한국재료학회지 (Korean Journal of Materials Research)

  • 제29권2호
  • /
  • Pages.97-105
  • /
  • 2019
  • /
  • 1225-0562(pISSN)
  • /
  • 2287-7258(eISSN)
한국재료학회 (Materials Research Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

고강도 구조용 철강소재의 대입열 용접 시 열영향부의 조직 미세화 및 기계적 특성 향상에 미치는 TiN 및 B의 효과

Effects of TiN and B on Grain Refinement of HAZ Microstructure and Improvement of Mechanical Properties of High-strength Structural Steel Under High Heat Input Welding

  • Park, Jin-seong (Department of Advanced Materials Engineering, Sunchon National University) ;
  • Hwang, Joong-Ki (School of Mechanical Engineering, Tongmyong University) ;
  • Cho, Jae Young (POSCO Technical Research Laboratories) ;
  • Han, Il Wook (POSCO Technical Research Laboratories) ;
  • Lee, Man Jae (Analysis and Assessment Group, Research Institute of Industrial Science and Technology (RIST)) ;
  • Kim, Sung Jin (Department of Advanced Materials Engineering, Sunchon National University)
  • 투고 : 2018.10.30
  • 심사 : 2018.12.24
  • 발행 : 2019.02.27
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In the current steel structures of high-rise buildings, high heat input welding techniques are used to improve productivity in the construction industry. Under the high heat input welding, however, the microstructures of the weld metal (WM) and heat-affected zone (HAZ) coarsen, resulting in the deterioration of impact toughness. This study focuses mainly on the effects of fine TiN precipitates dispersed in steel plates and B addition in welding materials on grain refinement of the HAZ microstructure under submerged arc welding (SAW) with a high heat input of 200 kJ/cm. The study reveals that, different from that in conventional steel, the ${\gamma}$ grain coarsening is notably retarded in the coarse grain HAZ (CGHAZ) of a newly developed steel with TiN precipitates below 70 nm in size even under the high heat input welding, and the refinement of HAZ microstructure is confirmed to have improved impact toughness. Furthermore, energy dispersive spectroscopy (EDS) and secondary-ion mass spectrometry (SIMS) analyses demonstrate that B is was identified at the interface of TiN in CGHAZ. It is likely that B atoms in the WM are diffused to CGHAZ and are segregated at the outer part of undissolved TiN, which contributes partly to a further grain refinement, and consequently, improved mechanical properties are achieved.

