Steel and Composite Structures

  • 제30권5호
  • /
  • Pages.443-456
  • /
  • 2019
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Cyclic behaviour of infilled steel frames with different beam-to-column connection types

  • Sakr, Mohammed A. (Department of Structural Engineering, Faculty of Engineering, Tanta University) ;
  • Eladly, Mohammed M. (Department of Structural Engineering, Faculty of Engineering, Tanta University) ;
  • Khalifa, Tarek (Department of Structural Engineering, Faculty of Engineering, Tanta University) ;
  • El-Khoriby, Saher (Department of Structural Engineering, Faculty of Engineering, Tanta University)
  • 투고 : 2018.09.22
  • 심사 : 2019.03.05
  • 발행 : 2019.03.10
⟨ 이전 논문 다음 논문 ⟩

초록

Although numerous researchers demonstrated the significant difference in performance between the various beam-to-column connection types, most of the previous studies in the area of infilled steel frames focused on the behaviour of frames with welded connections. Therefore, there is a need for conducting studies on infilled steel frames with other common connection types (extended endplate with and without rib stiffeners, flush endplate and shear connections). In this paper, firstly, a two-dimensional finite-element model simulating the cyclic response of infilled steel frames was presented. The infill-frame interaction, as well as the interactions between connections' components, were properly modelled. Using the previously-validated model, a parametric study on infilled steel frames with five different beam-to-column connection types, under cyclic loading, was carried out. Several parameters, including infill material, fracture energy of masonry and infill thickness, were investigated. The results showed that the infilled frames with welded connections had the highest initial stiffness and load-carrying capacity. However, the infilled frames with extended endplate connections (without rib stiffeners) showed the greatest energy dissipation capacity and about 96% of the load-carrying capacity of frames with welded connections which indicates that this type of connection could have the best performance among the studied connection types. Finally, a simplified analytical model for estimating the stiffness and strength of infilled steel frames (with different beam-to-column connection types) subjected to lateral cyclic loading, was suggested.

