Advances in concrete construction

  • 제7권1호
  • /
  • Pages.11-22
  • /
  • 2019
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Numerical simulation approach for structural capacity of corroded reinforced concrete bridge

  • Zhou, Xuhong (Key Laboratory of New Technology for Construction of Cities in Mountain Area, Chongqing University, Ministry of Education) ;
  • Tu, Xi (Key Laboratory of New Technology for Construction of Cities in Mountain Area, Chongqing University, Ministry of Education) ;
  • Chen, Airong (Department of Bridge Engineering, Tongji University) ;
  • Wang, Yuqian (China-Road Transportation Verification & Inspection Hi-Tech Co. Ltd.)
  • 투고 : 2018.08.21
  • 심사 : 2018.12.15
  • 발행 : 2019.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

A comprehensive assessing approach for durability of reinforced concrete structures dealing with the corrosion process of rebar subjected to the attack of aggressive agent from environment was proposed in this paper. Corrosion of rebar was suggested in the form of combination of global corrosion and pitting. Firstly, for the purposed of considering the influence of rebar's radius, a type of Plane Corrosion Model (PCM) based on uniform corrosion of rebar was introduced. By means of FE simulation approach, global corrosion process of rebar regarding PCM and LCM (Linear Corrosion Model) was regressed and compared according to the data from Laboratoire $Mat{\acute{e}}riaux$ et $Durabilit{\acute{e}}$ des Constructions (LMDC). Secondly, pitting factor model of rebar in general descend law with corrosion degree was introduced in terms of existing experimental data. Finally, with the comprehensive numerical simulation, the durability of an existing arch bridge was studied in depth in deterministic way, including diffusion process and sectional strength of typical cross section of arch, crossbeam and deck slab. Evolution of structural capacity considering life-cycle rehabilitation strategy indicated the degradation law of durability of reinforced arch bridges.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Central Universities

