Structural Engineering and Mechanics

  • 제69권3호
  • /
  • Pages.347-359
  • /
  • 2019
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Dorim-Goh bridge using ambient trucks through short-period structural health monitoring system

  • Kaloop, Mosbeh R. (Department of Civil and Environmental Engineering, Incheon National University) ;
  • Hwang, Won Sup (Department of Civil Engineering, Inha University) ;
  • Elbeltagi, Emad (Structural Engineering Department, Mansoura University) ;
  • Beshr, Ashraf (Public Works and Civil Engineering Department, Mansoura University) ;
  • Hu, Jong Wan (Department of Civil and Environmental Engineering, Incheon National University)
  • 투고 : 2018.08.08
  • 심사 : 2018.12.31
  • 발행 : 2019.02.10
⟨ 이전 논문 다음 논문 ⟩

초록

This paper aims to evaluate the behavior of Dorim-Goh bridge in Seoul, Korea, under static and dynamic loads effects by ambient trucks. The prestressed concrete (PSC) girders and reinforcement concrete (RC) slab of the bridge are evaluated and assessed. A short period monitoring system is designed which comprises displacement, strain and accelerometer sensors to measure the bridge performance under static and dynamic trucks loads. The statistical analysis is used to assess the static behavior of the bridge and the wavelet analysis and probabilistic using Weibull distribution are used to evaluate the frequency and reliability of the dynamic behavior of the bridge. The results show that the bridge is safe under static and dynamic loading cases. In the static evaluation, the measured neutral axis position of the girders is deviated within 5% from its theoretical position. The dynamic amplification factor of the bridge girder and slab are lower than the design value of that factor. The Weibull shape parameters are decreased, it which means that the bridge performance decreases under dynamic loads effect. The bridge girder and slab's frequencies are higher than the design values and constant under different truck speeds.

