Structural Engineering and Mechanics

  • 제69권4호
  • /
  • Pages.417-426
  • /
  • 2019
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Study of buckling stability of cracked plates under uniaxial compression using singular FEM

  • Saberi, Sina (Department of Civil Engineering, Najafabad Branch, Islamic Azad University) ;
  • Memarzadeh, Parham (Department of Civil Engineering, Najafabad Branch, Islamic Azad University) ;
  • Zirakian, Tadeh (Department of Civil Engineering and Construction Management, California State University)
  • 투고 : 2018.07.17
  • 심사 : 2019.01.13
  • 발행 : 2019.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

Buckling is one of the major causes of failure in thin-walled plate members and the presence of cracks with different lengths and locations in such structures may adversely affect this phenomenon. This study focuses on the buckling stability assessment of centrally and non-centrally cracked plates with small-, intermediate-, and large-size cracks, and different aspect ratios as well as support conditions, subjected to uniaxial compression. To this end, numerical models of the cracked plates were created through singular finite element method using a computational code developed in MATLAB. Eigen-buckling analyses were also performed to study the stability behavior of the plates. The numerical results and findings of this research demonstrate the effectiveness of the crack length and location on the buckling capacity of thin plates; however, the degree of efficacy of these parameters in plates with various aspect ratios and support conditions is found to be significantly different. Overall, careful consideration of the aspect ratio, support conditions, and crack parameters in buckling analysis of plates is crucial for efficient stability design and successful application of such thin-walled members.

