Acknowledgement
Supported by : European Commission
References
- Babic, A. and Dolsek, M. (2016), "Seismic fragility functions of industrial precast building classes", Eng. Struct., 118, 357-370. https://doi.org/10.1016/j.engstruct.2016.03.069
- Baird, A., Palermo, A. and Pampanin, S. (2012), "Experimental and numerical validation of seismic interaction between cladding systems and moment resisting frames", Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal, September; Paper No. 1981.
- Batalha, N., Rodrigues, H. and Varum, H. (2019), "Seismic performance of RC precast industrial buildings-learning with the past earthquakes", Innov. Infrastr. Sol., 4(1), 4. https://doi.org/10.1007/s41062-018-0191-y
- Belleri, A. (2017), "Displacement based design for precast concrete frames with not-emulative connections", Eng. Struct., 141, 228-240. https://doi.org/10.1016/j.engstruct.2017.03.020
- Belleri, A., Brunesi, E., Nascimbene, R., Pagani, M. and Riva, P. (2015), "Seismic performance of precast industrial facilities following major earthquakes in the Italian territory", J. Perform. Constr. Facil., 29(5), 04014135. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000617
- Belleri, A., Cornali, F., Passoni, C., Marini, A. and Riva, P. (2018), "Evaluation of out-of-plane seismic performance of column-tocolumn precast concrete cladding panels in one-storey industrial buildings", Earthq. Eng. Struct. Dyn., 47(2), 397-417. https://doi.org/10.1002/eqe.2956
- Belleri, A., Schoettler, M.J., Restrepo, J. and Fleishman, R.B. (2014), "Dynamic behavior of rocking and hybrid cantilever walls in a precast concrete building", ACI Struct. J., 111(3), 661-672. https://doi.org/10.14359/51686778
- Belleri, A., Torquati, M., Marini, A. and Riva, P. (2016), "Horizontal cladding panels: in-plane seismic performance in precast concrete buildings", Bull. Earthq. Eng., 14(4), 1103-1129. https://doi.org/10.1007/s10518-015-9861-8
- Biondini, F. and Toniolo, G. (2009), "Probabilistic calibration and experimental validation of the seismic design criteria for onestorey concrete frames", J. Earthq. Eng., 13, 426-462. https://doi.org/10.1080/13632460802598610
- Biondini, F., Dal Lago, B. and Toniolo, G. (2013), "Role of wall panel connections on the seismic performance of precast structures", Bull. Earthq. Eng., 11(4), 1061-1081. https://doi.org/10.1007/s10518-012-9418-z
- Bournas, D., Negro, P. and Taucer, F. (2013b), "Performance of industrial buildings during the Emilia earthquakes in Northern Italy and recommendations for their strengthening", Bull. Earthq. Eng., 12(5), 2383-2404. https://doi.org/10.1007/s10518-013-9466-z
- Bournas, D.A., Negro, P. and Molina, F.J. (2013a), "Pseudodynamic Tests on a full-scale 3-storey precast concrete building: behaviour of the mechanical connections and floor diaphragms", Eng. Struct., 57, 609-627. https://doi.org/10.1016/j.engstruct.2013.05.046
- Brunesi, E., Nascimbene, R., Bolognini, D. and Bellotti, D. (2015a), "Experimental investigation of the cyclic response of reinforced precast concrete frames structures", PCI J., 2, 57-79.
- Brunesi, E., Nascimbene, R., Deyanova, M., Pagani, C. and Zambelli, S. (2015b), "Numerical simulation of hollow steel profiles for lightweight concrete sandwich panels", Comput. Concrete, 15(6), 951-972. https://doi.org/10.12989/cac.2015.15.6.951
- Buratti, N., Minghini, F., Ongaretto, E., Savoia, M. and Tullini, N. (2017), "Empirical seismic fragility for the precast RC industrial buildings damaged by the 2012 Emilia (Italy) earthquakes", Earthq. Eng. Struct. Dyn., 46(14), 2317-2335. https://doi.org/10.1002/eqe.2906
- Cohen, J.M. and Powell, G.H. (1993). "A design study of an energy dissipating cladding system", Earthq. Eng. Struct. Dyn., 22(7), 617-632. https://doi.org/10.1002/eqe.4290220706
- Dal Lago, B. (2015), "Seismic performance of precast structures with dissipative cladding panel connections", Ph.D. Dissertation, Politecnico di Milano, Italy.