키워드

참고문헌

  1. ABAQUS (2012), Analysis User's Manual, Version 6.12, Dassault Systemes; USA.
  2. Agnihotri, P., Singhal, V. and Rai, D.C. (2013), "Effect of in-plane damage on out-of-plane strength of unreinforced masonry walls", Eng. Struct., 57, 1-11. https://doi.org/10.1016/j.engstruct.2013.09.004
  3. Asteris, P.G., Cotsovos, D.M., Chrysostomou, C.Z., Mohebkhah, A. and Al-Chaar, G.K. (2013), "Mathematical micromodeling of infilled frames: State of the art", Eng. Struct., 56, 1905-1921. https://doi.org/10.1016/j.engstruct.2013.08.010
  4. Baloevic, G., Radnic, J., Grgic, N. and Matesan, D. (2017), "Shake-table study of plaster effects on the behavior of masonry-infilled steel frames", Steel Compos. Struct., Int. J., 23(2), 195-204. https://doi.org/10.12989/scs.2017.23.2.195
  5. Bayat, M. and Zahrai, S. (2017), "Seismic performance of mid-rise steel frames with semi-rigid connections having different moment capacity", Steel Compos. Struct., Int. J., 25(1), 1-17.
  6. Chaboche, J.L. (1986), "Time-independent constitutive theories for cyclic plasticity", Int. J. Plast., 2(2), 149-188. https://doi.org/10.1016/0749-6419(86)90010-0
  7. Chaboche, J.L. (1989), "Constitutive equations for cyclic plasticity and cyclic viscoplasticity", Int. J. Plast., 5(3), 247-302. https://doi.org/10.1016/0749-6419(89)90015-6
  8. Chen, X. and Liu, Y. (2016), "A finite element study of the effect of vertical loading on the in-plane behavior of concrete masonry infills bounded by steel frames", Eng. Struct., 117, 118-129. https://doi.org/10.1016/j.engstruct.2016.03.010
  9. Dawe, J.L., Schriver, A.B. and Sofocleous, C. (1989), "Masonry infilled steel frames subjected to dynamic load", Can. J. Civ. Eng., 16(6), 877-885. https://doi.org/10.1139/l89-130
  10. Dawe, J.L., Seah, C.K. and Liu, Y. (2001a), "A computer model for predicting infilled frame behaviour", Can. J. Civ. Eng., 28(1), 133-148. https://doi.org/10.1139/l00-083
  11. Dawe, J.L., Liu, Y. and Seah, C.K. (2001b), "A parametric study of masonry infilled steel frames", Can. J. Civ. Eng., 28(1), 149-157. https://doi.org/10.1139/l00-084
  12. Diaz, C., Victoria, M., Marti, P. and Querin, O.M. (2011), "FE model of beam-to-column extended end-plate joints", J. Constr. Steel Res., 67(10), 1578-1590. https://doi.org/10.1016/j.jcsr.2011.04.002
  13. Eladly, M.M. (2016), "The behavior of masonry infilled steel frames subjected to cyclic loading", M.Sc. Thesis; Tanta University, Tanta, Egypt.
  14. Eladly, M.M. (2017), "Numerical study on masonry-infilled steel frames under vertical and cyclic horizontal loads", J. Constr. Steel Res., 138, 308-323. https://doi.org/10.1016/j.jcsr.2017.07.016
  15. El-Khoriby, S., Sakr, M.A., Khalifa, T.M. and Eladly, M.M. (2017), "Modelling and behaviour of beam-to-column connections under axial force and cyclic bending", J. Constr. Steel Res., 129, 171-184. https://doi.org/10.1016/j.jcsr.2016.11.006
  16. Eurocode (2005), Design of Steel Structures. Part 1.8: Design of joints, European Committee for Standardization; Brussels, Belgium.
  17. Fang, M.J., Wang, J.F. and Li, G.Q. (2013), "Shaking table test of steel frame with ALC external wall panels", J. Constr. Steel Res., 80, 278-286. https://doi.org/10.1016/j.jcsr.2012.07.009
  18. Feizi, M.G., Mojtahedi, A. and Nourani, V. (2015), "Effect of semi-rigid connections in improvement of seismic performance of steel moment-resisting frames", Steel Compos. Struct., Int. J., 19(2), 467-484. https://doi.org/10.12989/scs.2015.19.2.467
  19. Flanagan, R.D. and Bennett, R.M. (1999), "Bidirectional Behavior of Structural Clay Tile Infilled Frames", J. Struct. Eng., ASCE, 125(3), 236-244. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:3(236)
  20. Gambarotta, L. and Lagomarsino, S. (1997a), "Damage models for the seismic response of brick masonry shear walls. Part I: the mortar joint model and its applications", Earthq. Eng. Struct. Dyn., 26(4), 423-439. https://doi.org/10.1002/(SICI)1096-9845(199704)26:4<423::AID-EQE650>3.0.CO;2-#
  21. Gambarotta, L. and Lagomarsino, S. (1997b), "Damage models for the seismic response of brick masonry shear walls. Part II: the continuum model and its application", Earthq. Eng. Struct. Dyn., 26(4), 441-462. https://doi.org/10.1002/(SICI)1096-9845(199704)26:4<441::AID-EQE651>3.0.CO;2-0
  22. Ghassemieh, M., Baei, M., Kari, A., Goudarzi, A. and Laefer, D.F. (2015), "Adopting flexibility of the end-plate connections in steel moment frames", Steel Compos. Struct., Int. J., 18(5), 1215-1237. https://doi.org/10.12989/scs.2015.18.5.1215
  23. Giordano, A., Mele, E. and De Luca, A. (2002), "Modelling of historical masonry structures: comparison of different approaches through a case study", Eng. Struct., 24(8), 1057-1069. https://doi.org/10.1016/S0141-0296(02)00033-0
  24. Hariri-Ardebili, M.A., Samani, H.R. and Mirtaheri, M. (2014), "Free and Forced Vibration Analysis of an Infilled Steel Frame: Experimental, Numerical, and Analytical Methods", Shock Vib., 2014, 1-14. https://doi.org/10.1155/2014/439591
