Structural Engineering and Mechanics

  • 제69권6호
  • /
  • Pages.627-635
  • /
  • 2019
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Mechanical performance of sand-lightweight concrete-filled steel tube stub column under axial compression

  • Zhang, Xianggang (Henan Province Engineering Laboratory of Eco-Architecture and the Built Environment, Henan Polytechnic University) ;
  • Deng, Dapeng (School of Civil Engineering, Henan Polytechnic University) ;
  • Lin, Xinyan (Henan Province Engineering Laboratory of Eco-Architecture and the Built Environment, Henan Polytechnic University) ;
  • Yang, Jianhui (Henan Province Engineering Laboratory of Eco-Architecture and the Built Environment, Henan Polytechnic University) ;
  • Fu, Lei (Henan Province Engineering Laboratory of Eco-Architecture and the Built Environment, Henan Polytechnic University)
  • 투고 : 2018.06.21
  • 심사 : 2019.01.30
  • 발행 : 2019.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

In order to study the axial compression performance of sand-lightweight concrete-filled steel tube (SLCFST) stub columns, three circular SLCFST (C-SLCFST) stub column specimens and three SLCFST square (S-SLCFST) stub column specimens were fabricated and static monotonic axial compression performance testing was carried out, using the volume ratio between river sand and ceramic sand in sand-lightweight concrete (SLC) as a varying parameter. The stress process and failure mode of the specimens were observed, stress-strain curves were obtained and analysed for the specimens, and the ultimate bearing capacity of SLCFST stub column specimens was calculated based on unified strength theory, limit equilibrium theory and superposition theory. The results show that the outer steel tubes of SLCFST stub columns buckled outward, core SLC was crushed, and the damage to the upper parts of the S-SLCFST stub columns was more serious than for C-SLCFST stub columns. Three stages can be identified in the stress-strain curves of SLCFST stub columns: an elastic stage, an elastic-plastic stage and a plastic stage. It is suggested that AIJ-1997, CECS 159:2004 or AIJ-1997, based on superposition theory, can be used to design the ultimate bearing capacity under axial compression for C-SLCFST and S-SLCFST stub columns; for varying replacement ratios of natural river sand, the calculated stress-strain curves for SLCFST stub columns under axial compression show good fitting to the test measure curves.

