Structural Engineering and Mechanics

  • 제70권2호
  • /
  • Pages.169-178
  • /
  • 2019
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Traffic control technologies without interruption for component replacement of long-span bridges using microsimulation and site-specific data

  • Zhou, Junyong (College of Civil Engineering, Guangzhou University) ;
  • Shi, Xuefei (Department of Bridge Engineering, Tongji University) ;
  • Zhang, Liwen (College of Civil Engineering, Guangzhou University) ;
  • Sun, Zuo (College of Civil Engineering, Guangzhou University)
  • 투고 : 2018.09.02
  • 심사 : 2019.02.20
  • 발행 : 2019.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

The replacement of damaged components is an important task for long-span bridges. Conventional strategy for component replacement is to close the bridge to traffic, so that the influence of the surrounding environment is reduced to a minimum extent. However, complete traffic interruption would bring substantial economic losses and negative social influence nowadays. This paper investigates traffic control technologies without interruption for component replacement of long-span bridges. A numerical procedure of traffic control technologies is proposed incorporating traffic microsimulation and site-specific data, which is then implemented through a case study of cable replacement of a long-span cable-stayed bridge. Results indicate traffic load effects on the bridge are lower than the design values under current low daily traffic volume, and therefore cable replacement could be conducted without traffic control. However, considering a possible medium or high level of daily traffic volume, traffic load effects of girder bending moment and cable force nearest to the replaced cable become larger than the design level. This indicates a potential risk of failure, and traffic control should be implemented. Parametric studies show that speed control does not decrease but increase the load effects, and flow control using lane closure is not effectual. However, weight control and gap control are very effective to mitigate traffic load effects, and it is recommended to employ a weight control with gross vehicle weight no more than 65 t or/and a gap control with minimum vehicle gap no less than 40 m for the cable replacement of the case bridge.

