Computers and Concrete

  • 제23권4호
  • /
  • Pages.281-294
  • /
  • 2019
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effect of cooling rate on the post-fire behavior of CFST column

  • 투고 : 2018.11.09
  • 심사 : 2019.03.30
  • 발행 : 2019.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

The post-fire behavior of structural elements and the cooling process has always been one of the main concerns of the structural engineers. The structures can be cooled at different rates, where they affect the structure's behavior. In the present study, a numerical model has been developed using the Abaqus program to investigate the effect of cooling rate on the post-fire behavior of the CFST column. To verify the model, results of an experimental study performed on CFST columns within a full heating and cooling cycle have been used. In this model, coMParison of the residual strength has been employed in order to examine the behavior of CFST column under different cooling rates. Furthermore, a parametric study was carried out on the strength of steel and concrete, the height of the specimens, the axial load ratio and the cross-sectional shape of the specimen through the proposed model. It was observed that the cooling rate affects the behavior of the column after the fire, and thus the higher the specimen's temperature is, the more effect it has on the behavior. It was also noticed that water cooling had slightly more residual strength than natural cooling. Furthermore, it was recognized from the parametric study, that by increasing the strength of steel and concrete and the load ratio, as well as modifying the cross-sectional shape from circular to square, residual strength of column at the cooling phase was less than that of the heating phase. In addition, with reducing column height, no change was witnessed in the column behavior after the cooling phase.

