DOI QR코드

DOI QR Code

Identification of moving train loads on railway bridge based on strain monitoring

  • Wang, Hao (Key Laboratory of C&PC Structures of Ministry of Education, Southeast University) ;
  • Zhu, Qingxin (Key Laboratory of C&PC Structures of Ministry of Education, Southeast University) ;
  • Li, Jian (Department of Civil, Environmental and Architectural Engineering, The University of Kansas) ;
  • Mao, Jianxiao (Key Laboratory of C&PC Structures of Ministry of Education, Southeast University) ;
  • Hu, Suoting (Railway Engineering Research Institute, China Academy of Railway Sciences) ;
  • Zhao, Xinxin (Railway Engineering Research Institute, China Academy of Railway Sciences)
  • 투고 : 2018.07.04
  • 심사 : 2019.01.17
  • 발행 : 2019.03.25

초록

Moving train load parameters, including train speed, axle spacing, gross train weight and axle weights, are identified based on strain-monitoring data. In this paper, according to influence line theory, the classic moving force identification method is enhanced to handle time-varying velocity of the train. First, the moments that the axles move through a set of fixed points are identified from a series of pulses extracted from the second derivative of the structural strain response. Subsequently, the train speed and axle spacing are identified. In addition, based on the fact that the integral area of the structural strain response is a constant under a unit force at a unit speed, the gross train weight can be obtained from the integral area of the measured strain response. Meanwhile, the corrected second derivative peak values, in which the effect of time-varying velocity is eliminated, are selected to distribute the gross train weight. Hence the axle weights could be identified. Afterwards, numerical simulations are employed to verify the proposed method and investigate the effect of the sampling frequency on the identification accuracy. Eventually, the method is verified using the real-time strain data of a continuous steel truss railway bridge. Results show that train speed, axle spacing and gross train weight can be accurately identified in the time domain. However, only the approximate values of the axle weights could be obtained with the updated method. The identified results can provide reliable reference for determining fatigue deterioration and predicting the remaining service life of railway bridges.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. An, Y.H., Guan, D.L., Ding, Y.L. and Ou, J.P. (2017), "Fast warning method for rigid hangers in a high-speed railway arch bridge using long-term monitoring data", J. Perform. Constr. Fac., 31(6), 04017103. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001097
  2. Catbas, F.N., Zaurin, R., Gul, M. and Gokce, H.B. (2011), "Sensor networks, computer imaging, and unit influence lines for structural health monitoring: case study for bridge load rating", J. Bridge Eng., 17(4), 662-670. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000288
  3. Chan, T.H., Yu, L., Law, S.S. and Yung, T.H. (2001), "Moving force identification studies, I: theory", J. Sound Vib., 247(1), 59-76. https://doi.org/10.1006/jsvi.2001.3630
  4. Chan, T.H., Yu, L., Law, S.S. and Yung, T.H. (2001), "Moving force identification studies, II: comparative studies", J. Sound Vib., 247(1), 77-95. https://doi.org/10.1006/jsvi.2001.3629
  5. Deng, L. and Cai, C.S. (2010), "Identification of dynamic vehicular axle loads: theory and simulations", J. Vib. Control, 16(14), 2167-2194. https://doi.org/10.1177/1077546309351221
  6. Deng, Y., Liu, Y., Feng, D.M., and Li, A.Q. (2015), "Investigation of fatigue performance of welded details in long-span steel bridges using long-term monitoring strain data", Struct. Control Health Monit., 22(11), 1343-1358. https://doi.org/10.1002/stc.1747
  7. Ding, Y.L., Zhao, H.W., Deng, L., Li, A.Q. and Wang, M.Y. (2017), "Early warning of abnormal train-induced vibrations for a steeltruss arch railway bridge: case study", J. Bridge Eng., 22(11), 05017011. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001143
