Coupled systems mechanics

  • 제8권2호
  • /
  • Pages.185-197
  • /
  • 2019
  • /
  • 2234-2184(pISSN)
  • /
  • 2234-2192(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Numerical analysis of the mechanical behavior of welded I beam-to-RHS column connections

  • Rosa, Rosicley J.R. (Department of Civil Engineering, Pontifical Catholic University of Goias) ;
  • Neto, Juliano G.R. (Department of Civil Engineering, Pontifical Catholic University of Goias)
  • 투고 : 2018.09.26
  • 심사 : 2019.03.11
  • 발행 : 2019.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

Considering the increasing use of tubular profiles in civil construction, this paper highlights the study on the behavior of welded connections between square hollow section column and I-beam, with emphasis on the assessment of the joint stiffness. Firstly, a theoretical analysis of the welded joints has been done focusing on prescriptions of the technical literature for the types of geometries mentioned. Then, a numerical analysis of the proposed joints were performed by the finite element method (FEM) with the software ANSYS 16.0. In this study, two models were evaluated for different parameters, such as the thickness of the cross section of the column and the sizes of cross section of the beams. The first model describes a connection in which one beam is connected to the column in a unique bending plane, while the second model describes a connection of two beams to the column in two bending planes. From the numerical results, the bending moment-rotation ($M-{\varphi}$) curve was plotted in order to determine the resistant bending moment and classify each connection according to its rotational capacity. Furthermore, an equation was established with the aim of estimating the rotational stiffness of welded I beam-to-RHS column connections, which can be used during the structure design. The results show that most of the connections are semi-rigid, highlighting the importance of considering the stiffness of the connections in the structure design.

키워드

참고문헌

  1. Ansys, Inc (2015), Theory Reference (Version 16.0).
  2. Diaz, C., Marti, P., Victoria, M. and Querin, O.M. (2011), "Review on the modelling of joint behaviour in steel frames", J. Constr. Steel Res., 67(5), 741-758. https://doi.org/10.1016/j.jcsr.2010.12.014
  3. EN 1993-1-8 (2005), Eurocode 3: Design of Steel Structures-Part 1-8: Design of Joints, European Committee for Standardization, Brussels, Belgium.
  4. Eslami, M. and Namba, H. (2016a) "Mechanism of elasto-plastic behavior of composite beam connected to RHS column", Int. J. Steel Struct., 16(3), 913-933. https://doi.org/10.1007/s13296-015-0068-2
  5. Eslami, M. and Namba, H. (2016b) "Elasto-plastic behavior of composite beam connected to RHS column, experimental test results", Int. J. Steel Struct., 16(3), 901-912. https://doi.org/10.1007/s13296-015-0067-3
  6. Faridmehr, I., Tahir, M.M. and Lahmer, T. (2016), "Classification system for semi-rigid beam-to-column connections", Lat. Am. J. Sol. Struct., 13(11), 2152-2175. https://doi.org/10.1590/1679-78252595
  7. Freitas, P.C.B. (2009), "Analise numerica de ligacoes metalicas viga-coluna com coluna tubular circular", M.Sc. Dissertation, University of Sao Paulo, Sao Carlos, Brazil.
  8. Guerra, M.J.L., Reis, S.L.F., Nunes, G.V. and Sarmanho, A.M. (2013), "Analise da rigidez de ligacoes metalicas soldadas entre pilar de secao RHS e viga de secao I", Proceedings of the 34th Ibero-Latin American Congress on Computational Methods in Engineering, Pirenopolis, Brazil, November.
  9. Imamovic, I., Ibrahimbegovic, A. and Mesic, E. (2018), "Coupled testing-modeling approach to ultimate state computation of steel structure with connections for statics dynamics", Coupled Syst. Mech., 7(5), 555-581. https://doi.org/10.12989/csm.2018.7.5.555
  10. Imamovic, I., Ibrahimbegovic, A., Knopf-Lenoir, C. and Mesic, E. (2015), "Plasticity-damage model parameters identification for structural connections", Coupled Syst. Mech., 4(4), 337-364. https://doi.org/10.12989/csm.2015.4.4.337
  11. Lozano, M., Serrano, M.A., Lopez-Colina, C., Gayarre, F.L. and Suarez, J. (2018), "The influence of the heat-affected zone mechanical properties on the behaviour of the welding in transverse plate-to-tube joints", Mater., 11(2), 266. https://doi.org/10.3390/ma11020266
  12. Lu, L.H. (1997), "The static strength of I-beam to rectangular hollow section column connections", Ph.D. Dissertation, Delft University, the Netherlands.
  13. Machado, R.B. (2013), "Analise numerica e experimental de ligacoes soldadas na direcao de menor inercia do pilar", Ph.D. Dissertation, Federal University of Ouro Preto, Ouro Preto, Brazil.
  14. Maggi, Y.I. (2004), "Analise do comportamento estrutural de ligacoes parafusadas viga-pilar com chapa de topo estendida", Ph.D. Dissertation, University of Sao Paulo, Sao Carlos, Brazil.
  15. Matos, R.M.M.P., Costa-Neves, L.F., Lima, L.R.O., Vellasco, P.C.G.S. and Silva, J.G.S. (2015), "Resistance and elastic stiffness of RHS "T" joints: Part I-axial brace loading", Lat. Am. J. Sol. Struct., 12(11), 2159-2179. https://doi.org/10.1590/1679-78251790
  16. Nunes, T.C. (2012), "Analise de ligacoes metalicas soldadas entre pilar de secao RHS e viga de secao I", M.Sc. Dissertation, Federal University of Ouro Preto, Ouro Preto, Brazil.
  17. Rocha, B.S. and Neto, J.G.R. (2016), Analise de Ligacoes Soldadas entre Vigas de Secao I e Pilares em Perfis Tubulares, Revista Interdisciplinar de Pesquisa em Engenharia.
  18. Serrano-Lopez, M.A., Lopez-Colina, C., Gonzalez, J. and Lopez-Gayarre, F. (2016), "A simplified FE simulation of welded I beam-to-RHS column joints", Int. J. Steel Struct., 16(4), 1095-1105. https://doi.org/10.1007/s13296-016-0028-5
  19. Wardenier, J., Packer, J.A., Zhao, X.L. and Van der Vegte, G.J. (2010), Hollow Sections in Structural Applications, 2nd Edition, CIDECT, Geneva, Switzerland.
  20. Wu, J. and Feng, Y.T. (2013), "Finite element simulation of new RHS column-to-I beam connections for avoiding tensile fracture", J. Constr. Steel Res., 86, 42-53. https://doi.org/10.1016/j.jcsr.2013.03.012