키워드

과제정보

연구 과제 주관 기관 : National Nature Science Foundation of China

참고문헌

  1. Caprani, C.C. (2012), "Calibration of a congestion load model for highway bridges using traffic microsimulation", Struct. Eng. Int., 22(3), 342-348. https://doi.org/10.2749/101686612X13363869853455
  2. Chen, S.R. and Wu, J. (2011), "Modeling stochastic live load for long-span bridge based on microscopic traffic flow simulation", Comput. Struct., 89(9-10), 813-824. https://doi.org/10.1016/j.compstruc.2010.12.017
  3. Cremona, C. (2001), "Optimal extrapolation of traffic load effects", Struct. Safety, 23(1), 31-46. https://doi.org/10.1016/S0167-4730(00)00024-2
  4. Dekker, R., Wildeman, R.E. and Van der Duyn Schouten, F.A. (1997), "A review of multi-component maintenance models with economic dependence", Math. Meth. Operat. Res., 45(3), 411-435. https://doi.org/10.1007/BF01194788
  5. Feng, D., Mauch, C., Summervile, S. and Fernandez, O. (2018), "Suspender replacement for a signature bridge: A case study", J. Brid. Eng., In Press.
  6. Frangopol, D.M., Dong, Y. and Sabatino, S. (2017), "Bridge lifecycle performance and cost: Analysis, prediction, optimisation and decision-making", Struct. Infrastruct. Eng., 13(10), 1239-1257. https://doi.org/10.1080/15732479.2016.1267772
  7. Fu, Z., Ji, B., Yang, M., Sun, H. and Maeno, H. (2013), "Cable replacement method for cable-stayed bridges based on sensitivity analysis", J. Perform. Constr. Facilt., 29(3), 04014085.
  8. Guo, T., Frangopol, D.M. and Chen, Y. (2012), "Fatigue reliability assessment of steel bridge details integrating weigh-in-motion data and probabilistic finite element analysis", Comput. Struct., 112, 245-257. https://doi.org/10.1016/j.compstruc.2012.09.002
  9. Karbhari, V.M. (2009), Design Principles for Civil Structures, John Wiley & Sons, Ltd., New Jersey, U.S.A.
  10. Kim, S. and Kang, Y.J. (2016), "Structural behavior of cablestayed bridges after cable failure". Struct. Eng. Mech., 59(6), 1095-1120. https://doi.org/10.12989/sem.2016.59.6.1095
  11. Lecroq, P., Virlogeux, M., Foucriat, J.C. and Bietry, J. (2001), "Replacement of the suspension cables of the Tancarville bridge". Proceedings of the ABSE Symposium Report, Seoul, Korea, June.
  12. Lipari, A., Caprani, C.C. and O'Brien, E.J. (2017), "Heavy-vehicle gap control for bridge loading mitigation", IEEE Intell. Transp. Syst. Mag., 9(4), 118-131. https://doi.org/10.1109/MITS.2017.2743169
  13. Marzahn, G.A., Sieberth, S. and Gurtmann, S. (2009), "Replacing stay-cables of the Rhine Rrver bridge rheinbrucke flehe without traffic interruption", Proceedings of the Structures Congress on Don't Mess with Structural Engineers: Expanding Our Role, Texas, U.S.A., May.
  14. Mehrabi, A.B., Ligozio, C.A., Ciolko, A.T. and Wyatt, S.T. (2010), "Evaluation, rehabilitation planning, and stay-cable replacement design for the Hale Boggs bridge in Luling, Louisiana", J. Brid. Eng., 15(4), 364-372. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000061
  15. Ministry of Transport of the People's Republic of China (MOT) (2014), Technical Standard of Highway Engineering, China Communication Press, Beijing, China.
  16. Ministry of Transport of the People's Republic of China (MOT) (2015), General Specifications for Design of Highway Nridges and Culverts, China Communication Press, Beijing, China.
  17. Nagel, K. and Schreckenberg, M. (1992), "A cellular automaton model for freeway traffic", J. Phys. I, 2(12), 2221-2229. https://doi.org/10.1051/jp1:1992277
  18. O'Brien, E.J., Hayrapetova, A. and Walsh, C. (2012), "The use of micro-simulation for congested traffic load modeling of medium-and long-span bridges", Struct. Infrastruct. Eng., 8(3), 269-276. https://doi.org/10.1080/15732471003640477
  19. Ruan, X., Zhou, J., Shi, X. and Caprani, C.C. (2017a), "A sitespecific traffic load model for long-span multi-pylon cablestayed bridges", Struct. Infrastruct. Eng., 13(4), 494-504. https://doi.org/10.1080/15732479.2016.1164724
  20. Ruan, X., Zhou, J., Tu, H., Jin, Z. and Shi, X. (2017b), "An improved cellular automaton with axis information for microscopic traffic simulation", Transp. Res. Part C: Emerg. Technol., 78, 63-77. https://doi.org/10.1016/j.trc.2017.02.023
  21. Sandberg, J. and Hendy, C.R. (2010), "Replacement of the stays on a major cable-stayed bridge", Proceedings of the Institution of Civil Engineers-Bridge Engineering, 163(1), 31-42. https://doi.org/10.1680/bren.2010.163.1.031
  22. Sun, Z., Ning, S. and Shen, Y. (2017), "Failure investigation and replacement implementation of short suspenders in a suspension bridge", J. Brid. Eng., 22(8), 05017007. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001089
  23. Treiber, M., Hennecke, A. and Helbing, D. (2000), "Congested traffic states in empirical observations and microscopic simulations", Phys. Rev. E, 62(2), 1805-1824. https://doi.org/10.1103/PhysRevE.62.1805
  24. Wang, L., Li, A., Ma, X. and Ding, S. (2012), "Stay-cable maintenance and replacement strategy based on lifetime functions", Chin. Civil Eng. J., 45(6), 162-170.
  25. Yang, X. and Zhang, N. (2005), "The marginal decrease of lane capacity with the number of lanes on highway", Proceedings of the Eastern Asia Society for Transportation Studies, 5, 739-749.
  26. Zhou, J., Ruan, X., Shi, X. and Caprani, C.C. (2019), "An efficient approach for traffic load modelling of long span bridges", Struct. Infrastruct. Eng., 1-13.
  27. Zhou, J., Shi, X., Caprani, C.C. and Ruan, X. (2018), "Multi-lane factor for bridge traffic load from extreme events of coincident lane load effects", Struct. Safety, 72, 17-29. https://doi.org/10.1016/j.strusafe.2017.12.002