Geomechanics and Engineering

  • 제17권5호
  • /
  • Pages.445-452
  • /
  • 2019
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Laboratory triaxial test behavior of xanthan gum biopolymer-treated sands

  • Lee, Sojeong (School of Engineering and Information Technology (SEIT), University of New South Wales (UNSW)) ;
  • Im, Jooyoung (Department of Civil Engineering, Korean Advanced Institute for Science and Technology) ;
  • Cho, Gye-Chun (Department of Civil Engineering, Korean Advanced Institute for Science and Technology) ;
  • Chang, Ilhan (School of Engineering and Information Technology (SEIT), University of New South Wales (UNSW))
  • 투고 : 2018.10.20
  • 심사 : 2019.02.11
  • 발행 : 2019.04.10
⟨ 이전 논문 다음 논문 ⟩

초록

Gel-type biopolymers have recently been introduced as environmentally friendly soil binders and have shown substantial strengthening effects in laboratory experimental programs. Although the strengthening effects of biopolymer-treated sands have been verified in previous direct shear tests and uniaxial compression tests, there has been no attempt to examine shear behavior under different confining stress conditions. This study therefore aimed to investigate the strengthening effects of biopolymer-treated sand using laboratory triaxial testing with a focus on confining pressures. Three representative confining pressure conditions (${\sigma}_3=50kPa$, 100 kPa, and 200 kPa) were tested with varying biopolymer contents ($m_{bp}/m_s$) of 0.5%, 1.0%, and 2.0%, respectively. Based on previous studies, it was assumed that biopolymer-treated sand is susceptible to hydraulic conditions, and therefore, the experiments were conducted in both a hydrated xanthan gum condition and a dehydrated xanthan gum condition. The results indicated that the shear resistance was substantially enhanced and there was a demonstrable increase in cohesion as well as the friction angle when the biopolymer film matrix was comprehensively developed. Accordingly, it can be concluded that the feasibility of the biopolymer treatment will remain valid under the confining pressure conditions used in this study because the resisting force of the biopolymer-treated soil was higher than that in the untreated condition, regardless of the confining pressure.

키워드

과제정보

연구 과제 주관 기관 : Ministry of Land, Infrastructure, and Transport (MOLIT)

