Steel and Composite Structures

  • 제30권3호
  • /
  • Pages.231-251
  • /
  • 2019
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental and numerical study about seismic retrofitting of corrosion-damaged reinforced concrete columns of bridge using combination of FRP wrapping and steel profiles

  • Afshin, Hassan (Department of Civil Engineering, Sahand University of Technology) ;
  • Shirazi, Mohammad R. Nouri (Department of Civil Engineering, Sahand University of Technology) ;
  • Abedi, Karim (Department of Civil Engineering, Sahand University of Technology)
  • 투고 : 2018.04.17
  • 심사 : 2019.01.31
  • 발행 : 2019.02.10
⟨ 이전 논문 다음 논문 ⟩

초록

In the present study, a numerical and experimental investigation has been carried out on the seismic behavior of RC columns of a bridge which damaged under corrosive environments and retrofitted by various techniques including combined application of CFRP sheets and steel profiles. A novel hybrid retrofitting procedure, including the application of inner steel profiles and outer peripheral CFRP sheets, has been proposed for strengthening purpose. Seven large-scale RC columns of a Girder Bridge have been tested in the laboratory under the influence of simultaneous application of constant axial load and the lateral cyclic displacements. Having verified the finite element modeling, using ABAQUS software, the effects of important parameters such as the corrosion percentage of steel rebars and the number of CFRP layers have been evaluated. Based on the results, retrofitting of RC columns of the bridge with the proposed technique was effective in improving some measures of structural performance such as lateral strength degradation and higher energy absorption capability. However, the displacement ductility was not considerably improved whereas the elastic stiffness of the specimens has been increased.