키워드

참고문헌

  1. S. J. Kim and H. C. Jeong, J. Weld. Join., 34, 7 (2016). https://doi.org/10.5781/JWJ.2016.34.1.7
  2. G. B. An, I. W. Han, J. G. Park and W. C. Woo, J. Weld. Join., 35, 15 (2017).
  3. J. U. Park, G. B. An and W. C. Woo, J. Weld. Join., 34, 16 (2016).
  4. X. Zhang, G. Mi, L. Chen, P. Jiang, X. Shao and C. Wang, J. Mater. Process. Tech., 259, 312 (2018). https://doi.org/10.1016/j.jmatprotec.2018.05.005
  5. W. Woo, G. B. An, E. J. Kingston, A. T. Dewald, D.J. Smith and M. R. Hill, Acta. Mater., 61, 3564 (2013). https://doi.org/10.1016/j.actamat.2013.02.034
  6. C. Liu, J. Yang, Y. Shi, Q. Fu and Y. Zhao, J. Mater. Process. Tech., 256, 239 (2018). https://doi.org/10.1016/j.jmatprotec.2018.02.024
  7. M. Yanet and Z. Monica, Procedia Mater. Sci., 8, 904 (2015). https://doi.org/10.1016/j.mspro.2015.04.151
  8. L. H. S. Barbosa, P. J. Modenesi, L. B. Godefroid and A. R. Arias, Int. J. Fatig., 18, 30571 (2018).
  9. M. Shi, P. Zhang, C. Wang and F. Zhu, ISIJ. Int., 54, 932 (2014). https://doi.org/10.2355/isijinternational.54.932
  10. Y. Tomita, N. Saito, T. Tsuzuki, Y. Tokunaga and K. Okamoto, ISIJ. Int., 34, 829 (1994). https://doi.org/10.2355/isijinternational.34.829
  11. F. Chai, C. Yang, H. Su, Y. Zhang, Z. Xu and Y. Yang, Acta. Metall. Sin., 21, 220 (2008). https://doi.org/10.1016/S1006-7191(08)60042-3
  12. A. Kojima, A. Kiyose, R. Uemori, M. Mingawa, M. Hoshino, T. Nakashima, K. Ishida and H. Yasui, Nippon Steel Technical Report, 90, 2 (2004).
  13. J-H. Shim, Y. W. Cho, S. H. Chung, J-D. Shim and D. N. Lee, Acta Mater., 47, 2751 (1999). https://doi.org/10.1016/S1359-6454(99)00114-7
  14. F. Ishikawa and T. Takahashi, ISIJ. Int., 35, 1128 (1995). https://doi.org/10.2355/isijinternational.35.1128
  15. K. M. Ryu, D. W. Kim, J. W. Lee and H. C. Bang, J. Weld. Join., 35, 27 (2017). https://doi.org/10.5781/JWJ.2017.35.6.5
  16. H. C. Jeong, Y. H. Park, Y. H. An and J. B. Lee, J. Weld. Join., 25, 57-62 (2007).
  17. J. O. Moon and S. J. Park, J. Weld. Join., 33, 31 (2015). https://doi.org/10.5781/JWJ.2015.33.5.31
  18. T. Saunders, P. Tatarko, S. Grasso and M. J. Reece, J. Euro. Cera. Soc., 38, 4198 (2018). https://doi.org/10.1016/j.jeurceramsoc.2018.04.059
  19. Y. Cai, Z. Luo, Z. Huang and Y. Zeng, J. Mater. Process. Tech., 230, 80 (2016). https://doi.org/10.1016/j.jmatprotec.2015.11.008
  20. Y. L. Gao, X. X. Xue and H. Yang, Crystlas, 5, 592 (2015). https://doi.org/10.3390/cryst5040592
  21. E. E. Kashif, K. Asakura, T. Koseki and K. Shibata, ISIJ. Int., 44, 1568 (2004). https://doi.org/10.2355/isijinternational.44.1568
  22. B. Subramanian and M. Jayachandran, Mater. Lett., 62, 1727 (2008). https://doi.org/10.1016/j.matlet.2007.09.072
  23. T. Yamashita, J. Shimamura, K. Oi, M. Nagoshi, K. Oikawa and K. Ishida, ISIJ. Int., 55, 2018 (2015). https://doi.org/10.2355/isijinternational.ISIJINT-2015-033
  24. H. Tamura, J. Jpn. Weld. Soc., 35, 710 (1966). https://doi.org/10.2207/qjjws1943.35.8_710
  25. N. Fujiyama, T. Nishibata, A. Seki, H. Hirata, K. Kojima and K. Ogawa, Sci. Tech. Adv. Mater., 18, 88 (2016). https://doi.org/10.1080/14686996.2016.1244473
  26. J. K. Choi, Development of high strength and high performance steels at POSCO through hipers-21 Project, Phase Transformations Web. Retrieved 2005 from https://www.phase-trans.msm.cam.ac.uk
  27. Y. J. Kang, G. T. Park, S. H. Jeong and C. H. Lee, J. Weld. Join., 35, 21 (2017).
  28. J. S. Kim, K. T. Park, D. Lee and C. S. Lee, Korean J. Met. Mater., 45, 506 (2007).
  29. G. T. Park, S. U. Koh, H. G. Jung and K. Y. Kim, Corrosion Sci., 50, 1865 (2008). https://doi.org/10.1016/j.corsci.2008.03.007
  30. H. Hagi, Mater. Trans., 35, 168 (1994). https://doi.org/10.2320/matertrans1989.35.168
  31. G. W. Hong and J. Y. Lee, J. Mater. Sci., 18, 271 (1983). https://doi.org/10.1007/BF00543835
  32. G. W. Hong and J. Y. Lee, Metall. Trans. A, 14, 156 (1983). https://doi.org/10.1007/BF02643751
  33. H. K. D. H. Bahadeshia, ISIJ. Int., 56, 24 (2016). https://doi.org/10.2355/isijinternational.ISIJINT-2015-430
  34. D. G. Enos and J. R. Scully, Metall. Mater. Trans. A, 33, 1151 (2002). https://doi.org/10.1007/s11661-002-0217-z