열전달 향상을 위한 나노물질 코팅재료의 영향에 대한 연구

Effect of nanoparticle material for heat transfer enhancement

  • 전용한 (상지영서대학교 소방안전과) ;
  • 김남진 (제주대학교 에너지공학과)
  • Jeon, Yong-Han (Department of Fire and protection, Sangji-Youngseo College) ;
  • Kim, Nam-Jin (Department of Nuclear & Energy Engineering, Jeju National University)
  • 투고 : 2019.02.19
  • 심사 : 2019.03.31
  • 발행 : 2019.03.31

초록

Nucleate boiling heat transfer is one of the most important phenomenon in the various industries. Especially, critical heat flux (CHF) refers to the upper limit of the pool boiling heat transfer region. Therefore, many researchers have found that CHF can be significantly increased by adding very small amounts of nanoparticles. In this study, the CHF and heat transfer coefficient were tested under the pool boiling state using copper and multi wall carbon nanotube nanoparticles. The results showed that two different types of nanoparticles deposited on the surface of two specimens made of the same material increased the heat flux in the nanoparticles with high conductivity, and there was no difference in the critical heat flux when the same material nanoparticles were deposited on the two different specimen surfaces.

키워드

과제정보

연구 과제 주관 기관 : 제주대학교

참고문헌

  1. Kim, M.H., Kim, J.B., and Kim, H.D., "Experimental studies on CHF characteristics of nano-fluids at pool boiling", Int. J. of Multiphase Flow, Vol. 33, pp. 691-706, 2007. https://doi.org/10.1016/j.ijmultiphaseflow.2007.02.007
  2. Kim, S.J., McKrell, T. Buongiorno, J., and Hu, L.W., "Experimental study of flow critical heat flux in alumina-water, zinc-oxide-water and diamond-water nanofluids", J. of Heat Transfer Vol. 131, No. 4, 2009.
  3. Song, S. L., Lee, J.H., and Chang, S.H., "CHF enhancement of SiC nanofluid in pool boiling experiment", Experimental Thermal and Fluid Science, Vol. 52, pp. 12-18, 2014. https://doi.org/10.1016/j.expthermflusci.2013.08.008
  4. Bi, J., Vafai, K., and Christopher, D.M., "Heat transfer characteristics and CHF prediction in nanofluid boiling", Int. J. of Heat and Mass Transfer, Vol. 80, pp. 256-265, 2015. https://doi.org/10.1016/j.ijheatmasstransfer.2014.09.019
  5. Kim, W.J., Jeon, Y.H., and Kim, N.J., "Study on the Oxidation Treatment of Nanoparticles for the Critical Heat Flux", J.l of the Korean Solar Energy Society, Vol. 37, No. 6, pp. 39-49, 2017. https://doi.org/10.7836/kses.2017.37.1.039
  6. Kline, S.J. and McClintock, F.A., "Describing uncertainties in single-sample experiment", Mechanical Engineer, Vol. 75, pp. 3-8, 1953.
  7. Zuber, N. "On stability of boiling heat transfer", ASME transactions, Vol. 80, pp. 711-714, 1958.