참고문헌

  1. Al Qabany, A. and Soga, K. (2013), "Effect of chemical treatment used in MICP on engineering properties of cemented soils", Geotechnique, 63(4), 331. https://doi.org/10.1680/geot.SIP13.P.022
  2. ASTM (2011), D7181-11: Method for Consolidated Drained Triaxial Compression Test for Soils, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  3. Cabalar, A., Wiszniewski, M. and Skutnik, Z. (2017), "Effects of xanthan gum biopolymer on the permeability, odometer, unconfined compressive and triaxial shear behavior of a sand", Soil Mech. Found. Eng., 54(5), 356-361. https://doi.org/10.1007/s11204-017-9481-1
  4. Chang, I. and Cho, G.C. (2012), "Strengthening of Korean residual soil with ${\beta}$-1,3/1,6-glucan biopolymer", Construct. Build. Mater., 30, 30-35. https://doi.org/10.1016/j.conbuildmat.2011.11.030
  5. Chang, I. and Cho, G.C. (2014), "Geotechnical behavior of a beta-1,3/1,6-glucan biopolymer-treated residual soil", Geomech. Eng., 7(6), 633-647. https://doi.org/10.12989/gae.2014.7.6.633
  6. Chang, I. and Cho, G.C. (2018), "Shear strength behavior and parameters of microbial gellan gum-treated soils: From sand to clay", Acta Geotechnica, 1-15.
  7. Chang, I., Im, J. and Cho, G.C. (2016), "Geotechnical engineering behaviors of gellan gum biopolymer treated sand", Can. Geotech. J., 53(10), 1658-1670. https://doi.org/10.1139/cgj-2015-0475
  8. Chang, I., Im, J. and Cho, G.C. (2016), "Introduction of microbial biopolymers in soil treatment for future environmentallyfriendly and sustainable geotechnical engineering", Sustainability, 8(3), 251. https://doi.org/10.3390/su8030251
  9. Chang, I., Im, J., Lee, S.W. and Cho, G.C. (2017), "Strength durability of gellan gum biopolymer-treated Korean sand with cyclic wetting and drying", Construct. Build. Mater., 143, 210-221. https://doi.org/10.1016/j.conbuildmat.2017.02.061
  10. Chang, I., Im, J., Prasidhi, A.K. and Cho, G.C. (2015), "Effects of Xanthan gum biopolymer on soil strengthening", Construct. Build. Mater., 74, 65-72. https://doi.org/10.1016/j.conbuildmat.2014.10.026
  11. Chang, I., Jeon, M. and Cho, G.C. (2015), "Application of microbial biopolymers as an alternative construction binder for earth buildings in underdeveloped countries", Int. J. Polymer Sci.
  12. Chang, I., Prasidhi, A.K., Im, J. and Cho, G.C. (2015), "Soil strengthening using thermo-gelation biopolymers", Construct. Build. Mater., 77, 430-438. https://doi.org/10.1016/j.conbuildmat.2014.12.116
  13. Chang, I., Prasidhi, A.K., Im, J., Shin, H.D. and Cho, G.C. (2015), "Soil treatment using microbial biopolymers for antidesertification purposes", Geoderma. 253-254, 39-47. https://doi.org/10.1016/j.geoderma.2015.04.006
  14. Chen, R., Ramey, D., Weiland, E., Lee, I. and Zhang, L. (2016), "Experimental investigation on biopolymer strengthening of mine tailings", J. Geotech. Geoenviron. Eng., 142(12), 06016017. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001568
  15. Chen, R., Zhang, L. and Budhu, M. (2013), "Biopolymer stabilization of mine tailings", J. Geotech. Geoenviron. Eng., 139(10), 1802-1807. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000902
  16. Chu, J., Leroueil, S. and Leong, W. (2003), "Unstable behaviour of sand and its implication for slope instability", Can. Geotech. J., 40(5), 873-885. https://doi.org/10.1139/t03-039
  17. Fatehi, H., Abtahi, S.M., Hashemolhosseini, H. and Hejazi, S.M. (2018), "A novel study on using protein based biopolymers in soil strengthening", Construct. Build. Mater., 167, 813-821. https://doi.org/10.1016/j.conbuildmat.2018.02.028
  18. Garcia-Ochoa, F., Santos, V.E., Casas, J.A. and Gomez, E. (2000), "Xanthan gum: Production, recovery, and properties", Biotechnol. Adv., 18(7), 549-579. https://doi.org/10.1016/S0734-9750(00)00050-1
  19. Hataf, N., Ghadir, P. and Ranjbar, N. (2018), "Investigation of soil stabilization using chitosan biopolymer", J. Clean. Prod., 170 1493-1500. https://doi.org/10.1016/j.jclepro.2017.09.256
  20. Horpibulsuk, S., Miura, N. and Bergado, D.T. (2004), "Undrained shear behavior of cement admixed clay at high water content", J. Geotech. Geoenviron. Eng., 130(10), 1096-1105. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:10(1096)
  21. Horpibulsuk, S., Phetchuay, C. and Chinkulkijniwat, A. (2011), "Soil stabilization by calcium carbide residue and fly ash", J. Mater. Civ. Eng., 24(2), 184-193. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000370
  22. Im, J., Tran, A.T.P., Chang, I. and Cho, G.C. (2017), "Dynamic properties of gel-type biopolymer-treated sands evaluated by Resonant Column (RC) tests", Geomech. Eng., 12(5), 815-830. https://doi.org/10.12989/gae.2017.12.5.815
  23. Kamon, M. and Nontananandh, S. (1991), "Combining industrial wastes with lime for soil stabilization", J. Geotech. Eng., 117(1), 1-17. https://doi.org/10.1061/(ASCE)0733-9410(1991)117:1(1)
  24. Kaniraj, S.R. and Havanagi, V.G. (2001), "Behavior of cementstabilized fiber-reinforced fly ash-soil mixtures", J. Geotech. Geoenviron. Eng., 127(7), 574-584. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:7(574)
  25. Kavazanjian, E., Iglesias, E. and Karatas, I. (2009), Biopolymer Soil Stabilization for Wind Erosion Control, IOS Press, Alexandria, Egypt.
  26. Khatami, H. and O'Kelly, B. (2012), "Improving mechanical properties of sand using biopolymers", J. Geotech. Geoenviron. Eng., 139(8), 1402-1406. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000861
  27. Kulshreshtha, Y., Schlangen, E., Jonkers, H., Vardon, P. and Van Paassen, L. (2017), "CoRncrete: A corn starch based building material", Construct. Build. Mater., 154, 411-423. https://doi.org/10.1016/j.conbuildmat.2017.07.184
  28. Kumbhojkar, A. (1993), "Numerical evaluation of Terzaghi's N $\gamma$", J. Geotech. Eng., 119(3), 598-607. https://doi.org/10.1061/(ASCE)0733-9410(1993)119:3(598)
  29. Kwon, Y.M., Im, J., Chang, I. and Cho, G.C. (2017), "$\varepsilon$-polylysine biopolymer for coagulation of clay suspensions", Geomech. Eng., 12(5), 753-770. https://doi.org/10.12989/gae.2017.12.5.753
  30. Larson, S., Ballard, J., Griggs, C., Newman, J.K. and Nestler, C. (2010), "An innovative non-ptroleum Rhizobium Tropici biopolymer salt for soil stabilization", Proceedings of the ASME 2010 International Mechanical Engineering Congress and Exposition, Vancouver, Canada, November.
  31. Latifi, N., Horpibulsuk, S., Meehan, C.L., Abd Majid, M.Z., Tahir, M.M. and Mohamad, E.T. (2016), "Improvement of problematic soils with biopolymer-an environmentally friendly soil stabilizer", J. Mater. Civ. Eng., 29(2), 04016204. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001706
  32. Lee, S., Chang, I., Chung, M.K., Kim, Y. and Kee, J. (2017), "Geotechnical shear behavior of xanthan gum biopolymer treated sand from direct shear testing", Geomech. Eng., 12(5), 831-847. https://doi.org/10.12989/gae.2017.12.5.831
  33. Lo, S., Rahman, M.M. and Bobei, D. (2010), "Limited flow characteristics of sand with fines under cyclic loading", Geomech. Geoeng., 5(1), 15-25. https://doi.org/10.1080/17486020903452709
  34. Mortensen, B. and DeJong, J. (2011), "Strength and stiffness of MICP treated sand subjected to various stress paths", Proceedings of the Geo-Frontiers 2011: Advances in Geotechnical Engineering, Dallas, Texas, U.S.A., March.
  35. Ngowi, A.B. (1997), "Improving the traditional earth construction: A case study of Botswana", Construct. Build. Mater., 11(1), 1-7. https://doi.org/10.1016/S0950-0618(97)00006-8
  36. Orts, W.J., Sojka, R.E., Glenn, G.M. and Gross, R.A. (2001), Biopolymer Additives for the Reduction of Soil Erosion Losses During Irrigation, ACS Publications.
  37. Prusinski, J. and Bhattacharja, S. (1999), "Effectiveness of Portland cement and lime in stabilizing clay soils", Transport. Res. Rec. J. Transport. Res. Board., 1652, 215-227. https://doi.org/10.3141/1652-28
  38. Rashid, A.S.A., Latifi, N., Meehan, C.L. and Manahiloh, K.N. (2017), "Sustainable improvement of tropical residual soil using an environmentally friendly additive", Geotech. Geol. Eng., 35(6), 2613-2623. https://doi.org/10.1007/s10706-017-0265-1
  39. Sherwood, P. (1993), Soil Stabilization with Cement and Lime.
  40. Terzaghi, K. (1943), Theoretical Soil Mechanics, John Wiley, New York, U.S.A.

