Steel and Composite Structures

  • 제30권3호
  • /
  • Pages.201-215
  • /
  • 2019
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Numerical investigation of cyclic performance of frames equipped with tube-in-tube buckling restrained braces

  • 투고 : 2017.08.31
  • 심사 : 2019.01.26
  • 발행 : 2019.02.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this research, the behavior of tube-in-tube BRBs (TiTBRBs) has been investigated. In a typical TiTBRB, the yielding core tube is located inside the outer restraining one to dissipate energy through extensive plastic deformation, while the outer restraining tube remains essentially elastic. With the aid of FE analyses, the monotonic and cyclic behavior of the proposed TiTBRBs have been studied as individual brace elements. Subsequently, a detailed finite element model of a representative single span-single story frame equipped with such a TiTBRB has been constructed and both monotonic and cyclic behavior of the proposed TiTBRBs have been explored under the application of the AISC loading protocol at the braced frame level. With the aid of backbone curves derived from the FE analyses, a simplified frame model has been developed and verified through comparison with the results of the detailed FE model. It has been shown that, the simplified model is capable of predicting closely the cyclic behavior of the TiTBRB frame and hence can be used for design purposes. Considering type of connection detail used in a frame, the TiTBRB member which behave satisfactorily at the brace element level under cyclic loading conditions, may suffer global buckling due to the flexural demand exerted from the frame to the brace member at its ends. The proposed TiTBRB suit tubular members of offshore structures and the application of such TiTBRB in a typical offshore platform has been introduced and studied in a single frame level using detailed FE model.

