Fig. 1. Slab location and field foreground
Fig. 2. Slab drawing and casting section
Fig. 3. Wall location and field foreground
Fig. 4. Wall drawing and casting section
Fig. 5. Micro-hydration and cumulative micro-hydration heat of mixed binder
Fig. 6. Losition of slab and temperature measurement area
Fig. 7. Losition of wall and temperature measurement area
Fig. 8. Temperature gauge installation foreground
Fig. 9. Slab modeling
Fig. 10. wall modeling
Fig. 11. Temperature history of slab
Fig. 12. Temperature history of wall
Fig. 13. Temperature distribution of construction phase of slab
Fig. 14. Analysis result and actual measurement result
Fig. 15. Analysis point of the slab
Fig. 16. Result of hydration heat analysis of slab
Fig. 17. Crack stability of slab
Fig. 18. Temperature distribution of construction phase of wall
Fig. 19. Analysis result and actual measurement result
Fig. 20. Analysis point of the wall
Fig. 21. Result of hydration heat analysis of wall
Fig. 22. Crack stability of wall
Table 1. mass concrete mix according to applied member
Table 2. Chemical composition of mixed binder
Table 3. Cumulative micro-hydration heat of mixed binder
Table 4. Physical properties of aggregate
Table 5. Physical properties of chemical admixtures
Table 6. Hydration heat analysis condition
Table 7. Thermal and mechanical properties
Table 8. Evaluation result of basic quality
Table 9. Measurement result of hydration heat
Table 10. Results of temperature history analysis of slab
Table 11. Crack index of slab
Table 12. Results of temperature history analysis of wall
Table 13. Crack index of wall
References
- Hwang, C.L., Shen, D.H. (1991). The effects of blast-furnace slag and fly ash on the hydration of portland cement, Cement and Concrete Research, 21, 1137-1147. https://doi.org/10.1016/0008-8846(91)90074-R
- EBN News. (2017). http://www.ebn.co.kr/
- Lee, J.N. (2017). A Study on the Development of Ternary Blended Mass Concrete for Crack Control of Large Underground Structures, Ph.D Thesis, Semyung University, Korea [in Korean].
- Espenson, J.H. (1996). Chemical Kinetics and Reaction Mechanisms, Second Edition, Mc Graw -Hill, Inc., 1-52.
- Taplin, J.H. (1959). A method for fllowing the hydration reaction in portland cement paste, Australian Journal of Applied Science, 10, 329-345.
- Ministry of Land, Infrastructure and Transport. (2016). http://www.molit.go.kr/
- Mehta, P.K., Monteiro, J.M. (2004). Concrete : Structure, Properties, and Materials, Third Edition, Prentice-Hall, Inc., 209-260.
- Mehta, P.K., Monteiro, J.M. (1993). Concrete : Structure, Properties, and Materials, Second Edition, Prentice-Hall, Inc., 481-493.
- Dhir, R.K. (1986). Pulerized-Fuel Ash, Cement Replacement Materials, Surrey University Press, 197-255.
- Nan, S., Hsu, K.C., Chai, H.W. (2001). A simple mix design method for self-compacting concrete, Cement and Concrete Research, 31, 1799-1807. https://doi.org/10.1016/S0008-8846(01)00566-X
- Statistics Korea, (2017). http://kostat.go.kr/
- Cook, W.D., Miao, B., Aitcin, P.C., Mitchell, D. (1992). Thermal stress in large high-strength concrete columns, ACI Materials Journal, 89(1), 61-68.
- Zhang, Y.S., Sun, W., Liu, S. (2002). Study on the hydration heat of binder paste in high-performance concrete, Cement and Concrete Research, 32(9), 1483-1488. https://doi.org/10.1016/S0008-8846(02)00810-4
- Choi, Y.W., Kim, Y.J., Shin, H.C., Moon, H.Y. (2006). An experimental research on the fluidity and mechanical properties of highstrength lightweight self-compacting concrete, Cement and Concrete Research, 36(9), 1595-1602. https://doi.org/10.1016/j.cemconres.2004.11.003