키워드

과제정보

연구 과제 주관 기관 : Incheon National University

참고문헌

  1. Caglayan, B.O., Ozakgul, K. and Tezer, O. (2012), "Assessment of a concrete arch bridge using static and dynamic load tests", Struct. Eng. Mech., 41(1), 83-94. https://doi.org/10.12989/sem.2012.41.1.083
  2. Deng, L., Cai, C. and Barbato, M. (2011), "Reliability-based dynamic load allowance for capacity rating of prestressed concrete girder bridges", J. Brid. Eng., 16(6), 872-880. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000178
  3. Deng, L. and Cai, C. (2010), "Development of dynamic impact factor for performance evaluation of existing multi-girder concrete bridges", Eng. Struct., 32(1), 21-31. https://doi.org/10.1016/j.engstruct.2009.08.013
  4. Dinler, A. and Akdag, S.A. (2009), "A new method to estimate Weibull parameters for wind energy applications", Energy Convers. Manage., 50(7), 1761-1766. https://doi.org/10.1016/j.enconman.2009.03.020
  5. Ducruet, C., Carvalho, L. and Roussin, S. (2012), The Flight of Icarus? Incheon's Transformation from Port Gateway to Global City, Cities, Regions, and Flows, Routledge, 149-169.
  6. Fan, X.P. and Liu, Y.F. (2018), "Time-variant reliability prediction of bridge system based on BDGCM and SHM data", Struct. Contr. Health Monit., 25(7), e2185. https://doi.org/10.1002/stc.2185
  7. Fatemi, S.J., Sheikh, A.H. and Ali, M.S. (2018), "Determination of load distribution factors of steel-concrete composite box and Igirder bridges using 3D finite element analysis", Austr. J. Struct. Eng., 19(2), 131-145. https://doi.org/10.1080/13287982.2018.1452330
  8. Farzampour, A., Kamali-Asl, A. and Hu, J. (2018a), "Unsupervised identification of arbitrarily-damped structures using time-scale independent component analysis: Part I", J. Mech. Sci. Technol., 32(2), 567-577. https://doi.org/10.1007/s12206-018-0104-6
  9. Farzampour, A., Kamali-Asl, A. and Hu, J. (2018b), "Unsupervised identification of arbitrarily-damped structures using time-scale independent component analysis: Part II", J. Mech. Sci. Technol., 32(9), 4413-4422. https://doi.org/10.1007/s12206-018-0839-8
  10. Grubb, M.A., Corven, J.A., Wilson, K.E., Bouscher, J.W. and Volle, L.E. (2007), Load and Resistance Factor Design LRFD for Highway Bridge Superstructures-Design Manual, FHWA NHI07-035, Federal Highway Administration, Washington, D.C., U.S.A.
  11. Gunter, R. (2016), "Structural evaluation of SCDOT prestressed channel bridges", M.Sc. Dissertation, Clemson University, U.S.A.
  12. Hill, R. and Okoroafor, E.U. (1995), "Weibull statistics of fiber bundle failure using mechanical and acoustic emission testing: The influnce of interfiber friction", Compos., 26(10), 699-705. https://doi.org/10.1016/0010-4361(95)91136-S
  13. Huang, D. (2001), "Dynamic analysis of steel curved box girder bridges", J. Brid. Eng., 6(6), 506-513. https://doi.org/10.1061/(ASCE)1084-0702(2001)6:6(506)
  14. Hwang, E. and Nowak, A.S. (1989), "Dynamic analysis of girder bridges", Transport. Res. Rec., 4(3), 85-92.
  15. ISO (1995), Mechanical Vibration-Road Surface Profiles-Reporting of Measured Data, ISO 8068:1995 (E), Geneva.
  16. Issa, M.A. and Shahawy, M.A. (2004), "Dynamic and static tests of prestressed concrete girder bridges in Florida", Proceedings of the IABMAS'04 Bridge Maintenance, Safety, Management and Cost, Kyoto, Taylor & Francis, London, U.K.
  17. Kaloop, M., Elbeltagi, E., Hu, J. and Elrefai, A. (2017), "Recent advances of structures monitoring and evaluation using GPS-time series monitoring systems: A review", ISPRS Int. J. Geo-Informat., 6(12), 382. https://doi.org/10.3390/ijgi6120382
  18. Kaloop, M., Hu, J. and Elbeltagi, E. (2016), "Evaluation of high-speed railway bridges based on a nondestructive monitoring system", Appl. Sci., 6(1), 24. https://doi.org/10.3390/app6010024
  19. Kaloop, M.R., Hu, J.W. and Bigdeli, Y. (2017), "The performance of structure-controller coupled systems analysis using probabilistic evaluation and identification model approach", Shock Vibr., 2017.