키워드

참고문헌

  1. Abdelgadir, E., Ji, B.H., Fu, Z.Q. and Hu, Z.Q. (2011), "The behaviour of lightweight aggregate concrete-filled steel tube columns under eccentric loading", Steel Compos. Struct., 11(6), 469-488. https://doi.org/10.12989/scs.2011.11.6.469
  2. ACI-2005 (2005), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Detroit, U.S.A.
  3. AIJ-1997 (1997), Recommendations for Design and Construction of Concrete-Filled Steel Tubular Structures, Architectural Institute of Japan, Tokyo, Japan.
  4. AL-Eliwi, B.J.M., Ekmekyapar, T., Faraj, R.H., Gogus, M.T. and AL-Shaar, A.A.M. (2017), "Performance of lightweight aggregate and self-compacted concrete-filled steel tube columns", Steel Compos. Struct., 25(3), 299-314. https://doi.org/10.12989/SCS.2017.25.3.299
  5. Amel, C.L., Kadri, E.H., Sebaibi, Y. and Soualhi, H. (2017), "Dune sand and pumice impact on mechanical and thermal lightweight concrete properties", Constr. Build. Mater., 133, 209-218. https://doi.org/10.1016/j.conbuildmat.2016.12.043
  6. Assi, I.M., Qudeimat, E.M. and Hunaiti, Y.M. (2003), "Ultimate moment capacity of foamed and lightweight aggregate concretefilled steel tubes", Steel Compos. Struct., 3(3), 199-212. https://doi.org/10.12989/scs.2003.3.3.199
  7. Ayati, B., Ferrandiz-Mas, V., Newport, D. and Cheeseman, C. (2018), "Use of clay in the manufacture of lightweight aggregate", Constr. Build. Mater., 162, 124-131. https://doi.org/10.1016/j.conbuildmat.2017.12.018
  8. Carrillo, J., Lizarazo, J.M. and Bonett, R. (2015), "Effect of lightweight and low-strength concrete on seismic performance of thin lightly-reinforced shear walls", Eng. Struct., 93, 61-69. https://doi.org/10.1016/j.engstruct.2015.03.022
  9. CECS 159 (2004), Technical Specification for Structures with Concrete-Filled Rectangular Steel Tube Members, China Planning Press, Beijing, China.
  10. CECS 28 (2012), Technical Specification for Concrete-Filled Steel Tubular Structures, China Planning Press, Beijing, China.
  11. Chien, L.K., Kuo, Y.H., Huang, C.H., Chen, H.J. and Cheng, P.H. (2014), "Flexural behaviour of reinforced lightweight concrete beams under reversed cyclic loading", Struct. Eng. Mech., 52(3), 559-572. https://doi.org/10.12989/sem.2014.52.3.559
  12. Choi, S.J., Yang, K.H., Sim, J.I. and Choi, B.J. (2014), "Direct tensile strength of lightweight concrete with different specimen depths and aggregate sizes", Constr. Build. Mater., 63, 132-141. https://doi.org/10.1016/j.conbuildmat.2014.04.055
  13. Dong, W., Shen, X.D., Xue, H.J., He, J. and Liu, Y. (2016), "Research on the freeze-thaw cyclic test and damage model of Aeolian sand lightweight aggregate concrete", Constr. Build. Mater., 123, 792-799. https://doi.org/10.1016/j.conbuildmat.2016.07.052
  14. EC4-2004 (2004), Design of Composite Steel and Concrete Structures, European Committee for Standardisation, Brussels, Belgium.
  15. Fu, Z.Q., Ji, B.H., Ge, H.B. and Yang, M. (2016), "Combined strength of lightweight aggregate concrete-filled steel tube", Mater. Res. Innov., 19(5), 898-901.
  16. Fu, Z.Q., Ji, B.H., Maeno, H., Eizien, A. and Chen, J. (2014), "Flexural behavior of lightweight aggregate concrete-filled steel tube", Adv. Steel Constr., 10(4), 385-403.
  17. Ghannam, S., Jawad, Y.A. and Hunaiti, Y. (2004), "Failure of lightweight aggregate concrete-filled steel tubular columns", Steel Compos. Struct., 4(1), 1-8. https://doi.org/10.12989/scs.2004.4.1.001
  18. Han, L.H. (2016), Concrete-Filled Steel Tubular Structures, Theory and Practice, 3rd Edition, Science Press, Beijing, China.
  19. Liu, F., Gardner, L. and Yang, H. (2014), "Post-fire behaviour of reinforced concrete stub columns confined by circular steel tubes", J. Constr. Steel Res., 102(11), 82-103. https://doi.org/10.1016/j.jcsr.2014.06.015
  20. Meng, W. and Khayat, K. (2017), "Effects of saturated lightweight sand content on key characteristics of ultra-high-performance concrete", Cement Concrete Res., 101, 46-54. https://doi.org/10.1016/j.cemconres.2017.08.018
  21. Min, Y.U., Zha, X., Ye, J.Q. and Li, Y.T. (2013), "A unified formulation for circle and polygon concrete-filled steel tube columns under axial compression", Eng. Struct., 49(2), 1-10. https://doi.org/10.1016/j.engstruct.2012.10.018
  22. Montejo, L.A. (2012), "Seismic performance evaluation of reinforced concrete-filled steel tube pile/column bridge bents", J. Earthq. Eng., 16(3), 401-424. https://doi.org/10.1080/13632469.2011.614678
  23. Obaidat, Y.T. and Haddad, R.H. (2016), "Prediction of residual mechanical behavior of heat-exposed LWAC short column: A NLFE model", Struct. Eng. Mech., 57(2), 265-280. https://doi.org/10.12989/sem.2016.57.2.265
  24. Shafigh, P., Alengaram, U.J., Mahmud, H.B. and Jumaat, M.Z. (2013), "Engineering properties of oil palm shell lightweight concrete containing fly ash", Mater. Des., 49(1), 613-621. https://doi.org/10.1016/j.matdes.2013.02.004
  25. Tang, C.W. (2017), "Uniaxial bond stress-slip behaviour of reinforcing bars embedded in lightweight aggregate concrete", Struct. Eng. Mech., 62(5), 651-661. https://doi.org/10.12989/SEM.2017.62.5.651
  26. Tao, Z., Han, L.H., Uy, B. and Chen, X. (2016), "Post-fire bond between the steel tube and concrete in concrete-filled steel tubular columns", J. Constr. Steel Res., 67(3), 484-496. https://doi.org/10.1016/j.jcsr.2010.09.006
  27. Tu, Y.Q., Shen, Y.F., Zeng, Y.G. and Ma, L.Y. (2014), "Hysteretic behaviour of multi-cell T-shaped concrete-filled steel tubular columns", Thin Wall Struct., 85, 106-116. https://doi.org/10.1016/j.tws.2014.08.005
  28. Yang, K.H. and Ashour, A.F. (2011), "Aggregate interlock in lightweight concrete continuous deep beams", Eng. Struct., 26(1), 136-145. https://doi.org/10.1016/j.engstruct.2010.09.026
  29. Zhang, D.J., Ma, Y.S. and Wang, Y. (2015), "Compressive behaviour of concrete filled steel tubular columns subjected to long-term loading", Thin Wall Struct., 89, 205-211. https://doi.org/10.1016/j.tws.2014.12.020
  30. Zhang, X.G., Deng, D.P. and Yang, J.H. (2018), "Mechanical properties and conversion relations of strength indexes for stone/sand-lightweight aggregate concrete", Adv. Mater. Sci. Eng., 5402953.
  31. Zhang, X.G., Kuang, X.M., Yang, J.H. and Wang, S.R. (2017), "Experimental study on mechanical properties of lightweight concrete with shale aggregate replaced partially by nature sand", Electron. J. Struct. Eng., 17(1), 85-94.
  32. Zhong, S.T. (2003), The Concrete-Filled Steel Tube Structures, Tsinghua University Press, Beijing, China.