- Dal Lago, B. and Ferrara, L. (2018), "Efficacy of roof-to-beam mechanical connections on the diaphragm behaviour of precast decks with spaced roof elements", Eng. Struct., 176, 681-696. https://doi.org/10.1016/j.engstruct.2018.09.027
- Dal Lago, B. and Lamperti Tornaghi, M. (2018), "Sliding channel cladding connections for precast structures subjected to earthquake action", Bull. Earthq. Eng., 16(11), 5621-5646. https://doi.org/10.1007/s10518-018-0410-0
- Dal Lago, B. and Molina, F.J. (2018), "Assessment of a capacity spectrum design approach against cyclic and seismic experiments on full-scale precast RC structures", Earthq. Eng. Struct. Dyn., 47(7), 1591-1609. https://doi.org/10.1002/eqe.3030
- Dal Lago, B., Bianchi, S. and Biondini, F. (2018a), "Diaphragm effectiveness of precast concrete structures with cladding panels under seismic action", Bull. Earthq. Eng., 17(1), 473-495. https://doi.org/10.1007/s10518-018-0452-3
- Dal Lago, B., Biondini, F. and Toniolo, G. (2017a), "Frictionbased dissipative devices for precast concrete panels", Eng. Struct., 147, 356-371. https://doi.org/10.1016/j.engstruct.2017.05.050
- Dal Lago, B., Biondini, F. and Toniolo, G. (2018b), "Experimental investigation on steel W-shaped folded plate dissipative connectors for precast cladding panels", J. Earthq. Eng., 22(5), 778-800. https://doi.org/10.1080/13632469.2016.1264333
- Dal Lago, B., Biondini, F. and Toniolo, G. (2018c), "Experimental tests on multiple-slit devices for precast concrete panels", Eng. Struct., 167, 420-430. https://doi.org/10.1016/j.engstruct.2018.04.035
- Dal Lago, B., Biondini, F. and Toniolo, G. (2018d), "Seismic performance of precast concrete structures with energy dissipating cladding panel connection systems", Struct. Concrete, 19, 1908-1926. https://doi.org/10.1002/suco.201700233
- Dal Lago, B., Biondini, F., Toniolo, G. and Lamperti Tornaghi, M. (2017b), "Experimental investigation on the influence of silicone sealant on the seismic behaviour of precast facades", Bull. Earthq. Eng., 15(4), 1771-1787. https://doi.org/10.1007/s10518-016-0045-y
- Dal Lago, B., Negro, P. and Dal Lago, A. (2018e), "Seismic design and performance of dry-assembled precast structures with adaptable joints", Soil Dyn. Earthq. Eng., 106, 182-195. https://doi.org/10.1016/j.soildyn.2017.12.016
- Dal Lago, B., Toniolo, G. and Lamperti Tornaghi, M. (2016), "Influence of different mechanical column-foundation connection devices on the seismic behaviour of precast structures", Bull. Earthq. Eng., 14(12), 3485-3508. https://doi.org/10.1007/s10518-016-0010-9
- EN 1991-1:2004 (2004), Eurocode 1: Actions on Structures. Part 1: General Actions, European Committee for Standardization, Brussels, Belgium.
- EN 1992-1-1:2005 (2005), Eurocode 2: Design of Concrete Structures. Part 1-1: General Rules and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
- EN 1998-1:2004 (2004), Eurocode 8: Design of Structures for Earthquake Resistance. Part 1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
- fib (2010), Model Code for Concrete Structures, Federation Internationale du Beton/International Federation for Structural Concrete, Lausanne, Switzerland.
