earthq. Eng., 115, 36-40. https://doi.org/10.1016/j.soildyn.2018.08.014.
  35. Yaghmaei-Sabegh, S., Neekmanesh, S. and Lumantarna, E. (2014), "Nonlinear response estimates of RC frames using linear analysis of SDOF systems", Earthq. Eng. Struct. Dyn., 43(5), 769-790. https://doi.org/10.1002/eqe.2371.

피인용 문헌

  1. Derivation of yield force coefficient for RC frames considering energy balance and P-delta effects vol.79, pp.4, 2019, https://doi.org/10.12989/sem.2021.79.4.429
  2. Damping effect on seismic input energy and its verification by shake table tests vol.24, pp.12, 2019, https://doi.org/10.1177/13694332211010584