Advances in concrete construction

  • 제7권1호
  • /
  • Pages.31-37
  • /
  • 2019
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Performance of self-compacting concrete at room and after elevated temperature incorporating Silica fume

  • Ahmad, Subhan (Department of Civil Engineering, Aligarh Muslim University) ;
  • Umar, Arshad (Department of Civil Engineering, Aligarh Muslim University) ;
  • Masood, Amjad (Department of Civil Engineering, Aligarh Muslim University) ;
  • Nayeem, Mohammad (Department of Civil Engineering, Aligarh Muslim University)
  • 투고 : 2017.12.30
  • 심사 : 2018.12.26
  • 발행 : 2019.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper evaluates the workability and hardened properties of self-compacting concrete (SCC) containing silica fume as the partial replacement of cement. SCC mixtures with 0, 2, 4, 6, 8 and 10% silica fume were tested for fresh and hardened properties. Slump flow with $T_{500}$ time, L-box and V-funnel tests were performed for evaluating the workability properties of SCC mixtures. Compressive strength, splitting tensile strength and modulus of rupture were performed on hardened SCC mixtures. Experiments revealed that replacement of cement by silica fume equal to and more than 4% reduced the slump flow diameter and increased the $T_{500}$ and V-funnel time linearly. Compressive strength, splitting tensile strength and modulus of rupture increased with increasing the replacement level of cement by silica fume and were found to be maximum for SCC mixture with 10% silica fume. Further, residual hardened properties of SCC mixture yielding maximum strengths (i.e., SCC with 10% silica fume) were determined experimentally after heating the concrete samples up to 200, 400, 600 and $800^{\circ}C$. Reductions in hardened properties up to $200^{\circ}C$ were found to be very close to normal vibrated concrete (NVC). For 400 and $600^{\circ}C$ reductions in hardened properties of SCC were found to be more than NVC of the same strength. Explosive spalling occurred in concrete specimens before reaching $800^{\circ}C$.