- Fischinger, M., Kramar, M. and Isakovic, T. (2008), "Cyclic response of slender RC columns typical of precast industrial buildings", Bull. Earthq. Eng., 6(3), 519-534. https://doi.org/10.1007/s10518-008-9064-7
- Fleischman, R.B., Sause, R., Pessiki, S. and Rhodes, A.B. (1998). "Seismic behavior of precast parking structure diaphragms", PCI J., 43(1), 38-53. https://doi.org/10.15554/pcij.01011998.38.53
- G+D Computing (2010), Using Strand7 (Straus7) - Introduction to the Strand7 finite element analysis system, Ed. 3, Strand7 Pty Limited, Sidney, Australia.
- Gaiotti, R. and Smith, B.S. (1992), "Stiffening of momentresisting frame by precast concrete cladding", PCI J., 37(5), 80-92. https://doi.org/10.15554/pcij.09011992.80.92
- Ghosh, S.K. and Cleland, N. (2012), "Observations from the February 27, 2010, earthquake in Chile", PCI J., 57(1), 52-75. https://doi.org/10.15554/pcij.01012012.52.75
- Gjelvik, A. (1973), "Interaction between frames and precast panel walls", J. Struct. Div., ASCE, 100(2), 405-426. https://doi.org/10.1061/JSDEAG.0003715
- Henry, R.M. and Roll, F. (1986), "Cladding-frame interaction", J. Struct. Eng., ASCE, 112(4), 815-834. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:4(815)
- Hobelmann, J.P., Schachter, M. and Cooper, M.C. (2012), "Architectural precast concrete panel systems used for lateralforce resistance", PCI J., 57(1), 124-134. https://doi.org/10.15554/pcij.01012012.124.134
- Magliulo, G., Bellotti, D., Cimmino, M. and Nascimbene, R. (2018), "Modeling and seismic response analysis of RC precast Italian code-conforming buildings", J. Earthq. Eng., 22(2), 140-167. https://doi.org/10.1080/13632469.2018.1531093
- Magliulo, G., Ercolino, M. and Manfredi, G. (2014a), "Influence of cladding panels on the first period of one-story precast buildings", Bull. Earthq. Eng., 13(5), 1531-1555. https://doi.org/10.1007/s10518-014-9657-2
- Magliulo, G., Ercolino, M., Petrone, C., Coppola, O. and Manfredi, G. (2014b), "Emilia earthquake: the sesmic performance of precast RC buildings", Earthq. Spectra, 30(2), 891-912. https://doi.org/10.1193/091012EQS285M
- Metelli, G., Bettini, N. and Plizzari, G. (2011), "Experimental and numerical studies on the behaviour of concrete sandwich panels", Eur. J. Environ. Civil Eng., 15(10), 1465-1481. https://doi.org/10.1080/19648189.2011.9723354
- Molina, F.J., Marazzi, F., Viaccoz, B. and Bosi, A. (2013), "Stability and accuracy in hybrid test example", Earthq. Eng. Struct. Dyn., 42(3), 469-475. https://doi.org/10.1002/eqe.2206
- Negro, P. and Lamperti Tornaghi, M. (2017), "Seismic response of precast structures with vertical cladding panels: the SAFECLADDING experimental campaign", Eng. Struct., 132, 205-228. https://doi.org/10.1016/j.engstruct.2016.11.020
- Negro, P., Bournas, D.A. and Molina, F.J. (2013), "Pseudodynamic Tests on a full-scale 3-storey precast concrete building: global response", Eng. Struct., 57, 594-608. https://doi.org/10.1016/j.engstruct.2013.05.047
- Okazaki, T., Nakashima, M., Suita, K. and Matsumiya, T. (2007), "Interaction between cladding and structural frame observed in a full-scale steel building test", Earthq. Eng. Struct. Dyn., 36(1), 35-53. https://doi.org/10.1002/eqe.618
- Palsson, H., Goodno, B.J., Craig, J.I. and Will, K.M. (1984), "Cladding influence on dynamic response of tall buildings", Earthq. Eng. Struct. Dyn., 12(2), 215-228. https://doi.org/10.1002/eqe.4290120206