키워드

참고문헌

  1. AISC 341-10 (2010), Seismic provisions for structural steel buildings; Am. Inst. Steel Constr., Chicago, IL, USA (1).
  2. AISC 360-10 (2010), Specification for Structural Steel Buildings (ANSI/AISC 360-10); Am. Inst. Steel Constr., Chicago, IL, USA.
  3. Chou, C.C. and Chen, S.Y. (2010), "Subassemblage tests and finite element analyses of sandwiched buckling-restrained braces", Eng. Struct., 32(8), 2108-2121. DOI: http://dx.doi.org/10.1016/j.engstruct.2010.03.014
  4. Clough, R.W. and Penzien, J. (1993), Dynamics of Structures, (2nd ed.), McGraw-Hill.
  5. Della Corte, G., D'Aniello, M. and Landolfo, R. (2014), "Field testing of all-steel buckling-restrained braces applied to a damaged reinforced concrete building", J. Struct. Eng., 141(1), D4014004. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001080
  6. Dongbin, Z., Xin, N., Peng, P., Mengzi, W., Kailai, D. and Yabin, C. (2016), "Experimental study and finite element analysis of a buckling-restrained brace consisting of three steel tubes with slotted holes in the middle tube", J. Constr. Steel Res., 124, 1-11. https://doi.org/10.1016/j.jcsr.2016.05.003
  7. Fahnestock, L.A., Sause, R. and Ricles, J.M. (2003), "Analytical and experimental studies on buckling restrained braced composite frames", In: Proceedings of the International Workshop on Steel and Concrete Composite Construction (IWSCCC-2003), pp. 177-188.
  8. Fahnestock, L.A., Ricles, J.M. and Sause, R. (2007a), "Experimental evaluation of a large-scale buckling-restrained braced frame", J. Struct. Eng., 133(9), 1205-1214. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:9(1205)
  9. Fahnestock, L.A., Sause, R. and Ricles, J.M. (2007b), "Seismic Response and Performance of Buckling-Restrained Braced Frames", J. Struct. Eng., 133(9), 1195-1204. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:9(1195)
  10. Fotoohabadi, A. (2015), "An investigation of the behavior of steel frames equiped with double-tube buckling restrained braces", M.Sc. Dissertation; (Under Supervisin of Shahrokh Maalek), School of Civil Engineering, College of Engineering, University of Tehran, Iran.
  11. Ghasemi, S. (2006), "The Introduction of a Buckling Restrained Bracing System for Steel Structures, M.Sc. Dissertation; (Under (Supervision of Shahrokh Maalek), School of Civil Engineering, College of Engineering, University of Tehran, Iran.
  12. Heidary-Torkamani, H. and Maalek, S. (2017), "Conceptual numerical investigation of all-steel Tube-in-Tube buckling restrained braces", J. Constr. Steel Res., 139, 220-235. https://doi.org/10.1016/j.jcsr.2017.09.022
  13. Hoveidae, N., Tremblay, R., Rafezy, B. and Davaran, A. (2015), "Numerical investigation of seismic behavior of short-core allsteel buckling restrained braces", 114, 89-99. DOI: http://dx.doi.org/10.1016/j.jcsr.2015.06.005
  14. Jia, L.J. and Kuwamura, H. (2014), "Prediction of cyclic behaviors of mild steel at large plastic strain using coupon test results", J. Struct. Eng., 140(2), 04013056. DOI: http://ascelibrary.org/doi/10.1061/%28ASCE%29ST.1943-541X.0000848 (October 15, 2016).
  15. Jiang, Z., Guo, Y., Zhang, B. and Zhang, X. (2015), "Influence of design parameters of buckling-restrained brace on its performance", J. Constr. Steel Res., 105, 139-150. DOI: http://dx.doi.org/10.1016/j.jcsr.2014.10.024
  16. Kersting, R.A., Fahnestock, L.A. and Lopez, W.A. (2015), "Seismic design of steel buckling-restrained braced frames - a guide for practicing engineers", NEHRP Seismic Design Technical Brief No. 11, (11).
  17. Korzekwa, A. and Tremblay, R. (2009), "Numerical simulation of the cyclic inelastic behaviour of buckling restrained braces", In: Behaviour of Steel Structures in Seismic Areas, CRC Press. DOI: http://dx.doi.org/10.1201/9780203861592.ch94
  18. Lopez, W.A., Gwie, D.S., Lauck, T.W. and Saunders, C., (2004), "Structural design and experimental verification of a bucklingrestrained braced frame system", Eng. Journal, AISC, 41(4), 177-186.
  19. Maalek, S. (1999), "Structural Assessment and Quality Control Procedures for the Homa Aircraft Hangar No. 3", Int. J. Sp. Struct., 14(3), 167-184. https://doi.org/10.1260/0266351991494795
  20. Maalek, S. and Ghasemi, S. (2010), "The Introduction of a Buckling Restrained Bracing System", Proceedings of the 14th European Conference on Earthquake and Engineering.
  21. Mazzolani, F.M., James, M.R. and Richard, S. (2009), STESSA 2009 : Proceedings of the Sixth International Conference on Behaviour of Steel Structures in Seismic Areas, Philadelphia, PA, USA, August, CRC Press.
  22. Merritt, S., Uang, C.M. and Benzoni, G. (2003), "Subassemblage testing of STAR SEISMIC buckling-restrained braces", Rep. No. TR-2003, 4.
  23. Omidi, H. (2014), "Presentation and development of the proposed double-tube system as Buckling Restrained Brace", M.Sc. Dissertation; Under Supervision of Shahrokh Maalek", School of Civil Engineering, College of Engineering, University of Tehran, Iran.
  24. Piedrafita, D., Maimi, P. and Cahis, X. (2015), "A constitutive model for a novel modular all-steel buckling restrained brace", Eng. Struct., 100, 326-331. DOI: http://dx.doi.org/10.1016/j.engstruct.2015.06.026
  25. Sabelli, R., Mahin, S. and Chang, C. (2003), "Seismic demands on steel braced frame buildings with buckling-restrained braces", Eng. Struct., 25(5), 655-666. DOI: http://www.sciencedirect.com/science/article/pii/S014102960200175X (August 1, 2015) https://doi.org/10.1016/S0141-0296(02)00175-X
  26. SIMULIA (2007), ABAQUS analysis and theory manual; Karlsson, and Sorensen Inc, Providence, RI, USA.
  27. Takeda, Y., Kimura, Y., Yoshioka, K., Furuya, N. and Takemoto, Y. (1976), "An Experimental Study on Braces encased in Steel Tube and mortal", In: Annual Meeting Architectural Institute of Japan, pp. 1041-1042.
  28. Tremblay, R., Bolduc, P., Neville, R. and DeVall, R. (2006), "Seismic testing and performance of buckling-restrained bracing systems", Can. J. Civil Eng., 33(2), 183-198. DOI: http://www.nrcresearchpress.com/doi/abs/10.1139/l05-103 (October 11, 2016)
  29. Watanabe, A., Hitomi, Y., Saeki, E., Wada, A. and Fujimoto, M. (1988), "Properties of brace encased in buckling-restraining concrete and steel tube", In: Proceedings of Ninth World Conference on Earthquake Engineering, 719-724.
  30. Yin, Z. and Bu, F. (2016), "Overall Stability Analysis of Improved Buckling Restrained Braces", Open Civ. Eng. J., 10(1), 61-75. https://doi.org/10.2174/1874149501610010061
  31. Yin, Z.Z. and Wang, X.L (2010), "Hysteretic Performance Analysis of Double-Tube Buckling Restrained Braces with Contact-Ring", Adv. Mater. Res., 163-167, 681-685. https://doi.org/10.4028/www.scientific.net/AMR.163-167.681
  32. Yin, Z.Z., Wang, X.L. and Li, X.D. (2011), "An Experimental Study on Double-Tube Bucking Restrained Braces with Contact Rings", Adv. Mater. Res., 163-167, 475-480. https://doi.org/10.4028/www.scientific.net/AMR.163-167.475