  20. Koto, Y., Konishi, T.,Sekiya, H. and Miki, C. (2019), "Monitoring local damage due to fatigue in plate girder bridge", J. Sound Vibr., 438(6), 238-250. https://doi.org/10.1016/j.jsv.2018.09.009
  21. Kim, J. and Sitar, N. (2013), "Reliability approach to slope stability analysis with spatially correlated soil properties", Soils Foundat., 53(1), 1-10. https://doi.org/10.1016/j.sandf.2012.12.001
  22. Kim, S.H., Ahn, J., Jung, C. Jang, J. and Park, Y. (2014), "Behaviour of steel-box semi-integral abutment bridge considering temperature-earth pressure change", Int. J. Steel Struct., 14(1), 117-140. https://doi.org/10.1007/s13296-014-1011-7
  23. Kim, J.J., Jin, W.N., Ho, J.K., Jae, H.K., Sung, B.K. and Keun, J.B. (2008), "Overview and applications of precast, prestressed concrete adjacent box-beam bridges in South Korea", PCI J., 53(4), 83-107. https://doi.org/10.15554/pcij.07012008.83.107
  24. Ren, X. and Yue, Q. (2018), "Reliability assessment of reinforced concrete structures based on random damage model", Struct. Infrastruct. Eng., 14(6), 780-790. https://doi.org/10.1080/15732479.2017.1360366
  25. Leira, B., Thons, S. and Faber, M. (2017), "System reliability of bridge structure subjected to chloride ingress", Proceedings of the Joint COST TU1402-COST TU1406-IABSE WC1 Workshop, Zagreb, Croatia.
  26. Li, H., Yi, T., Gu, M. and Huo, L. (2009), "Evaluation of earthquake-induced structural damages by wavelet transform", Progr. Nat. Sci., 19(4), 461-470. https://doi.org/10.1016/j.pnsc.2008.09.002
  27. Liu, W., Zhang, H. and Rasmussen, K. (2018), "System reliability-based direct design method for space frames with cold-formed steel hollow sections", Eng. Struct., 166, 79-92. https://doi.org/10.1016/j.engstruct.2018.03.062
  28. Liu, X., Kuang, Z., Yin, L. and Hu, L. (2017), "Structural reliability analysis based on probability and probability box hybrid model", Struct. Safety, 68, 73-84. https://doi.org/10.1016/j.strusafe.2017.06.002
  29. Modares, R. and Taha, J.M. (2014), "Reliability assessment of structures using interval uncertainty analysis", Proceedings of the 2nd International Conference on Vulnerability and Risk Analysis and Management (ICVRAM) and the Sixth International Symposium on Uncertainty, Modeling, and Analysis (ISUMA), Liverpool, U.K., July.
  30. Monarrez, M.R.P. (2018), "Weibull stress distribution for static mechanical stress and its stress/strength analysis", Qual. Reliab. Eng. Int., 34(2), 229-244. https://doi.org/10.1002/qre.2251
  31. Mohseni, I., Ashin, A., Choi, W. and Kang, J. (2018), "Development of dynamic impact factor expressions for skewed composite concrete-steel slab-on-girder bridges", Adv. Mater. Sci. Eng., 2018. https://doi.org/10.1155/2013/646085
  32. Nabizadehdarabi, A. (2015), "Reliability of bridge superstructures in Wisconsin", M.Sc. Dissertation, University of Wisconsin-Milwaukee, U.S.A.
  33. Naser, A.F. and Wang, Z. (2013), "Evaluation of the static and dynamic structural performance of segmental pre-stressed concrete box girder bridge after repairing and strengthening", Front. Struct. Civil Eng., 7(2), 164-177. https://doi.org/10.1007/s11709-013-0196-8
  34. Nowak, A.S. and Szerszen, M.M. (2000), "Structural reliability as applied to highway bridges", Prog. Struct. Eng. Mater., 2, 218-224. https://doi.org/10.1002/1528-2716(200004/06)2:2<218::AID-PSE27>3.0.CO;2-8
  35. Nguyen, T.X. and Tran, D.V. (2015), "Determination of dynamic impact factor for continuous bridge and cable-stayed bridge due to vehicle braking force with experimental investigation", Proceedings of the 16th Asia Pacific Vibration Conference, HUST, Hanoi, Vietnam.
  36. Paeglite, I. and Paeglitis, A. (2013), "The dynamic amplification factor of the bridges in Latvia", Proc. Eng., 57, 851-858. https://doi.org/10.1016/j.proeng.2013.04.108
  37. Peiris, A. and Harik, I. (2016), "Load testing of bridges for load rating", Proceedings of the 7th International Conference on Sustainable Built Environment, Kandy, Sri Lanka.
