Advances in concrete construction

  • 제7권2호
  • /
  • Pages.65-74
  • /
  • 2019
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

The role of slenderness on the seismic behavior of ground-supported cylindrical silos

  • 투고 : 2018.07.20
  • 심사 : 2019.01.15
  • 발행 : 2019.04.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper reports on the results of a parametric study, which examines the effects of varying aspect ratios on the dynamic response of cylindrical silos directly supported on the ground under earthquake loading. Previous research has shown that numerical models can provide considerably realistic simulations when it comes to the behavior of silos by using correct boundary conditions, appropriate element types and material models. To this end, a three dimensional numerical model, taking into account the bulk material-silo wall interaction, was produced by the ANSYS commercial program, which is in turn based on the finite element method. The results obtained from the numerical analysis are discussed comparatively in terms of dynamic material pressure, horizontal displacement, equivalent base shear force and equivalent bending moment responses for considered aspect ratios. The effects experienced because of the slenderness of the silo in regards to the seismic response were evaluated along with the effectiveness of the classification system proposed by Eurocode in evaluating the loads on the vertical walls. Results clearly show that slenderness directly affects the seismic response of such structures especially in terms of behavior and the magnitude of the responses. Furthermore the aspect ratio value of 2.0, given as a behavioral changing limit in the technical literature, can be used as a valid limit for seismic behavior.