참고문헌

  1. Ascione, L., Berardi, V.P., Feo, L. and Mancusi, G. (2005), "A numerical evaluation of the interlaminar stress state in externally FRP plated RC beams", Compos. Part B-Eng., 36(1), 83-90.
  2. Bastidas-Arteaga, E., Chateauneuf, A., Sanchez-Silva, M., Bressolette, P. and Schoefs, F. (2011), "A comprehensive probabilistic model of chloride ingress in unsaturated concrete", Eng. Struct., 33(3), 720-730. https://doi.org/10.1016/j.engstruct.2010.11.008
  3. Biondini, F., Bontempi, F., Frangopol, D.M. and Malerba, P.G. (2004), "Cellular automata approach to durability analysis of concrete structures in aggressive environments", J. Struct. Eng., 130(11), 1724-1737. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:11(1724)
  4. Biondini, F., Bontempi, F., Frangopol, D.M. and Malerba, P.G. (2006), "Probabilistic service life assessment and maintenance planning of concrete structures", J. Struct. Eng., ASCE, 132(5), 810-825. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:5(810)
  5. Biondini, F. and Vergani, M. (2012), "Damage modeling and nonlinear analysis of concrete bridges under corrosion", Bridge Mainten. Saf. Manage. Resi. Sustain., 949-957.
  6. Cairns, J., Plizzari, G.A., Du, Y.G., Law, D.W. and Franzoni, C. (2005), "Mechanical properties of corrosion-damaged reinforcement", ACI Mater. J., 102(4), 256-264.
  7. Castel, A., Francois, R. and Arliguie, G. (2000), "Mechanical behaviour of corroded reinforced concrete beams-Part 1: Experimental study of corroded beams", Mater. Struct., 33(233), 539-544. https://doi.org/10.1007/BF02480533
  8. Chen, A., Wang, Y., Wu, H. and Ruan, X. (2010), "Design service life determination for bridge structural elements", J. Tongji Univ. (Nat. Sci.), 3, 317-322.
  9. Coronelli, D. and Gambarova, P. (2004), "Structural assessment of corroded reinforced concrete beams: Modeling guidelines", J. Struct. Eng., ASCE, 130(8), 1214-1224. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1214)
  10. Gonzalez, J.A. andrade, C., Alonso, C. and Feliu, S. (1995), "Comparison of rates of general corrosion and maximum pitting penetration on concrete embedded steel reinforcement", Cement Concrete Res., 25(2), 257-264. https://doi.org/10.1016/0008-8846(95)00006-2
  11. Liu, T. and Weyers, R.W. (1998), "Modeling the dynamic corrosion process in chloride contaminated concrete structures", Cement Concrete Res., 28(3), 365-379. https://doi.org/10.1016/S0008-8846(98)00259-2
  12. Marti'n-Perez, B., Zibara, H., Hooton, R.D. and Thomas, M.D.A. (2000), "A study of the effect of chloride binding on service life predictions", Cement Concrete Res., 30(8), 1215-1223. https://doi.org/10.1016/S0008-8846(00)00339-2
  13. Papadakis, V.G. (2013), "Service life prediction of a reinforced concrete bridge exposed to chloride induced deterioration", Adv. Concrete Constr., 1(3), 201-213. https://doi.org/10.12989/acc2013.1.3.201
  14. Roberge, P.R. (2008). Corrosion Engineering Principles and Practice, McGraw-Hill Education.
  15. Rodriguez, J., Ortega, L.M. and Casal, J. (1997), "Load carrying capacity of concrete structures with corroded reinforcement", Constr. Build. Mater., 11(4), 239-248. https://doi.org/10.1016/S0950-0618(97)00043-3
  16. Sanchez, P.J., Huespe, A.E., Oliver, J. and Toro, S. (2010), "Mesoscopic model to simulate the mechanical behavior of reinforced concrete members affected by corrosion", Int. J. Solid. Struct., 47(5), 559-570. https://doi.org/10.1016/j.ijsolstr.2009.10.023
  17. Stewart, M.G. and Al-Harthy, A. (2008), "Pitting corrosion and structural reliability of corroding RC structures: Experimental data and probabilistic analysis", Reliab. Eng. Syst. Saf., 93(3), 373-382. https://doi.org/10.1016/j.ress.2006.12.013
  18. Thoft-Christensen, P. (2002), "Stochastic modelling of the diffusion coefficient for concrete", Department of Building Technology and Structural Engineering, Aalborg University, Aalborg.
  19. Torres-Acosta Andres, A. and Martinez-Madrid, M. (2003), "Residual life of corroding reinforced concrete structures in marine environment", J. Mater. Civil Eng., 15(4), 344-353. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:4(344)
  20. Vidal, T., Castel, A. and Francois, R. (2004), "Analyzing crack width to predict corrosion in reinforced concrete", Cement Concrete Res., 34(1), 165-174. https://doi.org/10.1016/S0008-8846(03)00246-1
  21. Vidal, T., Castel, A. and Francois, R. (2007), "Corrosion process and structural performance of a 17 year old reinforced concrete beam stored in chloride environment", Cement Concrete Res., 37(11), 1551-1561. https://doi.org/10.1016/j.cemconres.2007.08.004
  22. Xu, J. and Chen, W. (2013), "Behavior of wires in parallel wire stayed cable under general corrosion effects", J. Constr. Steel Res., 85, 40-47. https://doi.org/10.1016/j.jcsr.2013.02.010
  23. Yu, L., Francois, R., Dang, V.H., L'Hostis, V. and Gagne, R. (2015), "Distribution of corrosion and pitting factor of steel in corroded RC beams", Constr. Build. Mater., 95, 384-392. https://doi.org/10.1016/j.conbuildmat.2015.07.119
  24. Yuan, Q., Shi, C., De Schutter, G., Audenaert, K. and Deng, D. (2009), "Chloride binding of cement-based materials subjected to external chloride environment-A review", Constr. Build. Mater., 23(1), 1-13. https://doi.org/10.1016/j.conbuildmat.2008.02.004
  25. Zhang, R., Castel, A. and Francois, R. (2009), "The corrosion pattern of reinforcement and its influence on serviceability of reinforced concrete members in chloride environment", Cement Concrete Res., 39(11), 1077-1086. https://doi.org/10.1016/j.cemconres.2009.07.025
  26. Zhang, R., Castel, A. and Francois, R. (2009), "Serviceability Limit State criteria based on steel-concrete bond loss for corroded reinforced concrete in chloride environment", Mater. Struct., 42(10), 1407. https://doi.org/10.1617/s11527-008-9460-0
  27. Zhang, R., Castel, A. and Francois, R. (2010), "Concrete cover cracking with reinforcement corrosion of RC beam during chloride-induced corrosion process", Cement Concrete Res., 40(3), 415-425. https://doi.org/10.1016/j.cemconres.2009.09.026
  28. Zhang, Z. and Zhang, Q. (2017), "Self-healing ability of Engineered Cementitious Composites (ECC) under different exposure environments", Constr. Build. Mater., 156, 142-151. https://doi.org/10.1016/j.conbuildmat.2017.08.166
  29. Zhao, Y., Gao, X., Xu, C. and Jin, W. (2009), "Concrete surface chloride ion concentration varying with seasons in marine environment (Chinese)", J. Zhejiang Univ. (Eng. Sci.), 43(11), 2120-2124.
  30. Zhu, W. and Francois, R. (2013), "Effect of corrosion pattern on the ductility of tensile reinforcement extracted from a 26-year-old corroded beam", Adv. Concrete Constr., 1(2), 121-136. https://doi.org/10.12989/acc2013.01.2.121
  31. Zhu, W. and Francois, R. (2015), "Structural performance of RC beams in relation with the corroded period in chloride environment", Mater. Struct., 48(6), 1757-1769. https://doi.org/10.1617/s11527-014-0270-2
  32. Zhu, W., Francois, R., Fang, Q. and Zhang, D. (2016), "Influence of long-term chloride diffusion in concrete and the resulting corrosion of reinforcement on the serviceability of RC beams", Cement Concrete Compos., 71, 144-152. https://doi.org/10.1016/j.cemconcomp.2016.05.003
  33. Zhu, W., Francois, R., Poon, C.S. and Dai, J.G. (2017), "Influences of corrosion degree and corrosion morphology on the ductility of steel reinforcement", Constr. Build. Mater., 148, 297-306. https://doi.org/10.1016/j.conbuildmat.2017.05.079

피인용 문헌

  1. Algorithms to measure carbonation depth in concrete structures sprayed with a phenolphthalein solution vol.9, pp.3, 2019, https://doi.org/10.12989/acc.2020.9.3.257
  2. Investigation on compression properties of seawater-sea sand concrete vol.12, pp.2, 2019, https://doi.org/10.12989/acc.2021.12.2.093