Structural Engineering and Mechanics

  • 제69권4호
  • /
  • Pages.371-381
  • /
  • 2019
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Development and application of a hybrid prestressed segmental concrete girder utilizing low carbon materials

  • Yang, Jun-Mo (Department of Civil Engineering, Keimyung University) ;
  • Kim, Jin-Kook (Department of Civil Engineering, Seoul National University of Science and Technology)
  • 투고 : 2018.11.26
  • 심사 : 2019.01.21
  • 발행 : 2019.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

A hybrid prestressed segmental concrete (HPSC) girder utilizing low carbon materials was developed in this paper. This paper introduces the hybrid prestressing concept of pre-tensioning the center segment and assembling all segments by post-tensioning, as well as the development process of the low carbon HPSC girder. First, an optimized mix proportion of 60 MPa high strength concrete containing high volume blast furnace slag was developed, then its mechanical properties and durability characteristics were evaluated. Second, the mechanical properties of 2,400 MPa high strength prestressing strands and the transfer length characteristics in pre-tensioned prestressed concrete beams were evaluated. Third, using those low carbon materials and the hybrid prestressing concept, the HPSC girders were manufactured, and their structural performance was evaluated. A 30-m long HPSC girder for highway bridges and a 35-m long HPSC girder for railway bridges were designed, manufactured, and structurally confirmed as having sufficient strength and safety. Finally, five 35-m long HPSC girders were successfully applied to an actual railway bridge for the first time.

키워드

과제정보

연구 과제 주관 기관 : Korea Agency for Infrastructure Technology Advancement (KAIA)