키워드

참고문헌

  1. Abbas, H., Al-Salloum, Y., Alsayed, S., Alhaddad, M. and Iqbal, R. (2017), "Post-heating response of concrete-filled circular steel columns", KSCE J. Civil Eng., 21(4), 1367-1378. https://doi.org/10.1007/s12205-016-0852-3
  2. Abdollahzaded, G.H. and Afaghi, D.A. (2017), "Effect of drywall and brick wall on fire behavior of concrete-filled steel tube column", Struct. Concrete, 19(3),851-863. https://doi.org/10.1002/suco.201700054
  3. Abdollahzadeh, G.H. and shalikar, R. (2017), "Retrofitting of steel moment-resisting frames under fire loading against progressive collapse", Int. J. Steel Struct., 17(4), 1597-1611. https://doi.org/10.1007/s13296-017-1225-6
  4. Abramowicz, M. and Kowalski, R. (2005), "The influence of short time water cooling on the mechanical properties of concrete heated up to high temperature", J. Civil Eng. Manage., 11(2), 85-90. https://doi.org/10.3846/13923730.2005.9636336
  5. Anderberg, Y. and Thelandersson, S. (1976), "Stress and deformation characteristics of concrete at high temperatures. 2. experimental investigation and material behaviour model", Bulletin of Division of Structural Mechanics and Concrete Construction, Bulletin 54.
  6. BS-476-20 (1987), Fire Tests on Building Materials and Structures Method for Determination of the Fire Resistance of Elements of Construction (General Principles).
  7. Chen, J., Young, B. and Uy, B. (2006), "Behavior of high strength structural steel at elevated temperatures", J. Struct. Eng., 132(12), 1948-1954. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:12(1948)
  8. Dimia, M.S., Guenfoud, M., Gernay, T. and Franssen, J.M. (2011), "Collapse of concrete columns during and after the cooling phase of a fire", J. Fire Protec. Eng., 21(4), 245-263. https://doi.org/10.1177/1042391511423451
  9. Dimia, M.S., Guenfoud, M., Gernay, T. and Franssen, J.M. (2011), "Collapse of concrete columns during and after the cooling phase of a fire", J. Fire Protec. Eng., 21(4), 245-263. https://doi.org/10.1177/1042391511423451
  10. Dimia, M.S., Sekkiou, S., Baghdadi, M. and Guenfoud, M. (2017), "Structural behaviour of concrete filled hollow steel sections exposed to parametric fire", Challenge, 3(4), 160-165.
  11. Ding, J. and Wang, Y.C. (2008), "Realistic modelling of thermal and structural behaviour of unprotected concrete filled tubular columns in fire", J. Constr. Steel Res., 64(10), 1086-1102. https://doi.org/10.1016/j.jcsr.2007.09.014
  12. Eurocode 1 (2002), Actions on Structures-Part 1-2: General Actions-Actions on Structures Exposed to Fire, British Standards Institution.
  13. Gernay, T. and Dimia, M.S. (2011), "Structural behavior of concrete columns under natural fires including cooling down phase", Proceedings of The International Conference on Recent Advances in Nonlinear Models-Structural Concrete Applications, 637-656.
  14. Gernay, T. and Dimia, M.S. (2013), "Structural behaviour of concrete columns under natural fires", Eng. Comput., 30(6), 854-872. https://doi.org/10.1108/EC-05-2012-0103
  15. Ghojel, J. (2004), "Experimental and analytical technique for estimating interface thermal conductance in composite structural elements under simulated fire conditions", Exp. Therm. Fluid Sci., 28(4), 347-354. https://doi.org/10.1016/S0894-1777(03)00113-4
  16. Gourley, B.C., Tort, C., Dennavit, M.D., Schiller, P.H. and Hajjar, J.F. (2001), "A synopsis of studies of the monotonic and cyclic behavior of concrete-filled steel tube beam-columns", ST-01-4, Institute of Technology University of Minnesota.
  17. Guergah, C., Dimia, M.S. and Guenfoud, M. (2018), "Contribution to the numerical modelling of the spalling phenomenon: Case of a reinforced concrete beams", Arab. J. Sci. Eng., 43(4), 1747-1759. https://doi.org/10.1007/s13369-017-2704-y
  18. Han, L.H. (2001), "Fire performance of concrete filled steel tubular beam-columns", J. Constr. Steel Res., 57(6), 697-711. https://doi.org/10.1016/S0143-974X(00)00030-4
  19. Han, L.H., Yang, H. and Cheng, S.L. (2002), "Residual strength of concrete filled RHS stub columns after high temperatures", Adv. Struct. Eng., 5(2), 123-134. https://doi.org/10.1260/1369433021502614
  20. Han, L.H., Yang, Y.F. and Xu, L. (2003), "An experimental study and calculation on the fire resistance of concrete-filled SHS and RHS columns", J. Constr. Steel Res., 59(4), 427-452. https://doi.org/10.1016/S0143-974X(02)00041-X
  21. Ibrahimbegovic, A., Boulkertous, A., Davenne, L., Muhasilovic, M. and Pokrklic, A. (2010), "On modeling of fire resistance tests on concrete and reinforced-concrete structures", Comput. Concrete, 7(4), 285-301. https://doi.org/10.12989/cac.2010.7.4.285
