초록
유속의 크기와 블레이드의 기하학적 형상 변화에 따라 발생하는 조류발전용 쉬라우드 시스템 내 유속 변화를 분석하기 위하여 수리모형실험과 수치해석적 방법을 이용하였다. 모형실험을 통해 시스템의 유입부에서 유속 변화와 블레이드 형상변화에 따른 고유 회전수를 계측하였으며, 수치해석을 통해 쉬라우드내 유속 변화를 분석하였다. 실험 유속이 약 28% 증가하고, 익형의 형상을 적용하였을 때, 쉬라우드 유입부에서 계측된 유속은 최대 약 56% 증가하는 경향을 보였다. 한편, 익형 형상을 적용한 블레이드가 설치된 경우 유입부에서의 유속은 일반 블레이드에 비해 최대 14% 증가하는 경향을 보였으며, 회전수 역시 동일 조건에서 가장 높은 수치를 보였다. 수리실험과 수치해석 결과는 약 13%의 오차를 보였으며, 각각의 결과에서 보이는 유속 변화에 대한 경향은 유사하다. 쉬라우드 내 유속 변화를 수치해석으로 분석한 결과 유입부 대비 블레이드 앞부분에서 유속은 최대 1.7배 증가하는 경향을 보였다. 본 연구를 통해 얻은 시스템 내 유속 변화 분석 결과는 효율적인 조류발전용 쉬라우드 시스템 개발에 필요한 기초 자료를 제시할 수 있을 것으로 판단된다.
Flow velocity changes in the shroud system for tidal current power generation due to experimental flow velocities and blade geometry changes were analyzed by hydraulic experiment and numerical simulation. Through the hydraulic experiment, flow velocities at inlet of shroud system and RPM according to blade geometry were measured, and numerical simulation was used to analyze flow velocity changes in shroud. When the experimental flow velocity was increased by about 28% and the shape of the airfoil was applied, the measured flow velocity at the shroud inlet tended to increase by up to about 56%. On the other hand, when airfoil-shaped blades were installed, the flow velocity at the inlet tended to increase by up to 14% compared to conventional blades, and RPM was also the highest at the same conditions. The hydraulic experiment and numerical simulation results showed an error of about 13%, and the trends of the flow velocity changes in each result are similar. Numerical simulation of the flow velocity changes in the shroud showed that the flow velocity tended to increase 1.7 times at the front of the blade compared to the inlet. The results of the flow velocity change analysis in the shroud system obtained from this study will provide the basic data necessary for the development of efficient shroud system for tidal current power generation.