References
- Alzubaidi, R. (2015), "A new method for interpreting pressuremeter data to estimate in situ horizontal stress", Arab. J. Geosci., 8(7), 5295-5302. https://doi.org/10.1007/s12517-014-1532-6
- Dyka, I. (2012), "Use of laboratory tests of soil modulus in modeling pile behavior", Stud. Geotech. Mech., 34(3), 53-61. https://doi.org/10.2478/sgm031204
- Farid, M., Abdelkader, H. and Salah, L.M. (2013), "Analysis of correlations between cone penetrometer and pencel pressuremeter parameters", Proc. Eng., 54, 505-515. https://doi.org/10.1016/j.proeng.2013.03.046
- Fawaz, A., Hagechehade, F. and Farah, E. (2014), "A study of the pressuremeter modulus and its comparison to the elastic modulus of soil", Stud. Civ. Eng. Arch., 3, 7-15.
- Gibson, R. and Anderson, W. (1961), "In-situ measurement of soils properties with the pressuremeter", Civ. Eng. Publ. Work. Rev., 56(658), 615-618.
- Komurlu, E., Kesimal, A. and Hasanpour, R. (2015), "In situ horizontal stress effect on plastic zone around circular underground openings excavated in elastic zones", Geomech. Eng., 8(6), 783-799. https://doi.org/10.12989/gae.2015.8.6.783
- Kurlenya, M.V., Serdyukov, S.V. and Patutin, A.V. (2015), "Assessment of deformation properties of rocks by pressuremeter testing in hydrofractured interval", J. Min. Sci., 51(4), 718-723. https://doi.org/10.1134/S106273911504008X
- Likitlersuang, S., Surarak, C., Wanatowski, D., Oh, E. and Balasubramaniam, A. (2013) "Geotechnical parameters from pressuremeter tests for MRT Blue Line extension in Bangkok", Geomech. Eng., 5(2), 99-118. https://doi.org/10.12989/gae.2013.5.2.099
- Marcil, L., Sedran, G. and Failmezger, R. (2015), "Values of presssuremeter modulus and limit pressure inferred from stress or strain controlled PMT testing", Proceedings of the 7th International Symposium on Pressuremeters, Hamammet, Tunsia.
- Menard, L. (1957), Mesures in situ des Proprietes Physiques des Sols, 357-376
- Miller, G., Tan, N. and Muraleetharan, K. (2012), "Influence of matric duction on pressuremeter modulus", Proceedings of the GeoCongress 2012: State of the Art and Practice in Geotechnical Engineering, Oakland, California, U.S.A., March.
- Oztoprak, S., Sargin, S.K., Uyar, H. and Bozbey, I. (2018), "Modeling of pressuremeter tests to characterize the sands", Geomech. Eng., 14(6), 509-517 https://doi.org/10.12989/GAE.2018.14.6.509
- Palmer, A.C. (1972), "Undrained plane-strain expansion of cylindrical cavity in clay; Simple nterpretation of pressuremeter test", Geotechnique, 22(3), 451-457. https://doi.org/10.1680/geot.1972.22.3.451
- Vincent, S. and Maxime, S. (2016), "Stress path during pressuremeter test and link between shear modulus and Menard pressuremeter modulus in unsaturated fine soils", Proceedings of the 3rd European Conference on Unsaturated Soil, Paris, France, September.