참고문헌
- Abbasnia, R., Godossi, P., Ahmadi, J. (2005). Prediction of restrained shrinkage based on restraint factors in patching repair mortar, Cement and Concrete Research, 35(10), 1909-1913. https://doi.org/10.1016/j.cemconres.2004.11.020
- ACI Committee 209R-92. Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures, ACI Practice Manual.
- Arundhathy, S., Vasugi, V. (2016). Engineered cementitious composites for sustainable construction, Key Engineering Materials, 692, 17-26. https://doi.org/10.4028/www.scientific.net/KEM.692.17
- Cha, S.W., Oh, B.H., Lee, H.J. (2002). Evaluation of thermal and shrinkage stresses in hardening concrete considering early-age creep effect, Journal of the Korea Concrete Institute, 14(3), 382-289 [in Korean]. https://doi.org/10.4334/JKCI.2002.14.3.382
- Deshpande, U.L., Murnal, P.B. (2016). Ductile Concrete Using Engineered Cementitious Composites, International Journal of Engineering Research, 5013(5), 756-760.
- Hajj, E.Y., Sanders, D.H., Weitzel, N.D. (2016). Development of Specifications for Engineered Cementitious Composites for Use in Bridge Deck Overlays, NDOT Project 13-39, Nevada Department of Transportation, February 2016, FINAL REPORT.
- Han, C.G., Han, M.C., Song, S.H., Yoon, S. (2009). Drying shrinkage of concrete combining expansive additives and shrinkage reducing agent, Journal of the Korea Concrete Institute, 93, 87-94 [in Korean].
- Han, M.C. (2006). Prediction of setting time of super retarding concrete incorporating blast furnace slag, Architectural Research(structural part), 22(12), 87-95 [in Korean].
- Kim, J.H., Yoon, H.D., Jun, E. (2006). Material design, characteristics and application of engineered cementitious composites, Magazine of the Korea Concrete Institute, 18(1), 28-35 [in Korean].
- Kim, Y.Y. (2007). Design and constructibility of an engineered cementitious composite produced with cement-based mortar matrix and synthetic fibers, Korean Society for Composite Materials, 20(2), 21-26 [in Korean].
- Kim, Y.Y., Li, V.C. (2003). Performance of Engineered Cementitious Composites (ECC) Link Slabs for Jointless Bridge Deck System, Journal of the Korean Society of Civil Engineers A, 23(6A), 1143-1154 [in Korean].
- Krouma, A., Syed, Z.I. (2016). A review on the use of engineered cementitious composite in bridges, Materials Science Forum, 860, 125-134. https://doi.org/10.4028/www.scientific.net/MSF.860.125
- Kwon, S.H., Kim, J.K. (2016). Understanding of drying shrinkage and autogeneous shrinkage in concrete, special articles, Magazine of the Korea Concrete Institute, 28(6), 22-26 [in Korean].
- Lee, H.B. (2014). Evaluation of residual stress using IITC of experimental stress analysis on concrete structure, KSCE Journal of Civil Engineering, 34(2), 415-424 [in Korean].
- Li, V.C. (2011). Engineered Cementitious Composites (ECC)-Material, Structural, and Durability Performance.
- Li, V.C., Fischer, G., Kim, Y.Y, Lepech, M., Qian, S., Weimann, M., Wang, S. (2003). Durable Link Slabs for Jointless Bridge Decks Base on Strain-Hardening Cementitious Composite, MODT Project, Michigan Department of Transportation, November 2003, FINAL REPORT.
- Mehta, P.K., Monteiro, P.J.M. (2014). Concrete, Microstructure Properties and Materials, Third edition, McGraw-Hill, NewYork.
- Mindess, S., Young, J.F., Darwin, D. (2003). Concrete, Second edition, Prentice Hall.
- Oluokun, F.A. (1991). Prediction of concrete tensile strength from its compressive strength evaluation relations for normal weight concrete, ACI Materials Journal, 88(3), 302-309.
- Park, S,G, (2017). Prediction and reduction technology of concrete shrinkage, Technology Lecture, Magazine of the Korea Concrete Institute, 29(6), 57-64 [in Korean].
- Ryu, D.Y., Park, J.J., Kim, S.W., Yoon, Y.S. (2011). Characteristics of early-age restrained shrinkage and tensile creep of ultra-high performance cementitious composites (UHPCC), Journal of the Korea Concrete Institute, 23(5), 581-590 [in Korean]. https://doi.org/10.4334/JKCI.2011.23.5.581
- Ryu, S.S. (2017). Effect of Pore Structures in Coarse Aggregate on the Shrinkage of Concrete, Ph.D Thesis, Joongbu University, Korea [in Korean].
- Shin, K.J., Lee, D,K,, Seo, D.W., Yoo, C.M., Lim, M.H., Lim, S.H. (2016). Setting estimation of cement paste using new-type embedded sensor, Journal of the Korean Recycled Construction Resources Institute, 4(4), 483-488 [in Korean]. https://doi.org/10.14190/JRCR.2016.4.4.483
- Son, S.W., Ahn, T.H., Jeon, Y.S., Ahn, S.K., Jung, S.H. (2015). Bleeding and setting time of concrete using modified fly ash, Korea Concrete Institute Spring Convention, 27(1), 577-578 [in Korean].
- Yang, S.C., Ahn, N.S., Choi, D.W., Kang, S.M. (2004). Drying shrinkage of concretes according to different volume-surface ratios and aggregate types, International Journal of Highway Engineering, 6(4), 109-121 [in Korean].
- Yoshitake, I., Rajabipour, F., Mimura, Y., Scanlon, A. (2012). A Prediction Method of Tensile Young's Modulus of Concrete at Early Age, Advances in Civil Engineering, Hindawi.
- Yu, K., Wang, Y., Yu, J., Xu, S. (2017). A strain-hardening cementitious composites with the tensile capacity up to 8%, Construction and Building Materials, 137, 410-419. https://doi.org/10.1016/j.conbuildmat.2017.01.060
- Yu, K., Wang, Y., Yu, J., Xu, S. (2017). Experimental study on crack bridging in engineered cementitious composites under fatigue tensile loading, Construction and Building Materials, 154, 167-175. https://doi.org/10.1016/j.conbuildmat.2017.07.193