Structural Engineering and Mechanics

  • 제69권6호
  • /
  • Pages.667-676
  • /
  • 2019
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Ant lion optimizer for optimization of finite perforated metallic plate

  • Chaleshtaria, Mohammad H. Bayati (Faculty of Mechanical and Mechatronics Engineering, Shahrood University of Technology) ;
  • Jafari, Mohammad (Faculty of Mechanical and Mechatronics Engineering, Shahrood University of Technology)
  • 투고 : 2017.08.31
  • 심사 : 2019.02.05
  • 발행 : 2019.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

Minimizing the stress concentration around hypotrochoid hole in finite metallic plates under in-plane loading is an important consideration in engineering design. In the analysis of finite metallic plate, the effective factors on stress distribution around holes include curvature radius of the corner of the hole, hole orientation, plate's aspect ratio, and hole size. This paper aims to investigate the impact of these factors on stress analysis of finite metallic plate with central hypotrochoid hole. To obtain the lowest value of stress around a hypotrochoid hole, a swarm intelligence optimization method named ant lion optimizer is used. In this study, with the hypothesis of plane stress circumstances, analytical solution of Muskhelishvili's complex variable method and conformal mapping is employed. The plate is taken into account to be finite, isotropic and linearly elastic. By applying suitable boundary conditions and least square boundary collocation technique, undefined coefficients of stress function are found. The results revealed that by choosing the above-mentioned factor correctly, the lowest value of stress would be obtained around the hole allowing to an increment in load-bearing capacity of the structure.