키워드

참고문헌

  1. Agnihotri, G. (1993), "Stress analysis of a crack using the finite element method", Eng. Fract. Mech., 44(1), 109-125. https://doi.org/10.1016/0013-7944(93)90085-7
  2. Bouchiba, M.S. and Serier, B. (2016), "New optimization method of patch shape to improve the effectiveness of cracked plates repair", Struct. Eng. Mech., 58(2), 301-326. https://doi.org/10.12989/sem.2016.58.2.301
  3. Brighenti, R. (2005a), "Buckling of cracked thin-plates under tension or compression", Thin-Wall. Struct., 43(2), 209-224. https://doi.org/10.1016/j.tws.2004.07.006
  4. Brighenti, R. (2005b), "Numerical buckling analysis of compressed or tensioned cracked thin plates", Eng. Struct., 27(2), 265-276. https://doi.org/10.1016/j.engstruct.2004.10.006
  5. Ghanbari Ghazijahani, T., Jiao, H. and Holloway, D. (2014), "Experiments on dented steel tubes under bending", Adv. Struct. Eng., 18(11), 1807-1817. https://doi.org/10.1260/1369-4332.18.11.1807
  6. Ghanbari Ghazijahani, T., Jiao, H. and Holloway, D. (2015), "Plastic buckling of dented steel circular tubes under axial compression: An experimental study", Thin-Wall. Struct., 92(July), 48-54. https://doi.org/10.1016/j.tws.2015.02.018
  7. Ghanbari Ghazijahani, T., Showkati, H. and Jiao, H. (2016), "Buckling assessment of dented truncated cones under external pressure", Adv. Comput. Des., 1(4), 345-356. https://doi.org/10.12989/acd.2016.1.4.345
  8. Guz, A.N. and Dyshel, M.S. (2001), "Fracture and buckling of thin panels with edge crack in tension", Theoret. Appl. Fract. Mech., 36(1), 57-60. https://doi.org/10.1016/S0167-8442(01)00056-8
  9. Guz, A.N. and Dyshel, M.S. (2002), "Buckling and cracking characteristics of two-layered plate in tension", Theoret. Appl. Fract. Mech., 38(1), 103-107. https://doi.org/10.1016/S0167-8442(02)00084-8
  10. Jamal-Omidi, M., Falah, M. and Taherifar, D. (2014), "3-D fracture analysis of cracked aluminum plates repaired with single and double composite patches using XFEM", Struct. Eng. Mech., 50(4), 525-539. https://doi.org/10.12989/sem.2014.50.4.525
  11. Khedmati, M.R., Edalat, P. and Javidruzi, M. (2009), "Sensitivity analysis of the elastic buckling of cracked plate elements under axial compression", Thin-Wall. Struct., 47(5), 522-536. https://doi.org/10.1016/j.tws.2008.10.018
  12. Markstrom, K. and StoAkers, B. (1980), "Buckling of cracked members under tension", Int. J. Sol. Struct., 16(3), 217-229. https://doi.org/10.1016/0020-7683(80)90075-X
  13. Pan, Z., Cheng, Y. and Liu, J. (2013), "A semi-analytical analysis of the elastic buckling of cracked thin plates under axial compression using actual non-uniform stress distribution", Thin-Wall. Struct., 73(December), 229-241. https://doi.org/10.1016/j.tws.2013.08.007
  14. Reddy, J.N. (2006), An Introduction to the Finite Element Method, 3rd Edition, McGraw-Hill Companies Publishing, New York, U.S.A.
  15. Sadek, S.C. and Tawfik, T. (2016), "Buckling of cracked plate reinforced", Proc. Struct. Integr., 1, 234-241. https://doi.org/10.1016/j.prostr.2016.02.032
  16. Shahverdi, H. and Navardi, M.M. (2017), "Free vibration analysis of cracked thin plates using generalized differential quadrature element method", Struct. Eng. Mech., 62(3), 345-355. https://doi.org/10.12989/sem.2017.62.3.345
  17. Seif, A.E. and Kabir, M.Z. (2017), "Experimental study on the fracture capacity and fatigue life reduction of the tensioned cracked plate due to the local buckling", Eng. Fract. Mech., 175(April), 168-183. https://doi.org/10.1016/j.engfracmech.2017.01.023
  18. Seifi, R. and Khoda-yari, N. (2011), "Experimental and numerical studies on buckling of cracked thin-plates under full and partial compression edge loading", Thin-Wall. Struct., 49(12), 1504-1516. https://doi.org/10.1016/j.tws.2011.07.010
  19. Shaw, D. and Huang, Y.H. (1990), "Buckling behavior of a central cracked thin plate under tension", Eng. Fract. Mech., 35(6), 1019-1027. https://doi.org/10.1016/0013-7944(90)90129-5
  20. Shi, X.H., Zhang, J. and Soares, C.G. (2017), "Experimental study on collapse of cracked stiffened plate with initial imperfections under compression", Thin-Wall. Struct., 114(May), 39-51. https://doi.org/10.1016/j.tws.2016.12.028
  21. Sih, G.C. and Lee, Y.D. (1986), "Tensile and compressive buckling of plates weakened by cracks", Theoret. Appl. Fract. Mech., 6(2), 129-138. https://doi.org/10.1016/0167-8442(86)90033-9
  22. Stren, M. (1979), "Families of consistent conforming elements with singular derivative fields", Int. J. Numer. Meth. Eng., 14(3), 409-421. https://doi.org/10.1002/nme.1620140307
  23. Timoshenko, S.P. and Gere, J.M. (1961), Theory of Elastic Stability, 2nd Ed., McGraw-Hill Book Companies Publishing, New York, NY, USA.
  24. Vafai, A., Javidruzi, M. and Estekanchi, H.E. (2002), "Parametric instability of edge cracked plates", Thin-Wall. Struct., 40(1), 29-44. https://doi.org/10.1016/S0263-8231(01)00050-7

피인용 문헌

  1. A Parametric Study on the Elliptical hole Effects of Laminate Composite Plates under Thermal Buckling Load vol.27, pp.1, 2019, https://doi.org/10.1515/secm-2020-0019
  2. A Parametric Study on the Elliptical hole Effects of Laminate Composite Plates under Thermal Buckling Load vol.27, pp.1, 2019, https://doi.org/10.1515/secm-2020-0019
  3. Effect of crack location on buckling analysis and SIF of cracked plates under tension vol.35, pp.2, 2019, https://doi.org/10.12989/scs.2020.35.2.215