Smart Structures and Systems

  • 제23권3호
  • /
  • Pages.295-306
  • /
  • 2019
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Investigation of the SHM-oriented model and dynamic characteristics of a super-tall building

  • Xiong, Hai-Bei (Department of Disaster Mitigation for Structures, Tongji University) ;
  • Cao, Ji-Xing (Department of Disaster Mitigation for Structures, Tongji University) ;
  • Zhang, Feng-Liang (School of Civil and Environmental Engineering, Harbin Institute of Technology (HIT)) ;
  • Ou, Xiang (East China Region of Tahoe (Group) Co. Ltd.) ;
  • Chen, Chen-Jie (Shanghai Architectural Design & Research (Co., Ltd.))
  • 투고 : 2018.05.27
  • 심사 : 2018.11.14
  • 발행 : 2019.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Shanghai Tower is a 632-meter super high-rise building located in an area with wind and active earthquake. A sophisticated structural health monitoring (SHM) system consisting of more than 400 sensors has been built to carry out a long-term monitoring for its operational safety. In this paper, a reduced-order model including 31 elements was generated from a full model of this super tall building. An iterative regularized matrix method was proposed to tune the system parameters, making the dynamic characteristic of the reduced-order model be consistent with those in the full model. The updating reduced-order model can be regarded as a benchmark model for further analysis. A long-term monitoring for structural dynamic characteristics of Shanghai Tower under different construction stages was also investigated. The identified results, including natural frequency and damping ratio, were discussed. Based on the data collected from the SHM system, the dynamic characteristics of the whole structure was investigated. Compared with the result of the finite element model, a good agreement can be observed. The result provides a valuable reference for examining the evolution of future dynamic characteristics of this super tall building.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Central Universities

참고문헌

  1. Abdelrazaq, A., Amp, H. and Camp, S. (2012), "Validating the structural behavior and response of Burj Khalifa: Full scale structural health monitoring programs", Build. Struct., 44(5), 87-97.
  2. Amabili, M., Sarkar, A. and Paidoussis, M.P. (2003), "Reducedorder models for nonlinear vibrations of cylindrical shells via the proper orthogonal decomposition method", Fluid. Struct., 18(2), 227-250. https://doi.org/10.1016/j.jfluidstructs.2003.06.002
  3. Aquino, R. E. and Tamura, Y. (2011), "Damping based on EPP spring models of stick-slip surfaces", Proceedings of the International Conference on Wind Engineering.
  4. Au, S.K. (2017), Operational Modal Analysis Modeling, Bayesian Inference, Uncertainty Laws. Springer.
  5. Au, S.K. and Zhang, F.L. (2016), "Fundamental two-stage formulation for Bayesian system identification, Part I: general theory", Mech. Syst. Signal Pr., 66-67, 31-42. https://doi.org/10.1016/j.ymssp.2015.04.025
  6. Au, S.K., Zhang, F.L. and To, P. (2012), "Field observations on modal properties of two tall buildings under strong wind". J. Wind Eng. Ind. Aerod., 101(101), 12-23. https://doi.org/10.1016/j.jweia.2011.12.002
  7. Brincker, R., Zhang, L. and Andersen, P. (2001), "Modal identification of output-only systems using frequency domaindecomposition", Smart Mater. Struct., 10(3), 44
  8. Cao, L. and Li, C. (2019), "Tuned tandem mass dampers-inerters with broadband high effectiveness for structures under white noise base excitations", Struct. Control Health Monit., e2319. https://doi.org/ 10.1002/stc.2319
  9. Chen, W.H., Lu, Z.R., Lin, W., Chen, S.H., Ni, Y.Q., Xia, Y. and Liao, W.Y. (2011), "Theoretical and experimental modal analysis of the Guangzhou New TV Tower", Eng Struct., 33(12), 3628-3646. https://doi.org/10.1016/j.engstruct.2011.07.028
  10. Clough, R.W. and Penzien, J. (1995), Dynamics of Structures, Computers & Structures Inc.
  11. Craig, R.R., and Kurdila, A.J. (2006), Fundamentals of structural dynamics, John Wiley & Sons.
  12. Davenport, A.G. (1986), "Damping in tall buildings: Its variability and treatment in design", Building Motion in Wind, 42-57.
  13. Downs, B. (1980), "Accurate reduction of stiffness and mass matrices for vibration analysis and a rationale for selecting master degrees of freedom", Mech. Des-T Asme, 102(2), 412-416. https://doi.org/10.1115/1.3254760
  14. Flanigan, C.C. (1991), "Development of the Irs component dynamic reduction method for substructure analysis", Proceedings of the 32nd Structures, Structural Dynamics, and Materials Conference.
  15. Friswell, M.I., Mottershead, J.E. and Ahmadian, H. (2001), "Finite-element model updating using experimental test data: parametrization and regularization", Philos. T. Roy. Soc. A, 359(1778), 169-186. https://doi.org/10.1098/rsta.2000.0719
  16. Huang, M.J. (2006), "Utilization of strong-motion records for post-earthquake damage assessment of buildings", Proceedings of the international workshop on structural health monitoring and damage assessment.
