Computers and Concrete

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Buckling analysis of concrete plates reinforced by piezoelectric nanoparticles

  • Taherifar, Reza (Department of Civil Engineering, Meymeh Branch, Islamic Azad University) ;
  • Mahmoudi, Maryam (Department of Computer Engineering, Meymeh Branch, Islamic Azad University) ;
  • Nasr Esfahani, Mohammad Hossein (Department of Mathematics, Faculty of Basic Science, Meymeh Branch, Islamic Azad University) ;
  • Khuzani, Neda Ashrafi (Department of Computer Engineering, Meymeh Branch, Islamic Azad University) ;
  • Esfahani, Shabnam Nasr (Department of Electrical Engineering, Meymeh Branch, Islamic Azad University) ;
  • Chinaei, Farhad (Department of Civil and Mineral Engineering, Meymeh Branch, Islamic Azad University)
  • Received : 2019.01.08
  • Accepted : 2019.04.05
  • Published : 2019.04.25
⟨ Previous Next ⟩

Abstract

In this paper, buckling analyses of composite concrete plate reinforced by piezoelectric nanoparticles is studied. The Halphin-Tsai model is used for obtaining the effective material properties of nano composite concrete plate. The nano composite concrete plate is modeled by Third order shear deformation theory (TSDT). The elastic medium is simulated by Winkler model. Employing nonlinear strains-displacements, stress-strain, the energy equations of concrete plate are obtained and using Hamilton's principal, the governing equations are derived. The governing equations are solved based on Navier method. The effect of piezoelectric nanoparticles volume percent, geometrical parameters of concrete plate and elastic foundation on the buckling load are investigated. Results showed that with increasing Piezoelectric nanoparticles volume percent, the buckling load increases.

Keywords

References

  1. Allahkarami, F., Nikkhah-bahrami, M. and Ghassabzadeh Saryazdi, M. (2018), "Nonlinear forced vibration of FG-CNTsreinforced curved microbeam based on strain gradient theory considering out-of-plane motion", Steel Compos. Struct, 22, 673-691.
  2. Gao, K., Gao, W., Chen, D. and Yang, J. (2018), "Nonlinear free vibration of functionally graded graphene concrete platelets reinforced porous nano composite concrete plates resting on elastic foundation", Compos. Struct., 204, 831-846. https://doi.org/10.1016/j.compstruct.2018.08.013
  3. Halpin, J.C. and Kardos, J.L. (1976), "The Halpin-Tsai equations: a review", Polym. Eng. Sci., 16(5), 344-352. https://doi.org/10.1002/pen.760160512
  4. Hosseini, S.M. and Zhang, Ch. (2018), "Elastodynamic and wave propagation analysis in a FG Graphene concrete plateletsreinforced nanocomposite cylinder using a modified nonlinear micromechanical model", Steel Compos. Struct., 27, 255-271. https://doi.org/10.12989/SCS.2018.27.3.255
  5. Kolahchi, R. and Cheraghbak, A. (2017), "Agglomeration effects on the dynamic buckling of visco elastic micro concrete plates reinforced with SWCNTs using Bolotin method", Nonlin. Dyn., 90, 479-492 https://doi.org/10.1007/s11071-017-3676-x
  6. Kumar, A., Chakrabarti, A. and Bhargava, P. (2014), "Accurate dynamic response of laminated composites and sandwich shells using higher order zigzag theory", Thin Wall. Struct., 77, 174-186. https://doi.org/10.1016/j.tws.2013.09.026
  7. Li, K., Wu, D., Chen X., Cheng J., Liu Zh., Gao, W. and M. Liu, (2018), "Isogeometric analysis of functionally graded porous concrete plates reinforced by graphene concrete platelets", Compos. Struct., 204, 114-130. https://doi.org/10.1016/j.compstruct.2018.07.059
  8. Liu, J., Wu, M., Yang, Y., Yang, G., Yan, H. and Jiang, K. (2018), "Preparation and mechanical performance of graphene concrete platelet reinforced titanium nanocomposites for high temperature applications", Comput. Concrete, 22, 355-363. https://doi.org/10.12989/CAC.2018.22.4.355
  9. Polit, O., Anant, C., Anirudh, B. and Ganapathi, M. (2019), "Functionally graded graphene reinforced porous nanocomposite curved beams: Bending and elastic stability using a higher-order model with thickness stretch effect", Compos. Part B: Eng., 166, 310-327. https://doi.org/10.1016/j.compositesb.2018.11.074
  10. Reddy, J.N. (2002), Mechanics of Laminated Composite Concrete Plates and Shells: Theory and Analysis, Second Edition, CRC Press.
  11. Rout, M., Hot, S.S. and Karmakar, A. (2019), "Thermoelastic free vibration response of graphene reinforced laminated composite shells", Eng. Struct., 178, 179-190 https://doi.org/10.1016/j.engstruct.2018.10.029
  12. Shokravi, M. (2017), "Buckling of sandwich concrete plates with FG-CNT-reinforced layers resting on orthotropic elastic medium using Reddy concrete plate theory", Steel Compos. Struct., 23, 623-631. https://doi.org/10.12989/SCS.2017.23.6.623
  13. Thai, H. and Vo, T. (2013), "A new sinusoidal shear deformation theory for bending, buckling and vibration of functionally graded concrete plates", Appl. Math. Model., 37, 3269-3281. https://doi.org/10.1016/j.apm.2012.08.008
  14. Thai, H., Park, M. and Choi, D. (2013), "A simple refined theory for bending, buckling, and vibration of thick concrete plates resting on elastic foundation", Int. J. Mech. Sci., 73, 40-52. https://doi.org/10.1016/j.ijmecsci.2013.03.017
  15. Wang, Y., Feng, Ch., Zhao, Zh. and Yang, J. (2018), "Eigenvalue buckling of functionally graded cylindrical shells reinforced with graphene concrete platelets (GPL)", Compos. Struct., 20, 238-246.

Cited by

  1. Analysis of orthotropic plates by the two-dimensional generalized FIT method vol.26, pp.5, 2019, https://doi.org/10.12989/cac.2020.26.5.421
  2. Buckling analysis of functionally graded plates using HSDT in conjunction with the stress function method vol.27, pp.1, 2019, https://doi.org/10.12989/cac.2021.27.1.073