키워드

참고문헌

  1. Ansys 12, ANSYS Inc., Canonsburg, PA.
  2. Ayuga, F., Guaita, M. and Aguado, P. (2001), "Static and dynamic silo loads using finite element models'', J. Agric. Eng. Res., 78(3), 299-308. https://doi.org/10.1006/jaer.2000.0640
  3. Bechtoula, H. and Ousalem, H. (2005), "The 21 May 2003 Zemmouri Algeria earthquake damages and disaster responses", J. Adv. Concrete Technol., 3(1), 161-174. https://doi.org/10.3151/jact.3.161
  4. Braun, A. and Eibl, J. (1995), "Silo pressures under earthquake loading'', Proceedings of X International Conference on Reinforced and Post-Tensioned Concrete Silo and Tanks, Cracow, Poland.
  5. Briassoulis, D. (2000), "Finite element analysis of a cylindrical silo shell under unsymmetrical pressure distributions", Comput. Struct., 78, 271-281. https://doi.org/10.1016/S0045-7949(00)00069-9
  6. Dogangun, A., Karaca, Z., Durmus, A. and Sezen, H. (2009), "Cause of damage and failures in silo structures", J. Perform. Constr. Facil., 23(2), 65-71. https://doi.org/10.1061/(ASCE)0887-3828(2009)23:2(65)
  7. Durmus, A. (2013), "Investigation of seismic behavior of reinforced concrete cylindrical silos considering bulk materialstructure-soil interaction'', Ph.D Dissertation, Karadeniz Technical University, Trabzon, Turkey. (in Turkish)
  8. Durmus, A. and Livaoglu, R. (2015), "A simplified 3 D.O.F. model of A FEM model for seismic analysis of a silo containing elastic material accounting for soil-structure interaction", Soil Dyn. Earthq. Eng., 77, 1-14. https://doi.org/10.1016/j.soildyn.2015.04.015
  9. EN 1991-4 (2006), Basis of Design and Actions on Structures - Part 4: Actions in Silos and Tanks, European Committee for Standardization.
  10. EN 1998-4 (2006), Design of Structures for Earthquake Resistance - Part 4: Silos, Tanks, and Pipelines, European Committee for Standardization.
  11. Fierro, E.A., Miranda, E. and Perry, C.L. (2011), "Behavior of nonstructural components in recent earthquakes", AEI 2011: Building Integration Solutions, Proceedings of the 2011 Architectural Engineering National Conference, Oakland, California, USA.
  12. Fischer, W. (1966), Silos and Bunkers in Stahlbeton, Veb Verlag Fur Bauwesen, Berlin, Germany.
  13. Hardin, B.O., Hardin, K.O., Feng, F. and Ross, I.J. (1999), "Damping capacity of bulk wheat", Tran. ASAE, 42(5), 1447-1454. https://doi.org/10.13031/2013.13308
  14. Harris, E.C. and von Nad, J.D. (1985), "Experimental determination of effective weight of stored material for use in seismic design of silos'', ACI J., 82(6), 828-833.
  15. Holler, S. and Meskouris, K. (2006), "Granular material silos under dynamic excitation: numerical simulation and experimental validation'', J. Struct. Eng., 132(10), 1573-1579. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:10(1573)
  16. Iwatsubo, T. (1998), "Damage to industrial equipment in the 1995 Hyogoken-Nanbu earthquake", Nucl. Eng. Des., 181(1), 41-53. https://doi.org/10.1016/S0029-5493(97)00333-6
  17. Kozicki, J. and Tejchman, J. (2005), "Application of a cellular automaton to simulations of granular flow in silos'', Granular Matter, 7(1), 45-54. https://doi.org/10.1007/s10035-004-0190-x
  18. Kusinska, E. (2000), "Effect of triticale moisture content and slenderness ratio of a silo on pressure distribution'', Int. Agrophys., 14, 191-195.
  19. Livaoglu, R. and Durmus A. (2016), "A simplified approximation for seismic analysis of silo- bulk material system", Bull. Earthq. Eng., 14, 863-887. https://doi.org/10.1007/s10518-015-9851-x
  20. Livaoglu, R. and Durmus, A. (2015), "Investigation of wall flexibility effects on seismic behavior of cylindrical silos", Struct. Eng. Mech., 53(1), 159-172. https://doi.org/10.12989/sem.2015.53.1.159
  21. Mori, S.I., Numata, A. and Guan, B. (2000), "Damage to a pile foundation due to liquefied ground motion", Proceedings of the 12th WCEE, Auckland, New Zealand.
  22. Nielsen, J., Rotter, J.M. and Sorensen, J.D. (2012), "A note on load combinations for silos'', Proceedings of International Conference on Agricultural Engineering, Valencia, Spain.
  23. Rotter, J.M. and Hull, T.S. (1989), "Wall loads in squat steel silos during earthquakes'', Eng. Struct., 11(3), 139-147. https://doi.org/10.1016/0141-0296(89)90002-3
  24. Sadowski, A.J. and Rotter, J.M. (2011a), "Steel silos with different aspect ratios: I-Behaviour under concentric discharge", J. Constr. Steel Res., 67(10), 1537-1544. https://doi.org/10.1016/j.jcsr.2011.03.028
  25. Sadowski, A.J. and Rotter, J.M. (2011b), "Steel silos with different aspect ratios: II-Behaviour under eccentric discharge'', J. Constr. Steel Res., 67(10), 1545-1553. https://doi.org/10.1016/j.jcsr.2011.03.027
  26. Safarian, S.S. and Harris, E.C. (1974), Silos and Bunkers, Handbook of Concrete Engineering, Van Nostrand Reinhold Co. Inc., New York.
  27. Sasaki, Y. and Yoshimura, J. (1992), "Dynamic discrete modeling and computer simulation of seismic response of concrete stave silos with structural discontinuity'', Proceedings of the 10th World Conference on Earthquake Engineering, Madrid, Spain, 5065-5070.
  28. Sasaki, Y., Yoshimura, J. and Dohkoshi, J. (1986), "Experimental studies of the earthquake response characteristics of concrete stave silos'', J. Soc. Agricult. Struct., 17(2), 24-33.
  29. Shimamoto, A., Kodama, M. and Yamamura, M. (1982), "Shaking table tests of cylindrical coal storage silo models'', Proceedings of the 6th Japan Earthquake Engineering Symposium, Tokyo, Japan.
  30. Tatko, R. and Kobielak, S. (2008), "Horizontal bulk material pressure in silo subjected to impulsive load'', Shock Vib., 15, 543-550. https://doi.org/10.1155/2008/289317
  31. Trahair, N.S., Abel, A., Ansourian, P., Irvine, H.M. and Rotter, J.M. (1983), Structural Design of Steel Bins for Bulk Solids, Australian Institute of Steel Construction, Sydney.
  32. Villalobos, F., Ovando, E., Mendoza, M. and Orostegui, P. (2011), "Damages observed in the 2010 Concepcion earthquake related to soil phenomena", Proceedings of the 5th International Conference on Earthquake Geotechnical Engineering, Santiago, Chile.
  33. Whitman, Z.R., Wilson, T.M., Seville, E., Vargo, J., Stevenson, J.R., Kachali, H. and Cole, J. (2013), "Rural organizational impacts, mitigation strategies, and resilience to the 2010 Darfield earthquake, New Zealand", Nat. Hazard., 69, 1849-1875. https://doi.org/10.1007/s11069-013-0782-z

피인용 문헌

  1. Application of Kelvin's theory for structural assessment of FG rotating cylindrical shell: Vibration control vol.10, pp.6, 2019, https://doi.org/10.12989/acc.2020.10.6.499
  2. Confinement effectiveness of Timoshenko and Euler Bernoulli theories on buckling of microfilaments vol.11, pp.1, 2021, https://doi.org/10.12989/acc.2021.11.1.081
  3. Thermal stress effects on microtubules based on orthotropic model: Vibrational analysis vol.11, pp.3, 2019, https://doi.org/10.12989/acc.2021.11.3.255
  4. Mechanics of anisotropic cardiac muscles embedded in viscoelastic medium vol.12, pp.1, 2019, https://doi.org/10.12989/acc.2021.12.1.057
  5. An innovative system for novel vibration of rotating FG shell with combination of fraction laws vol.12, pp.2, 2019, https://doi.org/10.12989/acc.2021.12.2.157