  17. Hansen, P.H. (2001), "The L-curve and its use in the numerical treatment of inverse problems", invited chapter, in: P. Johnston (Ed.), Computational Inverse Problems in Electrocardiology, WIT Press, Southampton.
  18. GB50011-2010. (2010), Code for Seismic Design of Building, Ministry of Construction of the People's Republic of China, Beijing, China.
  19. Guo, Y.L., Kareem, A., Ni, Y.Q. and Liao, W.Y. (2012), "Performance evaluation of Canton Tower under winds based on full-scale data", J. Wind Eng. Ind. Aerod., 104, 116-128. https://doi.org/10.1016/j.jweia.2012.04.001
  20. Jain, S., Tiso, P., Rutzmoser, J.B. and Rixen, D.J. (2017), "A quadratic manifold for model order reduction of nonlinear structural dynamics", Comput. Struct., 188, 80-94. https://doi.org/10.1016/j.compstruc.2017.04.005
  21. Jeary, A.P. (1986), "Damping in tall buildings-a mechanism and a predictor", Earthq. Eng. Struct., 14(5), 733-750. https://doi.org/10.1002/eqe.4290140505
  22. Kerschen, G., Golinval, J.C., Vakakis, A.F. and Bergman, L.A. (2005), "The method of proper orthogonal decomposition for dynamical characterization and order reduction of mechanical systems: An overview", Nonlinear Dynam., 41(1-3), 147-169. https://doi.org/10.1007/s11071-005-2803-2
  23. Kijewski-Correa, T.L. and Kareem, A. (2003), "The Chicago monitoring project: a fusion of information technologies and advanced sensing for civil infrastructure". Struct. Health. Monit. Intell. Infrastr., 1(2), 1003-1010.
  24. Lagomarsino, S. (1993), "Forecast models for damping and vibration periods of buildings", J. Wind Eng. Ind. Aerod., 48(2-3), 221-239. https://doi.org/10.1016/0167-6105(93)90138-E
  25. Li, B. and Kiureghian, A.D. (2017), "Operational modal identification using variational Bayes", Mech. Syst. Signal Pr., 88, 377-398. https://doi.org/10.1016/j.ymssp.2016.11.007
  26. Ng, C.T. and Au, S.K. (2018), "Mode shape scaling and implications in modal identification with known input", Eng. Struct., 156, 411-416. https://doi.org/10.1016/j.engstruct.2017.11.017
  27. Ni, Y.C., Lu, X.L. and Lu, W.S. (2017), "Operational modal analysis of a high-rise multi-function building with dampers by a Bayesian approach", Mech. Syst. Signal Pr., 86, 286-307. https://doi.org/10.1016/j.ymssp.2016.10.009
  28. Ni, Y.C., Zhang, Q.W. and Liu, J.F. (2019), "Dynamic property evaluation of a long-span cable-stayed bridge (Sutong Bridge) by a Bayesian method", Int. J. Struct. Stability Dynam., 19(1), 1940010. https://doi.org/10.1142/S0219455419400108
  29. Ni, Y.C. and Zhang, F.L. (2016), "Bayesian operational modal analysis of a pedestrian bridge using a field test with multiple setups", Int. J. Struct. Stability Dynam., 16(8), 1550052. https://doi.org/10.1142/S0219455415500522
  30. Ni, Y.C. and Zhang, F.L.(2018), "Fast Bayesian approach for modal identification using forced vibration data considering the ambient effect", Mech. Syst. Signal Pr., 105, 113-128. https://doi.org/10.1016/j.ymssp.2017.11.007
  31. Ni, Y.C. and Zhang, F.L.(2019), "Fast Bayesian approach for modal identification from seismic response data", Comput. Struct., 212, 225-235. https://doi.org/10.1016/j.compstruc.2018.08.018
  32. Ni, Y.C., Zhang, F.L., Lam, H.F. and Au, S.K. (2016), "Fast Bayesian approach for modal identification using free vibration data, Part II-Posterior uncertainty and application", Mech. Syst. Signal Pr., 70, 221-244. https://doi.org/10.1016/j.ymssp.2015.06.009
  33. Ni, Y.Q., Xia, Y., Liao, W.Y. and Ko, J.M. (2009), "Technology innovation in developing the structural health monitoring system for Guangzhou New TV Tower", Struct. Control Health, 16(1), 73-98. https://doi.org/10.1002/stc.303
  34. Ni, Y.Q., Xia, Y., Lin, W., Chen, W.H. and Ko, J.M. (2012), "SHM benchmark for high-rise structures: a reduced-order finite element model and field measurement data", Smart Struct. Syst., 10(4-5), 411-426. https://doi.org/10.12989/sss.2012.10.4_5.411
  35. Osmancikli, G., Ucak, S., Turan, F.N., Turker, T. and Bayraktar, A. (2012), "Investigation of restoration effects on the dynamic characteristics of the Hagia Sophia bell-tower by ambient vibration test", Constr. Build. Mater., 29, 564-572. https://doi.org/10.1016/j.conbuildmat.2011.11.035
  36. Peeters, B. and Roeck, G.D. (1999), "Reference-based stochastic subspace identifitcation for output-only modal analysis", Mech. Syst. Signal Pr., 13(6), 855-878. https://doi.org/10.1006/mssp.1999.1249
  37. Papagiannopoulos, G.A. and Hatzigeorgiou, G.D. (2011), "On the use of the half-power bandwidth method to estimate damping in building structures", Soil Dyn. Earthq. Eng., 31(7), 1075-1079. https://doi.org/10.1016/j.soildyn.2011.02.007
  38. Pastor, M., Binda, M. and Harcarik, T. (2012), "Modal assurance criterion", Modell. Mech. Mechatron. Syst., 48, 543-548.