키워드

참고문헌

  1. ACI Committee 234 (1995), "Guide for the use of silica fume in concrete (ACI 234R)", ACI Mater. J., 92(4), 437-440
  2. Admixture, Water-Reducing, ASTM C 494/C 494M, Type B 3.
  3. Ahmad, S. and Umar, A. (2018a), "Influence of glass and polyvinyl alcohol fibres on properties of self-compacting concrete", Jordan J. Civil Eng., 12(2), 333-344
  4. Ahmad, S. and Umar, A. (2018b), "Rheological and mechanical properties of self-compacting concrete with glass and polyvinyl alcohol fibres", J. Build. Eng., 17, 65-74. https://doi.org/10.1016/j.jobe.2018.02.002
  5. Ahmad, S., Bhargava, P. and Chourasia, A. (2018), "Shear transfer capacity of reinforced concrete exposed to fire", IOP Conference Series: Earth and Environmental Science, 140(1), 012146. https://doi.org/10.1088/1755-1315/140/1/012146
  6. Almusallam, A.A., Beshr, H., Maslehuddin, M. and Al-Amoudi, O.S. (2004), "Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete", Cement Concrete Compos., 26(7), 891-900. https://doi.org/10.1016/j.cemconcomp.2003.09.003
  7. American Concrete Institute, ACI Committee 318 (2005), Building Code Requirements for Structural Concrete, Farmington Hills, MI, American Concrete Institute.
  8. ASTM C1240-14, Standard Specification for Silica Fume Used in Cementitious Mixtures.
  9. Bazant, Z.P., Kaplan, M.F. and Bazant, Z.P. (1996), Concrete at High Temperatures: Material Properties and Mathematical Models, Longman.
  10. Bhanja, S. and Sengupta, B. (2005), "Influence of silica fume on the tensile strength of concrete", Cement Concrete Res., 35(4), 743-747. https://doi.org/10.1016/j.cemconres.2004.05.024
  11. British Standards Institution (2004), Eurocode 2: Design of Concrete Structures: Part 1-1: General Rules and Rules for Buildings, British Standards Institution.
  12. BS EN 12350-10 (2010), Testing Fresh Self-Compacting Concrete, L-Box Test
  13. BS EN 12350-8 (2010), Testing Fresh Self-Compacting Concrete, Slump Flow Test
  14. BS EN 12350-9 (2010), Testing Fresh Self-Compacting Concrete, V-Funnel Test.
  15. Chang, Y.F., Chen, Y.H., Sheu, M.S. and Yao, G.C. (2006), "Residual stress-strain relationship for concrete after exposure to high temperatures", Cement Concrete Res., 36(10), 1999-2005. https://doi.org/10.1016/j.cemconres.2006.05.029
  16. Dinakar, P., Babu, K.G. and Santhanam, M. (2008), "Mechanical properties of high-volume fly ash self-compacting concrete mixtures", Struct. Concrete, 9(2), 109-116. https://doi.org/10.1680/stco.2008.9.2.109
  17. EFNARC (2005), Specification and Guidelines for Self-Compacting Concrete.
  18. Eurocode 4 (1994), Design of Composite Steel and Concrete Structures, Part 1-2: General Rules-Structural Fire Design, CEN ENV.
  19. Fares, H., Noumowe, A. and Remond, S. (2009), "Self-consolidating concrete subjected to high temperature: Mechanical and physicochemical properties", Cement Concrete Res., 39(12), 1230-1238. https://doi.org/10.1016/j.cemconres.2009.08.001
  20. Felekoglu, B., Turkel, S. and Baradan, B. (2007), "Effect of water/cement ratio on the fresh and hardened properties of self-compacting concrete", Build. Environ., 42(4), 1795-1802. https://doi.org/10.1016/j.buildenv.2006.01.012
  21. Harada, T., Takeda, J., Yamane, S. and Furumura, F. (1972), "Strength, elasticity and thermal properties of concrete subjected to elevated temperatures", Spec. Pub., 34, 377-406.
  22. IS 5816 (1999), Indian Standard Code of Practice-Method of Test for Splitting Tensile Strength of Concrete, Bureau of Indian Standards, New Delhi, India.
  23. IS: 383-1970, Specifications for Coarse and Fine Aggregates from Natural Sources for Concrete, Bureau of Indian Standards, New Delhi, India
  24. IS: 516-1959, Indian Standard Code of Practice- Methods of Test for Strength of Concrete, Bureau of Indian Standards, New Delhi, India.
  25. IS: 8112-1989, Specifications for 43-Grade Portland Cement, Bureau of Indian Standards, New Delhi, India.
  26. Jalal, M., Mansouri, E., Sharifipour, M. and Pouladkhan, A.R. (2012), "Mechanical, rheological, durability and microstructural properties of high performance self-compacting concrete containing $SiO_{2}$ micro and nanoparticles", Mater. Des., 34, 389-400. https://doi.org/10.1016/j.matdes.2011.08.037
  27. Khayat, K., Hu, C. and Monty, H. (1999), "Stability of self-consolidating concrete, advantages, and potential applications", Self-Compacting Concrete: Proceedings of the First International RILEM Symposium, 143-152).
  28. Lenka, S. and Panda, K.C. (2017), "Effect of metakaolin on the properties of conventional and self compacting concrete", Adv. Concrete Constr., 5(1), 31-48. https://doi.org/10.12989/acc.2017.5.1.31
  29. Mazloom, M., Ramezanianpour, A.A. and Brooks, J.J. (2004), "Effect of silica fume on mechanical properties of high-strength concrete", Cement Concrete Compos., 26(4), 347-357. https://doi.org/10.1016/S0958-9465(03)00017-9
  30. Okamura, H. and Ouchi, M. (2003), "Self-compacting concrete", J. Adv. Concrete Technol., 1(1), 5-15. https://doi.org/10.3151/jact.1.5
  31. Ouchi, M. and Okamura, H. (1999), "Self-compacting concrete development, Present and future", Proceedings of the 1st Int. Symposium on Self-compacting Concrete, RILEM, Sweden.
  32. Park, C.K., Noh, M.H. and Park, T.H. (2005), "Rheological properties of cementitious materials containing mineral admixtures", Cement Concrete Res., 35(5), 842-849. https://doi.org/10.1016/j.cemconres.2004.11.002
  33. Pathak, N. and Siddique, R. (2012), "Properties of self-compacting-concrete containing fly ash subjected to elevated temperatures", Constr. Build. Mater., 30, 274-280. https://doi.org/10.1016/j.conbuildmat.2011.11.010
  34. Sabet, F.A., Libre, N.A. and Shekarchi, M. (2013), "Mechanical and durability properties of self consolidating high performance concrete incorporating natural zeolite, silica fume and fly ash", Constr. Build. Mater., 44, 175-184. https://doi.org/10.1016/j.conbuildmat.2013.02.069
  35. Salhi, M., Ghrici, M., Li, A. and Bilir, T. (2017), "Effect of curing treatments on the material properties of hardened self-compacting concrete", Adv. Concrete Constr., 5(4), 359-375. https://doi.org/10.12989/ACC.2017.5.4.359
  36. Sideris, K.K. (2007), "Mechanical characteristics of self-consolidating concretes exposed to elevated temperatures", J. Mater. Civil Eng., 19(8), 648-654. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:8(648)
  37. Sobolev, K. (2004), "The development of a new method for the proportioning of high-performance concrete mixtures", Cement Concrete Compos., 26(7), 901-907. https://doi.org/10.1016/j.cemconcomp.2003.09.002
  38. Sonebi, M. and Bartos, P.J.M. (1999), "Hardened SCC and its bond with reinforcement", Self-Compacting Concrete: Proceedings of the First International RILEM Symposium, Stockholm, Sweden, September.
  39. Sukumar, B., Nagamani, K. and Raghavan, R.S. (2008), "Evaluation of strength at early ages of self-compacting concrete with high volume fly ash", Constr. Build. Mater., 22(7), 1394-1401. https://doi.org/10.1016/j.conbuildmat.2007.04.005
  40. Yazici, H. (2008), "The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze-thaw resistance of self-compacting concrete", Constr. Build. Mater., 22(4), 456-462. https://doi.org/10.1016/j.conbuildmat.2007.01.002
  41. Yuksel, I., Siddique, R. and O zkan, O . (2011), "Influence of high temperature on the properties of concretes made with industrial by-products as fine aggregate replacement", Constr. Build. Mater., 25(2), 967-972. https://doi.org/10.1016/j.conbuildmat.2010.06.085