- Pantoli, E., Hutchinson, T.C., McMullin, K.M., Underwood, G.A. and Hildebrand, M.J. (2016), "Seismic-drift-compatible design of architectural precast concrete cladding: tieback connections and corner joints", PCI J., 61(4), 38-52. https://doi.org/10.15554/pcij.03012016.38.55
- Pecce, M., Ceroni, F., Bibbo, F.A. and De Angelis, A. (2014), "Behaviour of RC buildings with large lightly reinforced walls along the perimeter", Eng. Struct., 73, 39-53. https://doi.org/10.1016/j.engstruct.2014.04.038
- Pinelli, J.P., Craig, J.I., Goodno, B.J. and Hsu, C.C. (1993), "Passive control of building response using energy dissipating cladding connections", Earthq. Spectra, 9(3), 529-546. https://doi.org/10.1193/1.1585728
- Pinelli, J.P., Moore, C., Craig, J.I. and Goodno, B.J. (1992), "Experimental testing of ductile cladding connections for building facades", Struct. Des. Tall Spec. Build., 1(1), 57-72. https://doi.org/10.1002/tal.4320010106
- Pinelli, J.P., Moore, C., Craig, J.I. and Goodno, B.J. (1996), "Testing of energy dissipating cladding connections", Earthq. Eng. Struct. Dyn., 25(2), 129-147. https://doi.org/10.1002/(SICI)1096-9845(199602)25:2<129::AID-EQE542>3.0.CO;2-0
- Psycharis, I.N., Kalyviotis, I.M. and Mouzakis, H.P. (2018), "Experimental investigation of the response of precast concrete cladding panels with integrated connections under monotonic and cyclic loading", Eng. Struct., 159, 75-88. https://doi.org/10.1016/j.engstruct.2017.12.036
- Sargin, M. and Handa, V.K. (1969), "A general formulation for the stress-strain properties of concrete", Solid Mech. Div., 3, 1-27.
- Savoia, M., Buratti, N. and Vincenzi, L. (2017), "Damage and collapses in industrial precast buildings after the 2012 Emilia earthquake", Eng. Struct., 137, 162-180. https://doi.org/10.1016/j.engstruct.2017.01.059
- Scotta, R., De Stefani, L. and Vitaliani, R. (2015), "Passive control of precast building response using cladding panels as dissipative shear walls", Bull. Earthq. Eng., 13, 3527-3552. https://doi.org/10.1007/s10518-015-9763-9
- Takeda, T., Sozen, M.A. and Nielsen, N.N. (1970), "Reinforced concrete response to simulated earthquakes", J. Struct. Div., ASCE, 96(12), 2557-2573. https://doi.org/10.1061/JSDEAG.0002765
- Toniolo, G. and Colombo, A. (2012), "Precast concrete structures: the lesson learnt from L'Aquila earthquake", Struct. Concrete, 13(2), 73-83. https://doi.org/10.1002/suco.201100052
- Toniolo, G. and Dal Lago, B. (2017), "Conceptual design and fullscale experimentation of cladding panel connection systems of precast buildings", Earthq Eng. Struct. Dyn., 46(14), 2565-2586. https://doi.org/10.1002/eqe.2918
- Wang, M.L. (1987), "Cladding performance on a full scale test frame", Earthq. Spectra, 3(1), 119-173. https://doi.org/10.1193/1.1585423
- Yuksel, E., Karadogan, F., Ozkaynak, H., Khajehdei, A., Gullu, A., Smyrou, E. and Bal, I.E. (2018), "Behaviour of steel cushions subjected to combined actions", Bull. Earthq. Eng., 16(2), 707-729. https://doi.org/10.1007/s10518-017-0217-4
- Zoubek, B., Fischinger, M. and Isakovic, T. (2016), "Cyclic response of hammer-head strap cladding-to-structure connections used in RC precast buildings", Eng. Struct., 119, 135-148. https://doi.org/10.1016/j.engstruct.2016.04.002
- Zoubek, B., Fischinger, M. and Isakovic, T. (2018), "Seismic response of short restrainers used to protect cladding panels in RC precast buildings", J. Vib. Control, 24(4), 645-658. https://doi.org/10.1177/1077546316659780
Cited by
- Multi-Stripe Seismic Assessment of Precast Industrial Buildings With Cladding Panels vol.7, 2019, https://doi.org/10.3389/fbuil.2021.631360