  8. Doebling, S.W., Farrar, C.R. and Prime, M.B. (1998), "A summary review of vibration-based damage identification methods", Shock Vib. Digest, 30(2), 91-105. https://doi.org/10.1177/058310249803000201
  9. Gu, Y.M., Li, S.L., Li, H. and Guo, Z.M. (2014), "A novel Bayesian extreme value distribution model of vehicle loads incorporating de-correlated tail fitting: theory and application to the Nanjing 3rd Yangtze River Bridge", Eng. Struct., 59, 386-392. https://doi.org/10.1016/j.engstruct.2013.10.029
  10. Ju, S.H. and Lin, H.T. (2003), "Numerical investigation of a steel arch bridge and interaction with high-speed trains", Eng. Struct., 25(2), 241-250. https://doi.org/10.1016/S0141-0296(02)00148-7
  11. Ju, S.H., Lin, H.T. and Huang, J. Y. (2009), "Dominant frequencies of train-induced vibrations", J. Sound Vib., 319(1-2), 247-259. https://doi.org/10.1016/j.jsv.2008.05.029
  12. Kim, Y.J. (2012), "Safety assessment of steel-plate girder bridges subjected to military load classification", Eng. Struct., 38(4), 21-31. https://doi.org/10.1016/j.engstruct.2012.01.002
  13. Law, S.S., Bu, J.Q., Zhu, X.Q. and Chan, S.L. (2004), "Vehicle axle loads identification using finite element method", Eng. Struct., 26(8), 1143-1153. https://doi.org/10.1016/j.engstruct.2004.03.017
  14. Law, S.S., Chan, T.H. and Zeng, Q.H. (1997), "Moving force identification: a time domain method", J. Sound Vib., 201(1), 1-22. https://doi.org/10.1006/jsvi.1996.0774
  15. Law, S.S., Chan, T.H. and Zeng, Q.H. (1999), "Moving force identification-a frequency and time domains analysis", J. Dynam. Syst. Measurement Control, 121(3), 394-401. https://doi.org/10.1115/1.2802487
  16. Long, Y.Q. and Bao, S.H. (2001), Structural Mechanics, High Education Press, Beijing, China.
  17. Lu, Y., Mao, L. and Woodward, P. (2012), "Frequency characteristics of railway bridge response to moving trains with consideration of train mass", Eng. Struct., 42(12), 9-22. https://doi.org/10.1016/j.engstruct.2012.04.007
  18. Lydon, M., Taylor, S.E., Robinson, D., Mufti, A. and Brien, E.J.O. (2016), "Recent developments in bridge weigh in motion (BWIM)", J. Civil Struct.Health Monit., 6(1), 69-81. https://doi.org/10.1007/s13349-015-0119-6
  19. Mao, J.X., Wang, H. and Li, J. (2018), "Fatigue reliability assessment of a long-span cable-stayed bridge based on oneyear monitoring strain data", J. Bridge Eng., 24(1), 05018015. https://doi.org/10.1061/(asce)be.1943-5592.0001337
  20. Mao, J.X., Wang, H., Feng, D.M., Tao, T.Y. and Zheng, W.Z. (2018), "Investigation of dynamic properties of long-span cablestayed bridges based on one-year monitoring data under normal operating condition", Struct. Control Health Monit., e2146. https://doi.org/10.1002/stc.2146
  21. Mao, J.X., Wang, H., Xun, Z.X. and Zou, Z.Q. (2017), "Variability analysis on modal parameters of Runyang Bridge during Typhoon Masta", Smart Struct. Syst., 19(6), 653-663. https://doi.org/10.12989/SSS.2017.19.6.653
  22. Marques, F., Moutinho, C., Hu, W.H., Cunha, A . and Caetano, E. (2016), "Weigh-in-motion implementation in an old metallic railway bridge", Eng. Struct., 123, 15-29. https://doi.org/10.1016/j.engstruct.2016.05.016
  23. Milne, D.R.M., Le Pen, L.M., Thompson, D.J. and Powrie, W. (2017), "Properties of train load frequencies and their applications", J. Sound Vib., 397, 123-140. https://doi.org/10.1016/j.jsv.2017.03.006
  24. Mori, T., Lee, H.H. and Kyung, K.S. (2007), "Fatigue life estimation parameter for short and medium span steel highway girder bridges", Eng. Struct., 29(10), 2762-2774. https://doi.org/10.1016/j.engstruct.2007.01.019
  25. Ni, Y.Q., Xia, H.W. and Ko, J.M. (2008), "Structural performance evaluation of Tsing Ma Bridge deck using long-term monitoring data", Modern Phys. Lett. B, 22(11), 875-880. https://doi.org/10.1142/S021798490801553X
  26. Ni, Y.Q., Xia, H.W., Wong, K.Y. and Ko, J.M. (2011), "In-service condition assessment of bridge deck using long-term monitoring data of strain response", J. Bridge Eng., 17(6), 876-885. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000321
  27. Ou, J.P. and Li, H. (2010), "Structural health monitoring in mainland China: review and future trends", Struct. Health Monit., 9(3), 219-231. https://doi.org/10.1177/1475921710365269