피인용 문헌

  1. Effect of Review elevated temperature on geo-polymer concrete - A Review vol.184, 2019, https://doi.org/10.1051/e3sconf/202018401090
  2. Prediction Models for the Mechanical Properties of Self-Compacting Concrete with Recycled Rubber and Silica Fume vol.13, pp.8, 2019, https://doi.org/10.3390/ma13081821
  3. Waste glass powder and its effect on the fresh and mechanical properties of concrete: A state of the art review vol.10, pp.5, 2019, https://doi.org/10.12989/acc.2020.10.5.417
  4. Effect of cement as mineral filler on the performance development of emulsified asphalt concrete vol.10, pp.6, 2019, https://doi.org/10.12989/acc.2020.10.6.515
  5. Effect of sulfate activators on mechanical property of high replacement low-calcium ultrafine fly ash blended cement paste vol.11, pp.3, 2019, https://doi.org/10.12989/acc.2021.11.3.183
  6. Combining internal and external curing to improve quality of self-compacting concrete with consideration of climate effects vol.12, pp.2, 2021, https://doi.org/10.12989/acc.2021.12.2.085
  7. Prediction of the Tensile Strength of Normal and Steel Fiber Reinforced Concrete Exposed to High Temperatures vol.15, pp.1, 2021, https://doi.org/10.1186/s40069-021-00485-6