Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on 4-Axis Machining for Mono Pump Rotor

모노펌프 로터 4-축 가공에 관한 연구

  • 조현덕 (경일대학교 기계자동차학부) ;
  • 박종배 (경일대학교 기계자동차학부) ;
  • 왕사관 ((주)그린모빌리티) ;
  • 허유 (에이펙스펌프(주))
  • Received : 2018.10.02
  • Accepted : 2018.10.30
  • Published : 2019.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

Mono pump rotors are widely used in wastewater treatment plants, medicine, cosmetics, paint, paper, and chemical manufacturing, dairy production, public works, agriculture, and so on. A mono pump comprises two main parts: the rotor and stator. Typically, the rotor is machined using an expensive whirling machine. In this study, we developed an algorithm for 4-axis machining of the rotor on machining center (MCT). NC-code was obtained by applying the algorithm and finally the rotor of the mono pump was machined on a 4-axis MCT. Results of four sample experimental works showed close agreement with design geometries.

Keywords

References

  1. Cho, H. D., "A Study on 4-Axis Machining of Spiral Eccentric Shaft", KSMPE Spring Conference, pp. 44-44, 2016.
  2. Wang, S. K., "A Study on 4-Axis Machining of Mono Pump Rotor", Master's Thesis at Kyungil University, pp. 3-33, 2016.
  3. Cho, H. D., Yoon, M. C. and Kim, K. J. "5-Axis CNC Machining of Roller Gear Cam", Journal of the Korean Society of Machine Tool Engineers, Vol. 19, No. 6, pp. 739-745, 2010.
  4. Kim, J. S., Kang, S. K. and Lee, D. S., "A Study on the Machining Characteristics of Prototype of Roller Gear Cam", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 5, pp. 60-67, 2012.
  5. Jung, H. C., Hwang, J. D., Kim, S. M. and Jung Y. G., "The Postprocessor Technology of for 5-axis Control Machining", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 2, pp. 9-15, 2011.
  6. Hwang, J. D., Lim, E. S. and Jung, Y. G., "The Control Technology of Cutter Path and Cutter Posture for 5-axis Control Machining", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 2, pp. 1-8, 2011.
  7. Kim, H. J., Jang, J. H. and Kim, N. K., "A Study on Interference Phenomenon of a Machine Tool when 5 Axises Working with Virtual Machine Tool", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 4, No. 2, pp. 16-23, 2005.