  39. Rahmani, M. and Todorovska, M.I. (2015), "Structural health monitoring of a 54-story steel-frame Building using a wave method and earthquake records", Earthq. Spectra., 31(1), 501-525. https://doi.org/10.1193/112912EQS339M
  40. Rezghi, M. and Hosseini, S.M. (2009), "A new variant of L-curve for Tikhonov regularization", Comput. Appl. Math., 231(2), 914-924. https://doi.org/10.1016/j.cam.2009.05.016
  41. Rutzmoser, J.B., Rixen, D.J., Tiso, P. and Jain, S. (2017), "Generalization of quadratic manifolds for reduced order modeling of nonlinear structural dynamics", Comput. Struct., 192, 196-209. https://doi.org/10.1016/j.compstruc.2017.06.003
  42. Satake, N., Suda, K., Arakawa, T., Sasaki, A. and Tamura, Y. (2003), "Damping Evaluation Using Full-Scale Data of Buildings in Japan", J. Struct. Eng., 129(4), 470-477. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:4(470)
  43. Smith, R.J. and Willford, M.R. (2007), "The damped outrigger concept for tall buildings", Struct. Des. Tall Spec., 16(4), 501-517. https://doi.org/10.1002/tal.413
  44. Su, J.Z., Xia, Y. and Chen, L. (2013), "Long-term structural performance monitoring system for the Shanghai Tower", J. Civil Struct. Health. Monit., 3(1), 49-61. https://doi.org/10.1007/s13349-012-0034-z
  45. Spence, S.M.J., Bernardini, E., Guo, Y., Kareem, A. and Gioffre, M. (2014a), "Natural frequency coalescing and amplitude dependent damping in the wind-excited response of tall buildings", Probabilist. Eng. Mech., 35(6), 108-117. https://doi.org/10.1016/j.probengmech.2013.09.002
  46. Spence, S.M.J. and Kareem, A. (2014b), "Tall buildings and damping: a concept-based data-driven model", J. Struct. Eng., 140(5),
  47. Wang, J. and Yang, Q.S. (2012), "Modified tikhonov regularization in model updating for damage identification", Struct. Eng. Mech., 44(5), 585-600. https://doi.org/10.12989/sem.2012.44.5.585
  48. Xiong, H.B., Cao, J.X. and Zhang, F.L. (2018), "Inclinometerbased method to monitor displacement of high-rise buildings", Struct. Monit. Maint., 5(1), 111-127. https://doi.org/10.12989/SMM.2018.5.1.111
  49. Yin, T., Jiang, Q.H. and Yuen, K.V. (2017), "Vibration-based damage detection for structural connections using incomplete modal data by Bayesian approach and model reduction technique", Eng. Struct., 132, 260-277. https://doi.org/10.1016/j.engstruct.2016.11.035
  50. Yi, J., Zhang, J.W. and Li, Q.S. (2013), "Dynamic characteristics and wind-induced responses of a super-tall building during typhoons", J. Wind Eng. Ind. Aerod., 121, 116-130. https://doi.org/10.1016/j.jweia.2013.08.006
  51. Yi, T.H., Li, H.N. and Gu, M. (2013), "Recent research and applications of GPS-based monitoring technology for high-rise structures", Struct. Control Health., 20(5), 649-670. https://doi.org/10.1002/stc.1501
  52. Zhang, F.L., Ni, Y.Q., Ni, Y.C. and Wang, Y.W. (2016a), "Operational modal analysis of Canton Tower by a fast frequency domain Bayesian method", Smart Struct. Syst., 17(2), 209-230. https://doi.org/10.12989/sss.2016.17.2.209
  53. Zhang, F.L., Xiong, H.B., Shi, W.X. and Ou, X. (2016b), "Structural health monitoring of Shanghai Tower during different stages using a Bayesian approach", Struct. Control Health., 23(11), 1366-1384. https://doi.org/10.1002/stc.1840
  54. Zhang, F.L., Ni, Y.C. and Lam, H.F. (2017). "Bayesian structural model updating using ambient vibration data collected by multiple setups", Struct. Control Health., 24(12), e2023. https://doi.org/10.1002/stc.2023
  55. Zhang, F.L., Ventura, C.E., Xiong, H.B., Lu, W.S., Pan, Y.X. and Cao, J.X. (2018), "Evaluation of the dynamic characteristics of a super tall building using data from ambient vibration and shake table tests by a Bayesian approach", Struct. Control Health., 25(2), e2121. https://doi.org/10.1002/stc.2121