피인용 문헌

  1. A Review of the Application of Biopolymers on Geotechnical Engineering and the Strengthening Mechanisms between Typical Biopolymers and Soils vol.2020, 2019, https://doi.org/10.1155/2020/1465709
  2. Triaxial test behaviour of silty sands treated with agar biopolymer vol.15, pp.4, 2019, https://doi.org/10.1080/19386362.2019.1679441
  3. Interfacial Shearing Behavior along Xanthan Gum Biopolymer-Treated Sand and Solid Interfaces and Its Meaning in Geotechnical Engineering Aspects vol.11, pp.1, 2019, https://doi.org/10.3390/app11010139
  4. Improving the Mechanical Properties of Red Clay Using Xanthan Gum Biopolymer vol.2021, 2019, https://doi.org/10.1155/2021/1535772
  5. Strength, Hydraulic, and Microstructural Characteristics of Expansive Soils Incorporating Marble Dust and Rice Husk Ash vol.2021, 2019, https://doi.org/10.1155/2021/9918757
  6. Strength and Mechanism of Carbonated Solidified Clay with Steel Slag Curing Agent vol.25, pp.3, 2021, https://doi.org/10.1007/s12205-020-0817-4
  7. Evaluation of Injection capabilities of a biopolymer-based grout material vol.25, pp.1, 2019, https://doi.org/10.12989/gae.2021.25.1.031
  8. Surface erosion behavior of biopolymer-treated river sand vol.25, pp.1, 2019, https://doi.org/10.12989/gae.2021.25.1.049
  9. Experimental investigation on the shear strength and deformation behaviour of xanthan gum and guar gum treated clayey sand vol.26, pp.2, 2019, https://doi.org/10.12989/gae.2021.26.2.101
  10. Enzyme induced carbonate precipitation for soil internal erosion control under water seepage vol.26, pp.3, 2019, https://doi.org/10.12989/gae.2021.26.3.289
  11. Experimental Study on Endurance Performance of Lime and Cement-Treated Cohesive Soil vol.25, pp.9, 2021, https://doi.org/10.1007/s12205-021-2154-7
  12. Seismic earth pressure on embankment gravity retaining wall with nonuniform slope vol.26, pp.5, 2021, https://doi.org/10.12989/gae.2021.26.5.415
  13. Triaxial Shear Behavior of Basalt Fiber-Reinforced Loess Based on Digital Image Technology vol.25, pp.10, 2021, https://doi.org/10.1007/s12205-021-2034-1
  14. Site application of biopolymer-based soil treatment (BPST) for slope surface protection: in-situ wet-spraying method and strengthening effect verification vol.307, 2021, https://doi.org/10.1016/j.conbuildmat.2021.124983