참고문헌

  1. AASHTO (2017), AASHTO LRFD Bridge Design Specifications, American Association of State Highway and Transportation Officials, Washington, D.C., U.S.A.
  2. ACI Committee 318 (2014), Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary, American Concrete Institute, Farmington Hills, Michigan, U.S.A.
  3. ASTM C1609/C1609 M (2012), Standard Test Method for Flexural Performance of Fiber-reinforced Concrete (Using Beam with Third-Point Loading), ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  4. ASTM C39/39M (2014), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  5. ASTM C469/469M (2014), Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  6. ASTM C666/C666M (2015), Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  7. Barnett, S.J., Soutsos, M.N., Millard, S.G. and Bungey, J.H. (2006), "Strength development of mortars containing ground granulated blast-furnace slag: Effect of curing temperature and determination of apparent activation energies", Cement Concrete Res., 36(3), 434-440. https://doi.org/10.1016/j.cemconres.2005.11.002
  8. Borges, P.H.R., Costa, J.O., Milestone, N.B., Lynsdale, C.J. and Streatfield, R.E. (2010), "Carbonation of CH and CeSeH in composite cement pastes containing high amounts of BFS", Cement Concrete Res., 40, 284-292. https://doi.org/10.1016/j.cemconres.2009.10.020
  9. Briere, V., Harries, K.A., Kasanc, J. and Hagerd, C. (2013), "Dilation behavior of seven-wire prestressing strand-the Hoyer effect", Constr. Build. Mater., 40, 650-658. https://doi.org/10.1016/j.conbuildmat.2012.11.064
  10. British Standards Institution (2004), Eurocode 2: Design of Concrete Structures: Part 1-1: General Rules and Rules for Buildings, British Standards Institution.
  11. CEN (2004), EN 1992-1-2 Eurocode 2: Design of Concrete Structures. Part 1-2: General Rules-Structural Fire Design Comite Europeen de Normalisation, Brussels, Belgium.
  12. Gruyaert, E., Heede, P.V. and Belie, N.D. (2013), "Carbonation of slag concrete: Effect of the cement replacement level and curing on the carbonation coefficient effect of carbonation on the pore structure", Cement Concrete Compos., 35(1), 39-48. https://doi.org/10.1016/j.cemconcomp.2012.08.024
  13. Hamilton, H.R. and Brenkus, N.R. (2013), Long Spans with Transportable Precast Prestressed Girders, University of Florida (Sponsored by Florida Department of Transportation), Michigan, U.S.A.
  14. Han, M.Y., Hwang, E.S. and Lee, C. (2003), "Prestressed concrete girder with multistage prestressing concept", ACI Struct. J., 100(6), 723-731.
  15. Jeon, J.K., Moon, H.Y., Ann, K.Y., Kim, H.S. and Kim, Y.B. (2006), "Effect of ground granulated blast furnace slag, pulverized fuel ash, silica fume on sulfuric acid corrosion resistance of cement matrix", Int. J. Concrete Struct. Mater., 18(2E), 97-102. https://doi.org/10.4334/IJCSM.2006.18.2E.097
  16. KCI (2012), Korea Structural Concrete Design Code, Korea Concrete Institute, Seoul, Korea.
  17. Kim, J.K., Seong, T.R., Jang, K.P. and Kwon, S.H. (2013), "Tensile behavior of new 2,200 MPa and 2,400 MPa strands according to various types of mono anchorage", Struct. Eng. Mech., 47(3), 383-399. https://doi.org/10.12989/sem.2013.47.3.383
  18. Kim, J.K., Yang, J.M. and Yim, H.J. (2016), "Experimental evaluation of transfer length in pretensioned concrete beams using 2,400-MPa prestressed strands", J. Struct. Eng., 142(11), 04016088.
  19. KS D7002 (2018), Uncoated Stress-relieved Steel Wires and Strands for Prestressed Concrete, Korean Standards Association, Seoul, Korea.
  20. KS F2456 (2013), Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, Korean Standards Association, Seoul, Korea.
  21. KS F2584 (2010), Standard Test Method for Accelerated Carbonation of Concrete, Korean Standards Association, Seoul, Korea.
  22. KS F4042 (2012), Polymer Modified Cement Mortar for Maintenance in Concrete Structure, Korean Standards Association, Seoul, Korea.
  23. Mahmoud, E., Ibrahim, A., El-Chabib, H. and Patibandla, V.C. (2013), "Self-consolidating concrete incorporating high volume of fly ash, slag, and recycled asphalt pavement", Int. J. Concrete Struct. Mater., 7(2), 155-163. https://doi.org/10.1007/s40069-013-0044-1
  24. Marti-Vargas, J.R., Arbelaez, C.A., Serna, P., Navarro-Gregori, J. and Pallares-Rubio, L. (2007), "Anlaytical model for transfer length prediction of 13 mm prestressing strand", Struct. Eng. Mech., 26(2), 211-229. https://doi.org/10.12989/sem.2007.26.2.211
  25. Menendez, G.V.B.B., Bonavetti, V. and Irassar, E.F. (2003). "Strength development of ternary blended cement with limestone filler and blast-furnace slag", Cement Concrete Compos., 25(1), 61-67. https://doi.org/10.1016/S0958-9465(01)00056-7
  26. Ministry of Land, Infrastructure and Transportation (MLIT) (2005), Highway Bridge Design Specification, Ministry of Land, Infrastructure and Transportation, Korea.
  27. Ministry of Land, Infrastructure and Transportation (MLIT) (2011), Railway Construction Specification, Ministry of Land, Infrastructure and Transportation, Korea.
  28. Ministry of Land, Infrastructure and Transportation (MLIT) (2015), Railway Design Code, Ministry of Land, Infrastructure and Transportation, Korea.
  29. Mitchell, D., Cook, W.D., Khan, A.A. and Tham, T. (1993), "Influence of high strength concrete on transfer and development length of pretensioning strand", PCI J., 38(3), 52-66. https://doi.org/10.15554/pcij.05011993.52.66
  30. Oh, B.H., Lim, S.N., Lee, M.K. and Yoo, S.W. (2014), "Analysis and prediction of transfer length in pretensioned, prestressed concrete members", ACI Struct. J., 111(3), 549-560. https://doi.org/10.14359/51686571
  31. Shin H.O., Yang, J.M., Yoon, Y.S. and Mitchell, D. (2016), "Mix design of concrete for prestressed concrete sleepers using blast furnace slag and steel fibers", Cement Concrete Compos., 74, 39-53. https://doi.org/10.1016/j.cemconcomp.2016.08.007
  32. Yang, J.M., Kim, J.K. and Yoo, D.Y. (2018), "Transfer length in full-scale pretensioned concrete beams with 1.4 m and 2.4 m section depths", Eng. Struct., 171, 433-444. https://doi.org/10.1016/j.engstruct.2018.05.104
  33. Yang, J.M., Yim, H.J. and Kim, J.K. (2016), "Transfer length of 2,400 MPa seven-wire 15.2 mm steel strands in high-strength pretensioned prestressed concrete beam", Smart Struct. Syst., 17(4), 577-591. https://doi.org/10.12989/sss.2016.17.4.577
  34. Yang, J.M., Yoo, D.Y., Kim, Y.C. and Yoon, Y.S. (2017), "Mechanical properties of steam cured high-strength steel fiber-reinforced concrete with high-volume blast furnace slag", Int. J. Concrete Struct. Mater., 11(2), 391-401. https://doi.org/10.1007/s40069-017-0200-0
  35. Yim, H.J., Yang, J.M. and Kim, J.K. (2018), "Improved prestressed concrete girder with hybrid segments system", Struct. Eng. Mech., 65(2), 183-190. https://doi.org/10.12989/SEM.2018.65.2.183