키워드

참고문헌

  1. Banerjee, M., Jain, N.K. and Sanyal, S. (2013), "Stress concentration in isotropic & orthotropic composite plates with center circular hole subjected to transverse static loading", Int. J. Mech. Industr. Eng., 3(1), 109-113.
  2. Banh, T.T. and Lee, D. (2018), "Multi-material topology optimization design for continuum structures with crack patterns", Compos. Struct., 186, 193-209. https://doi.org/10.1016/j.compstruct.2017.11.088
  3. Batista, M. (2011), "On the stress concentration around a hole in an infinite plate subject to a uniform load at infinity", Int. J. Mech. Sci., 53(4), 254-261. https://doi.org/10.1016/j.ijmecsci.2011.01.006
  4. Dashti, A., Asghari, M., Dehghani, M., Rezakazemi, M., Mohammadi, A.H. and Bhatia, S.K. (2018), "Molecular dynamics, grand canonical Monte Carlo and expert simulations and modeling of water-acetic acid pervaporation using polyvinyl alcohol/tetraethyl orthosilicates membrane", J. Molecul. Liq., 265, 53-68. https://doi.org/10.1016/j.molliq.2018.05.078
  5. Dashti, A., Asghari, M., Solymani, H., Rezakazemi, M. and Akbari, A. (2018), "Modeling of $CaCl_2$ removal by positively charged polysulfone-based nanofiltration membrane using artificial neural network and genetic programming", Desalinat. Water Treat., 111, 57-67. https://doi.org/10.5004/dwt.2018.22079
  6. Dashti, A., Harami, H.R. and Rezakazemi, M. (2018), "Accurate prediction of solubility of gases within H2-selective nanocomposite membranes using committee machine intelligent system", Int. J. Hydrog. Energy, 43(13), 6614-6624. https://doi.org/10.1016/j.ijhydene.2018.02.046
  7. Dashti, A., Riasat Harami, H., Rezakazemi, M. and Shirazian, S. (2018), "Estimating CH4 and $CO_2$ solubilities in ionic liquids using computational intelligence approaches", J. Molecul. Liq., 271, 661-669. https://doi.org/10.1016/j.molliq.2018.08.150
  8. Jafari, M. and Ardalani, E. (2016), "Stress concentration in finite metallic plates with regular holes", Int. J. Mech. Sci., 106, 220-230. https://doi.org/10.1016/j.ijmecsci.2015.12.022
  9. Jafari, M. and Bayati Chaleshtari, M.H. (2017), "Optimum design of effective parameters for orthotropic plates with polygonal cut-out", Lat. Am. J. Sol. Struct., 14, 906-929. https://doi.org/10.1590/1679-78253437
  10. Jafari, M. and Bayati Chaleshtari, M.H. (2017), "Using dragonfly algorithm for optimization of orthotropic infinite plates with a quasi-triangular cut-out", Eur. J. Mech.-A/Sol., 66, 1-14.
  11. Jafari, M., Moussavian, H. and Chaleshtari, M.H.B.J.S. (2018), "Optimum design of perforated orthotropic and laminated composite plates under in-plane loading by genetic algorithm", Struct. Multidiscipl. Optim., 57(1), 341-357. https://doi.org/10.1007/s00158-017-1758-5
  12. Louhghalam, A., Igusa, T., Park, C., Choi, S. and Kim, K. (2011), "Analysis of stress concentrations in plates with rectangular openings by a combined conformal mapping-finite element approach", Int. J. Sol. Struct., 48(13), 1991-2004. https://doi.org/10.1016/j.ijsolstr.2011.03.005
  13. Mirjalili, S. (2015), "The ant lion optimizer", Adv. Eng. Softw., 83, 80-98. https://doi.org/10.1016/j.advengsoft.2015.01.010
  14. Motok, M.D. (1997), "Stress concentration on the contour of a plate opening of an arbitrary corner radius of curvature", Mar. Struct., 10(1), 1-12. https://doi.org/10.1016/S0951-8339(96)00012-3
  15. Mouassa, S., Bouktir, T. and Salhi, A. (2017), "Ant lion optimizer for solving optimal reactive power dispatch problem in power systems", Eng. Sci. Technol., 20(3), 885-895.
  16. Muskhelishvili, N. (1966), Some Basic Problems of the Mathematical Theory of Elasticity, Nauka, Moscow, Russia.
  17. Nischal, M.M. and Mehta, S. (2015), "Optimal load dispatch using ant lion optimization", Int. J. Eng. Res. Appl., 5(8), 10-19.
  18. Nischal, M.M. and Shivani, M. (2015), "Optimal load dispatch using ant lion optimization", Int. J. Eng. Res. Appl., 5(8), 10-19.
  19. Pan, Z., Cheng, Y. and Liu, J. (2013), "Stress analysis of a finite plate with a rectangular hole subjected to uniaxial tension using modified stress functions", Int. J. Mech. Sci., 75, 265-277. https://doi.org/10.1016/j.ijmecsci.2013.06.014
  20. Petrovic, M., Petronijevic, J., Mitic, M. and Vukovic, N. (2015), "The ant lion optimization algorithm for flexible process planning", Product. Eng., 18(2), 65-68.
  21. Rezakazemi, M., Azarafza, A., Dashti, A. and Shirazian, S. (2018), "Development of hybrid models for prediction of gas permeation through FS/POSS/PDMS nanocomposite membranes", Int. J. Hydrog. Energy, 43(36), 17283-17294. https://doi.org/10.1016/j.ijhydene.2018.07.124
  22. Rezakazemi, M., Dashti, A., Asghari, M. and Shirazian, S. (2017), "H2-selective mixed matrix membranes modeling using ANFIS, PSO-ANFIS, GA-ANFIS", Int. J. Hydrog. Energy, 42(22), 15211-15225. https://doi.org/10.1016/j.ijhydene.2017.04.044
  23. Rezakazemi, M., Razavi, S., Mohammadi, T. and Nazari, A.G. (2011), "Simulation and determination of optimum conditions of pervaporative dehydration of isopropanol process using synthesized PVA-APTEOS/TEOS nanocomposite membranes by means of expert systems", J. Membr. Sci., 379(1), 224-232. https://doi.org/10.1016/j.memsci.2011.05.070
  24. Yao, P. and Wang, H. (2017), "Dynamic adaptive ant lion optimizer applied to route planning for unmanned aerial vehicle", Soft Comput., 21(18), 5475-5488. https://doi.org/10.1007/s00500-016-2138-6

피인용 문헌

  1. Effect of stacking sequence on thermal stresses in laminated plates with a quasi-square cutout using the complex variable method vol.77, pp.2, 2021, https://doi.org/10.12989/sem.2021.77.2.245