  25. Hoenderkamp, J.C.D., Snijder, H.H. and Hofmeyer, H. (2015), "Racking shear resistance of steel frames with corner connected precast concrete infill panels", Steel Compos. Struct., Int. J., 19(6), 1403-1419. https://doi.org/10.12989/scs.2015.19.6.1403
  26. Jazany, R.A., Hajirasouliha, I. and Farshchi, H. (2013), "Influence of masonry infill on the seismic performance of concentrically braced frames", J. Constr. Steel Res., 88, 150-163. https://doi.org/10.1016/j.jcsr.2013.05.009
  27. Liu, Y. and Manesh, P. (2013), "Concrete masonry infilled steel frames subjected to combined in-plane lateral and axial loading - An experimental study", Eng. Struct., 52, 331-339. https://doi.org/10.1016/j.engstruct.2013.02.038
  28. Liu, Y. and Soon, S. (2012), "Experimental study of concrete masonry infills bounded by steel frames", Can. J. Civ. Eng., 39(2), 180-190. https://doi.org/10.1139/l11-122
  29. Mainstone, R. (1971), "Summary of paper 7360. On the stiffness and strengths of infilled frames", Proc. Inst. Civ. Eng., 49(2), 230.
  30. Markulak, D., Radic, I. and Sigmund, V. (2013), "Cyclic testing of single bay steel frames with various types of masonry infill", Eng. Struct., 51, 267-277. https://doi.org/10.1016/j.engstruct.2013.01.026
  31. Moghadam, H.A., Mohammadi, M.G. and Ghaemian, M. (2006), "Experimental and analytical investigation into crack strength determination of infilled steel frames", J. Constr. Steel Res., 62(12), 1341-1352. https://doi.org/10.1016/j.jcsr.2006.01.002
  32. Puglisi, M., Uzcategui, M. and Florez-Lopez, J. (2009a), "Modeling of masonry of infilled frames, Part I: The plastic concentrator", Eng. Struct., 31(1), 113-118. https://doi.org/10.1016/j.engstruct.2008.07.012
  33. Puglisi, M., Uzcategui, M. and Florez-Lopez, J. (2009b), "Modeling of masonry of infilled frames, Part II: Cracking and damage", Eng. Struct., 31(1), 119-124. https://doi.org/10.1016/j.engstruct.2008.07.013
  34. Quayyum, S., Alam, M.S. and Rteil, A. (2013), "Seismic behavior of soft storey mid-rise steel frames with randomly distributed masonry infill", Steel Compos. Struct., Int. J., 14(6), 523-545. https://doi.org/10.12989/scs.2013.14.6.523
  35. Radic, I., Markulak, D. and Sigmund, V. (2016), "Analytical modelling of masonry-infilled steel frames", Teh. Vjesn. - Tech. Gaz., 23(1), 115-127.
  36. Radnic, J., Matesan, D., Harapin, A., Smilovic, M. and Grgic, N. (2012), Numerical Model for Static and Dynamic Analysis of Masonry Structures (Chapter in Advanced Structured Materials 31 Book, pages 1-33), Springer Berlin Heidelberg, Heidelberg, Baden-Wurttemberg, Germany.
  37. Radnic, J., Baloevic, G., Matesan, D. and Smilovic, M. (2013), "On a numerical model for static and dynamic analysis of inplane masonry infilled steel frames", Materwiss. Werksttech., 44(5), 423-430. https://doi.org/10.1002/mawe.201300146
  38. Rots, J.G. (1997), Structural Masonry: An Experimental/Numerical Basis for Practical Design Rules (CUR Report 171), A.A. Balkema Publishers, Rotterdam, South Holland, Netherlands.
  39. Saneinejad, A. and Hobbs, B. (1995), "Inelastic Design of Infilled Frames", J. Struct. Eng., ASCE, 121(4), 634-650. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:4(634)
  40. Shi, G., Shi, Y., Wang, Y. and Bradford, M.A. (2008), "Numerical simulation of steel pretensioned bolted end-plate connections of different types and details", Eng. Struct., 30(10), 2677-2686. https://doi.org/10.1016/j.engstruct.2008.02.013
  41. Smith, B.S. and Carter, C. (1969), "A method of analysis for infilled frames", Proc. Inst. Civ. Eng., 44(1), 31-48.
  42. Tasnimi, A.A. and Mohebkhah, A. (2011), "Investigation on the behavior of brick-infilled steel frames with openings, experimental and analytical approaches", Eng. Struct., 33(3), 968-980. https://doi.org/10.1016/j.engstruct.2010.12.018
  43. Teeuwen, P.A., Kleinman, C.S., Snijder, H.H. and Hofmeyer, H. (2010), "Experimental and numerical investigations into the composite behaviour of steel frames and precast concrete infill panels with window openings", Steel Compos. Struct., Int. J., 10(1), 1-21.
  44. Tong, X., Hajjar, J.F., Schultz, A.E. and Shield, C.K. (2005), "Cyclic behavior of steel frame structures with composite reinforced concrete infill walls and partially-restrained connections", J. Constr. Steel Res., 61(4), 531-552. https://doi.org/10.1016/j.jcsr.2004.10.002
  45. Wang, M., Shi, Y., Wang, Y. and Shi, G. (2013), "Numerical study on seismic behaviors of steel frame end-plate connections", J. Constr. Steel Res., 90, 140-152. https://doi.org/10.1016/j.jcsr.2013.07.033
  46. Wittmann, F.H., Mihashi, H. and Nomura, N. (1990), "Size effect on fracture energy of concrete", Eng. Fract. Mech., 35, 107-115. https://doi.org/10.1016/0013-7944(90)90188-M
  47. Yekrangnia, M. and Mohammadi, M. (2017), "A new strut model for solid masonry infills in steel frames", Eng. Struct., 135, 222-235. https://doi.org/10.1016/j.engstruct.2016.10.048
  48. Yuksel, E., Ozkaynak, H., Buyukozturk, O., Yalcin, C., Dindar, A.A., Surmeli, M. and Tastan, D. (2010), "Performance of alternative CFRP retrofitting schemes used in infilled RC frames", Constr. Build. Mater., 24(4), 596-609. https://doi.org/10.1016/j.conbuildmat.2009.09.005