키워드

참고문헌

  1. AASHTO LRFD (2012), Bridge Design Specifications, American Association of State Highway and Transportation Officials; DC, USA.
  2. ABAQUS (2016), ABAQUS/CAE User's Manual; Dassault Systemes Simulia Corp., Providence, RI, USA.
  3. Abdullah, V. and Katsuki, T. (2003), "An investigation into the behavior and strength of reinforced concrete columns strengthened with ferrocement jackets", Cement Concrete Compos. 25(2), 233-242. https://doi.org/10.1016/S0958-9465(02)00005-7
  4. Adam, J.M., Gimenez, E., Calderon, P.A., Pallares, F.J. and Ivorra, S. (2008), "Experimental study of beam-column joints in axially loaded RC columns strengthened by steel angles and strips", Steel Compos. Struct., Int. J., 8(4), 329-342. https://doi.org/10.12989/scs.2008.8.4.329
  5. Adam, M., Ivorra, S., Pallares, F., Gimenez, E. and Calderon, P. (2009), "Axially loaded RC columns strengthened by steel casing: finite element modeling", Constr. Build. Mater. J., 161, 337-348.
  6. Akkari, M. and Duan, L. (2000), Nonlinear Analysis of Bridge Structures, Bridge Engineering Handbook, (Ed. Wai-Fah Chen and Lian Duan), Boca Raton, CRC Press.
  7. Andisheh, K., Scott, A. and Palermo, A. (2016), Seismic Behavior of Corroded RC Bridge, International Journal of Corrosion, Hindawi Publishing Corporation.
  8. Anoop, M.B. and Rao, K.B. (2015), "Seismic damage estimation of reinforced concrete framed structures affected by chlorideinduced corrosion", Earthq. Struct., Int. J., 9(4), 851-873. https://doi.org/10.12989/eas.2015.9.4.851
  9. Aquino, W. and Hawkins, N.M. (2007), "Seismic retrofitting of corroded reinforced concrete columns using carbon composites", ACI Struct. J., 104(3), p. 348.
  10. Architectural Institute of Japan (1987), Data on ultimate strength design of reinforced concrete structures; Report No. 17, Strength and Ductility of Reinforced Concrete Columns, Tokyo, Japan, pp. 62-85.
  11. Badalamenti, V., Campione, G. and Mangiavillano, M. (2010), "Simplified model for compressive behavior of concrete columns strengthened by steel angles and strips", Eng. Mech. J. ASCE, 136, 230-238. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000069
  12. Barga, F., Gigliotte, R. and Laterza, M. (2006), "Analytical stressstrain relationship for concrete confined by steel stirrups and/or FRP jackets", Struct. Eng. J., 9, 2-19.
  13. Belarbi, A. and Hsu, T.T. (1994), "Constitutive laws of concrete in tension and reinforcing bars stiffened by concrete", Struct. J., 91(4), 465-474.
  14. Campione, G. (2012), "Load carrying capacity of RC compressed columns strengthened with steel angles and strips", Eng. Struct. J., 40, 457-465. https://doi.org/10.1016/j.engstruct.2012.03.006
  15. Carins, J., Plizzari, G., Du, Y., Law, D. and Franzoni, C. (2005), "Mechanical properties of corrosion reinforcement", ACI Materi. J., 102(4), 256-264.
  16. Chen, H.P. and Xiao, N. (2015), "Symptom-based reliability analyses and performance assessment of corroded reinforced concrete structures", Steel Compos. Struct., Int. J., 53(6), 1183-1200.
  17. Choi, E., Rhee, I., Park, J. and Cho, B.S. (2011), "Seismic retrofit of plain concrete piers of railroad bridges using composite of FRP-steel plates", Compos.: Part B, 42, 1097-1107. https://doi.org/10.1016/j.compositesb.2011.03.024
  18. Debaiky, A.S., Green, M.F. and Hope, B.B. (2006), "Long-Term monitoring of carbon fiber-reinforced polymer-wrapped reinforced concrete columns under severe environement", ACI Struct. J., 103(6).
  19. Dionysios, A., Bournas, C. and Triantafillou, C. (2009), "Flexural strengthening of reinforced concrete columns with Nearsurface-Mounted FRP or Stainless Steel", ACI Struct. J., 106(4).
  20. Du, Y.G., Clark, L.A. and Chan, A.H.C. (2005), "Residual capacity of corroded reinforcing bars", Magaz. Concrete Res., 57(3), 135-147 https://doi.org/10.1680/macr.2005.57.3.135
  21. Fookers, P. (1995), "Concrete in hot dry salty environment", Concrete, 29(1), 34-39.
  22. Gao, S., Ikai, T., Ni, J. and Ge, H. (2016), "Load-carrying capacity degradation of reinforced concrete piers due to corrosion of wrapped steel plates", Steel Compos. Struct., Int. J., 20(1), 91-106. https://doi.org/10.12989/scs.2016.20.1.091
  23. Gao, S., Ni, J., Zhang, D. and Ge, H. (2017), "Strength degradation of reinforced concrete piers wrapped with steel plates under local corrosion", Steel Compos. Struct., Int. J., 24(6), 753-765.
  24. Gobarah, A., Biddah, A. and Mahgoub, M. (1997), "Rehabilitation of reinforced concrete columns using corrugated steel jacketing", J. Earthq. Eng., 4(1), 651-673.
  25. Goksu, C. (2012), "Seismic behavior of RC columns with corroded plain and deformed reinforcing bars", Ph.D. Dissertation; Istanbul Technical University, Turkey.
  26. Gong, J., Zhong, W. and Zhao, G. (2004), "Experimental study on low-cycle behavior of corroded reinforced concrete member under eccentric compression", J. Build. Struct., 25(5), 92-104. https://doi.org/10.3321/j.issn:1000-6869.2004.05.015
  27. Greco, R. and Marano, G.C. (2015), "Strength deterioration of reinforced concrete column sections subject to pitting", Comput. Concrete, Int. J., 15(4), 643-671. https://doi.org/10.12989/cac.2015.15.4.643
  28. Hognestad, E. (1951), "A study of combined bending and axial load in reinforced concrete members", Bulletin No. 399; Univ. of Illinois, Eng. Experimental Station, Champaign, IL, USA.
  29. Husain, M., Mohamed, H. and Ahmed, S. (2017), "Evaluation of non-conforming corroded bridge piers exposed to seismic loads", Int. J. Eng. Innov. Technol., 7(3).
  30. Kwon, M. and Spacone, E. (2002), "Three-dimensional finite element analysis of reinforced concrete columns", Comput. Struct., 80, 199-212. https://doi.org/10.1016/S0045-7949(01)00155-9