  28. Pan, C.D., Yu, L., Liu, H.L., Chen, Z.P. and Luo, W.F. (2018), "Moving force identification based on redundant concatenated dictionary and weighted l1-norm regularization", Mech. Syst. Signal Pr., 98, 32-49. https://doi.org/10.1016/j.ymssp.2017.04.032
  29. Spencer Jr, B.F., Moreu, F. and Kim, R.E. (2015), "Campaign monitoring of railroad bridges in high-speed rail shared corridors using wireless smart sensors", Newmark Structural Engineering Laboratory, University of Illinois at Urbana-Champaign.
  30. Sun, S.W., Sun, L.M. and Chen, L. (2016), "Damage detection based on structural responses induced by traffic load: methodology and application", Int. J. Struct. Stab. Dynam., 16(4), 1640026. https://doi.org/10.1142/S0219455416400265
  31. Tao, T.Y., Wang, H., Hu, S.T. and Zhao, X.X. "Dynamic behavior of a steel-truss railway bridge under the action of moving trains", J. Perform. Constr. Fac., (Accepted for publication)
  32. Wang, H., Tao, T.Y., Li, A.Q. and Zhang, Y.F. (2016), "Structural health monitoring system for Sutong cable-stayed bridge", Smart Struct. Syst., 18(2), 317-334. https://doi.org/10.12989/sss.2016.18.2.317
  33. Wang, N.B., Ren, W.X. and He, L.X. (2014), "Extraction of strain influence line of bridge from dynamic responses", J. Central South Univ., 45(12), 4363-4369.
  34. Wu, S.Q. and Law, S.S. (2010), "Moving force identification based on stochastic finite element model", Eng. Struct., 32(4), 1016-1027. https://doi.org/10.1016/j.engstruct.2009.12.028
  35. Xia, H., Zhang, N. and Guo, W.W. (2006), "Analysis of resonance mechanism and conditions of train-bridge system", J. Sound Vib., 297(3-5), 810-822. https://doi.org/10.1016/j.jsv.2006.04.022
  36. Xu, Y.L., Chen, B., Ng, C.L., Wong, K.Y. and Chan, W.Y. (2010), "Monitoring temperature effect on a long suspension bridge", Struct. Control Health Monit., 17(6), 632-653. https://doi.org/10.1002/stc.340
  37. Yang, S.I., Frangopol, D.M. and Neves, L.C. (2004), "Service life prediction of structural systems using lifetime functions with emphasis on bridges", Reliab. Eng. Syst. Saf., 86(1), 39-51. https://doi.org/10.1016/j.ress.2003.12.009
  38. Yu, L. and Chan, T.H. (2007), "Recent research on identification of moving loads on bridges", J. Sound Vib., 305(1-2), 3-21. https://doi.org/10.1016/j.jsv.2007.03.057
  39. Yu, Y., Cai, C.S. and Deng, L. (2016), "State-of-the-art review on bridge weigh-in-motion technology", Adv. Struct. Eng., 19(9), 1514-1530. https://doi.org/10.1177/1369433216655922
  40. Yu, Y., Cai, C.S. and Deng, L. (2017), "Vehicle axle identification using wavelet analysis of bridge global responses", J. Vib. Control, 23(17), 2830-2840. https://doi.org/10.1177/1077546315623147
  41. Zaurin, R. and Catbas, F.N. (2009), "Integration of computer imaging and sensor data for structural health monitoring of bridges", Smart Mater. Struct., 19(1), 015019. https://doi.org/10.1088/0964-1726/19/1/015019
  42. Zaurin, R. and Necati Catbas, F. (2011), "Structural health monitoring using video stream, influence lines, and statistical analysis", Struct. Health Monit., 10(3), 309-332. https://doi.org/10.1177/1475921710373290
  43. Zhao, H., Uddin, N., O'Brien, E.J., Shao, X. and Zhu, P. (2013), "Identification of vehicular axle weights with a bridge weigh-inmotion system considering transverse distribution of wheel loads", J. Bridge Eng., 19(3), 04013008. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000533
  44. Zhao, H.W., Ding, Y.L., An, Y.H. and Li, A.Q. (2016), "Transverse dynamic mechanical behavior of hangers in the rigid tied-arch bridge under train loads", J. Perform. Constr. Fac., 31(1), 04016072. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000932
  45. Zhu, X.Q. and Law, S.S. (2003), "Identification of moving interaction forces with incomplete velocity information", Mech. Syst. Signal Pr., 17(6), 1349-1366. https://doi.org/10.1006/mssp.2002.1577
  46. Zhu, X.Q. and Law, S.S. (2016), "Recent developments in inverse problems of vehicle-bridge interaction dynamics", J. Civil Struct. Health Monit., 6(1), 107-128. https://doi.org/10.1007/s13349-016-0155-x