  38. Phares, B., Lu, P., Wipf, T., Greimann, T. and Seo, J. (2013), "Field validation of a statistical-based bridge damage-detection algorithm", J. Brid. Eng., 18(11), 1227-1238. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000467
  39. Sayed, M.A., Kaloop, M., Kim, E. and Kim, D. (2017), "Assessment of acceleration responses of a railway bridge using wavelet analysis", KSCE J. Civil Eng., 21(5), 1844-1853. https://doi.org/10.1007/s12205-016-1762-0
  40. Seguro, J.V. and Lambert, T.W. (2000), "Modern estimation of the parameters of the weibull wind speed distribution for wind energy analysis", Wind Eng. Industr. Aerodyn., 85(1), 75-84. https://doi.org/10.1016/S0167-6105(99)00122-1
  41. Seo, J., Phares, B., Lu, P., Wipf, T. and Dahlberg, J. (2013), "Bridge rating protocol using ambient trucks through structural health monitoring system", Eng. Struct., 46, 569-580. https://doi.org/10.1016/j.engstruct.2012.08.012
  42. Seo, J., Hu, J. and Lee, J. (2016), "Summary review of structural health monitoring applications for highway bridges", J. Perform. Constr. Facilit., 30(4), 04015072.
  43. Seo, J., Kilaru, C., Phares, B. and Lu, P. (2017), "Agricultural vehicle load distribution for timber bridges", J. Brid. Eng., 22(11), 04017085.
  44. Shahsavari, V. (2017), "Condition assessment of bridge structures using statistical analysis of wavelets", Ph.D. Dissertation, Laval University, Laval, Canada.
  45. Sohn, H., Farrar, C., Hemez, F., Shunk, D., Stinemates, D., Nadler, B. and Czarnecki, J. (2004), A Review of Structural Health Monitoring Literature: 1996-2001, Los Alamos National Laboratory Report, LA-13976-MS.
  46. Sobanjo, J. (2011), "State transition probabilities in bridge deterioration based on Weibull sojourn times", Struct. Infrastruct. Eng., 7(10), 747-764. https://doi.org/10.1080/15732470902917028
  47. Strauss, A., Hoffmann, S., Windener, R. and Bergmeister, K. (2009), "Structural assessment and reliability analysis for existing engineering structures, applications for real structures", Struct. Infrastruct. Eng., 5(4), 277-286. https://doi.org/10.1080/15732470601185638
  48. Vaez, S. and Saeid, S. (2018), "Reliability-based optimization of one-bay 2-D steel frame", KSCE J. Civil Eng., 7(22), 2433-2440. https://doi.org/10.1007/s12205-017-1881-2
  49. Verma, A. K, Ajit, S. and Karanki, D.R. (2016), Reliability and Safety Engineering, Springer S., Springer-Verlag London.
  50. Wassef, W., Smith, C., Clancy, C. and Smith, M. (2003), Comprehensive Design Example for Prestressed Concrete (PSC) Girder Superstructure Bridge with Commentary (in US Customary Units), Report No.: FHWA NHI-04-043, The Federal Highway Administration, U.S.A.
  51. Wang, N. (2010), "Reliability-based condition assessment of existing highway bridges", Ph.D. Dissertation, Georgia Institute of Technology, Atlanta, U.S.A.
  52. Womack, B.K., Halling, M. and Bott, S. (2001), Static and Dynamic Testing of a Curved, Steel Girder Bridge in Salt Lake City, UTAH, Report No. UT-00-13, Utah Department of Transportation Research Division, Utah, U.S.A.
  53. Yang, Y., Wang, X. and Wu, Z. (2016), "Evaluation of the static and dynamic behaviors of long-span suspension bridges with FRP cables", J. Brid. Eng., 21(12), 06016008. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000972
  54. Yan, J., Deng, L. and He, W. (2017), "Evaluation of existing prestressed concrete bridges considering the randomness of live load distribution factor due to random vehicle loading position", Adv. Struct. Eng., 20(5), 737-746. https://doi.org/10.1177/1369433216664350
  55. Zhang, L., Zhang, J., You, L. and Zhou, S. (2018), "Reliability analysis of structures based on a probability-uncertainty hybrid model", Qual. Reliab. Eng. Int., 35(1), 263-279. https://doi.org/10.1002/qre.2396

피인용 문헌

  1. Numerical and experimental investigation for monitoring and prediction of performance in the soft actuator vol.77, pp.2, 2021, https://doi.org/10.12989/sem.2021.77.2.167