  31. Lay, S. and Schiebl, P. (2003), "Life cycle management of concrete infrastructures for improved sustainability", European Community Fifth Framework program, GROWTH.
  32. Lee, C., Bonacci, J.F., Thomas, M.D., Maalej, M., Khajehpour, S., Hearn, N., Pantazopoulou, S. and Sheikh, S. (2000), "Accelerated corrosion and repair of reinforced concrete columns using CFRP sheets", Can. J. Civil Eng., 27(5), 949-959. https://doi.org/10.1139/l00-031
  33. Lee, H.S., Kage, T., Noguchi, T. and Tomosawa, F. (2003), "An experimental study on the strengthening effects of reinforced concrete columns damaged by rebar corrosion strengthened with carbon fiber sheets", Cement Concrte Res., 33(4), 563-570. https://doi.org/10.1016/S0008-8846(02)01004-9
  34. Li, J., Gong, J. and Wang, L. (2009), "Seismic behavior of corrosion-damaged reinforced concrete columns strengthen using combined carbon fiber-reinforced polymer and steel jacket", J. Constr. Build. Mater., 23, 2653-2663. https://doi.org/10.1016/j.conbuildmat.2009.01.003
  35. Lu, Y.Y., Chen, S.X. and Zhao, G.F. (2005), "An experimental study on the seismic behavior of reinforced concrete column strengthened with bonded steel hoops and carbon fiber reinforced polymer sheet", China Civil Eng. J., 38(8), 10-7. https://doi.org/10.3321/j.issn:1000-131X.2005.08.003
  36. Ma, Y., Che, Y. and Gong, J. (2012), "Behavior of corrosion damaged circular reinforced concrete columns under cyclic loading", Constr. Build. Mater., 29, 548-556. https://doi.org/10.1016/j.conbuildmat.2011.11.002
  37. Maaddawy, T. (2008), "Behavior of corrosion-damaged RC columns wrapped with FRP under combined flexural and axial loading", Cement Concrte Compos., 30(6), 524-534. https://doi.org/10.1016/j.cemconcomp.2008.01.006
  38. Malerba, P.G., Sgambi, L., Ielmini, D. and Gotti, G. (2017), "Influence of corrosive phenomena on bearing capacity of RC and PC beams", Adv. Concrete Constr., Int. J., 5(2), 117-143. https://doi.org/10.12989/acc.2017.5.2.117
  39. Mangat, P.S. and Elgarf, M.S. (1999), "Bond characteristics of corroding reinforcement in concrete beams" Mater. Struct., 32(2), 89-97. https://doi.org/10.1007/BF02479434
  40. Meda, A., Mostosi, S., Rinaldi, Z. and Riva, P. (2014), "Experimental evaluation of the corrosion influence on the cyclic behavior of RC column", Eng. Struct., 76, 112-123. https://doi.org/10.1016/j.engstruct.2014.06.043
  41. Montuori, R. and Piluso, V. (2009), "Reinforced concrete columns strengthened with angles and battens subjected to eccentric load", Eng. Struct. J., 31(2), 539-550. https://doi.org/10.1016/j.engstruct.2008.10.005
  42. Nakayama, K., Yamakawa, T., Iraha, S. and Biwasa, A. (1995), "An experimental study on plastic behavior of reinforced concrete columns corroded in electrolytic corrosion test", Proc. Jpn. Concr. Inst. Annu. Conf , 17(1), 883-888.
  43. Pantazopoulou, S.J., Bonacci, J.F., Sheikh, S., Thomas, M.D.A. and Hearn, N. (2001), "Repair of corrosion-damaged columns with FRP wraps", J. Compos. Constr., 5(1), 3-11. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:1(3)
  44. Ranjith, A., Balaji, K. and Manjunath, K. (2016), "Evaluating the effect of corrosion on service life prediction of RC structures- A parametric study", Int. J. Sustain. Built Environ., 5, 587-603. https://doi.org/10.1016/j.ijsbe.2016.07.001
  45. Ramirez, L., Barcena, M., Urreta, I. and Sanchez, A. (1997), "Efficiency of short steel jackets for strengthening of square section concrete column", Constr. Build. Mater. J., 11(5), 45-52.
  46. Rodriguez, J., Ortega, L.M. and Casal, J. (1996), "Load bearing capacity of concrete columns with corroded reinforcement; Corrosion of reinforcement in concrete construction", Royal Society of Chemistry, pp. 220-230.
  47. Saatcioglu, M. and Razvi, S. (1991), "Analytical model for confined concrete", Research Report No. 9101: Dept. of Civil Engineering, University of Ottawa, Ottawa, ON, Canada, 59.
  48. Sasmal, S., Ramanjaneyulu, K., Novak, B., Srinivas, V., Kumar, K.S., Korkowski, C., Roehm, C., Lakshmanan, N. and Iyer, N.R. (2011), "Seismic retrofitting of nonductile beam-column sub-assemblage using FRP wrapping and steel plate jacketing", Constr. Build. Mater., 25, 175-182. https://doi.org/10.1016/j.conbuildmat.2010.06.041
  49. Sheikh, S.A. and Yau, G. (2002), "Seismic behavior of concrete columns confined with steel and fiber-reinforced polymers", ACI Struct. J., 99(1), 72-80.
  50. Tastani, S.P. and Pantazopoulou, S.J. (2004), "Experimental evaluation of FRP jackets in upgrading RC corroded columns with substandard detailing", Eng. Struct., 26, 817-829. https://doi.org/10.1016/j.engstruct.2004.02.003
  51. Val, D.V. (2007), "Deterioration of strength of RC beam due to corrosion and its influence on beam reliability", J. Struct. Eng., 133(9), 1297-1306. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:9(1297)
  52. Vandoros, K.G. and Dritsos, S.E. (2008), "Concrete jacket construction detail effectiveness when strengthening RC columns", Constr. Build. Mater., 22(3), 264-276. https://doi.org/10.1016/j.conbuildmat.2006.08.019
  53. Wang, X. (2004), "Research of seismic Performance and Hysteretic Mode of Corroded Reinforced Concrete", Members Master; Xi'an, China.
  54. Yu, K., Huang, T. and Lu, L.W. (1989), "Design, analysis and experiment planning of one-story reinforced concrete framewall-diaphragm assemblage", Fritz Engineering Laboratory Library; Department of Civil Engineering, Leigh University, Bethiehem, PA, USA.
  55. Yuksel, I. (2015), "Rebar corrosion effects on structural behavior of building", Struct. Eng. Mech., Int. J., 54(6), 1111-1133. https://doi.org/10.12989/sem.2015.54.6.1111
  56. Zhang, W.P., Shang, D.F. and Gu, X.L. (2006), "Stress-strain relationship of corroded steel bars", J. Tongji Univ. (Natural Scienec), 34(5), 586-592. https://doi.org/10.3321/j.issn:0253-374X.2006.05.004