  22. Li, Y.H. and Franssen, J.M. (2011), "Test results and model for the residual compressive strength of concrete after a fire", J. Struct. Fire Eng., 2(1), 29-44. https://doi.org/10.1260/2040-2317.2.1.29
  23. Liang, J.F., Wang, E., Zhou, X. and Le, Q.L. (2018), "Influence of high temperature on mechanical properties of concrete containing recycled fine aggregate", Comput. Concrete, 21(1), 87-94. https://doi.org/10.12989/CAC.2018.21.1.087
  24. Liang, J.F., Yang, Z.P., Yi, P.H. and Wang, J.B. (2017), "Stressstrain relationship for recycled aggregate concrete after exposure to elevated temperatures", Comput. Concrete, 19(6), 609-615. https://doi.org/10.12989/CAC.2017.19.6.609
  25. Lie, T.T. (1994), "Fire resistance of circular steel columns filled with bar-reinforced concrete", J. Struct. Eng., 120(5), 1489-1509. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:5(1489)
  26. Lie, T.T. and Chabot, M. (1992), "Experimental studies on the fire resistance of hollow steel columns filled with plain concrete", NRC-IRC-4196, National Research Council Canada.
  27. Lie, T.T. and Irwin, RJ. (1995), "Fire resistance of rectangular steel columns filled with bar-reinforced concrete", J. Struct. Eng., 121(5), 797-805. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:5(797)
  28. Lu, J., Liu, H., Chen, Z. and Liao, X. (2016), "Experimental investigation into the post-fire mechanical properties of hotrolled and cold-formed steels", J. Constr. Steel Res., 121, 291-310. https://doi.org/10.1016/j.jcsr.2016.03.005
  29. Outinen, J. and Makelainen, P. (2004), "Mechanical properties of structural steel at elevated temperatures and after cooling down", Fire Mater., 28(2-4), 237-51. https://doi.org/10.1002/fam.849
  30. Ozbolt, J., Periskic, G., Reinhardt, H.W. and Eligehausen, R. (2008), "Numerical analysis of spalling of concrete cover at high temperature", Comput. Concrete, 5(4), 279-293. https://doi.org/10.12989/cac.2008.5.4.279
  31. Peng, G., Nakamura, S., Zhu, X., Wu, Q. and Wang, H. (2017), "An experimental and numerical study on temperature gradient and thermal stress of CFST truss girders under solar radiation", Comput. Concrete, 20(5), 605-616. https://doi.org/10.12989/CAC.2017.20.5.605
  32. Sakumoto, Y., Okada, T., Yoshida, M. and Tasaka, S. (1994), "Fire resistance of concrete-filled, fire-resistant steel-tube columns", J. Mater. Civil Eng., 6(2), 169-184. https://doi.org/10.1061/(ASCE)0899-1561(1994)6:2(169)
  33. Song, T.Y., Han, L.H. and Yu, H.X. (2010), "Concrete filled steel tube stub columns under combined temperature and loading", J. Constr. Steel Res., 66(3), 369-384. https://doi.org/10.1016/j.jcsr.2009.10.010
  34. Tan, Q., Gardner, L. and Han, L.H. (2018), "Performance of steelreinforced concrete-filled stainless steel tubular columns at elevated temperature", Int. J. Struct. Stab. Dyn., 19(1), 1940002. https://doi.org/10.1142/s0219455419400029
  35. Yang, H., Han L.H. and Wang, Y.C. (2008), "Effects of heating and loading histories on post fire cooling behaviour of concrete filled steel tubular columns", J. Constr. Steel Res., 64(5), 556-570. https://doi.org/10.1016/j.jcsr.2007.09.007
  36. Yang, H., Liu, F. and Gardner, L. (2013), "Performance of concrete-filled RHS columns exposed to fire on 3 sides", Eng. Struct., 56, 1986-2004. https://doi.org/10.1016/j.engstruct.2013.08.019
  37. Yao, Y. and Hu, X.X. (2015), "Cooling behavior and residual strength of post-fire concrete filled steel tubular columns", J. Constr. Steel Res., 112, 282-292. https://doi.org/10.1016/j.jcsr.2015.05.020
  38. Yu, M., Zha, X., Ye, J. and Li, Y. (2010), "Fire response and resitance of concrete-filled steel tubular frame structures", Int. J. Struct. Stab. Dyn., 10(2), 253-271.
  39. Zhang, J.B., Xu, Z.D., Han, J.S. and Wang, X.D. (2011), "Prediction of the thermal contact resistance at the steelconcrete interface of CFST columns with circular crosssection", Mech. Adv. Mater. Struct., 19, 530-542. https://doi.org/10.1080/15376494.2011.563405

피인용 문헌

  1. Analytical post-heating behavior of concrete-filled steel tubular columns containing tire rubber vol.26, pp.6, 2019, https://doi.org/10.12989/cac.2020.26.6.467
  2. An experimental and numerical analysis of concrete walls exposed to fire vol.77, pp.6, 2021, https://doi.org/10.12989/sem.2021.77.6.819
  3. Compressive strength of circular concrete filled steel tubular stubs strengthened with CFRP vol.39, pp.2, 2019, https://doi.org/10.12989/scs.2021.39.2.189