Advances in concrete construction

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Compressive performance of RAC filled GFRP tube-profile steel composite columns under axial loads

  • Ma, Hui (School of Civil Engineering and Architecture, Xi'an University of Technology) ;
  • Bai, Hengyu (School of Civil Engineering and Architecture, Xi'an University of Technology) ;
  • Zhao, Yanli (School of Architecture, Chang'an University) ;
  • Liu, Yunhe (School of Civil Engineering and Architecture, Xi'an University of Technology) ;
  • Zhang, Peng (School of Civil Engineering and Architecture, Xi'an University of Technology)
  • Received : 2019.01.15
  • Accepted : 2019.09.15
  • Published : 2019.12.25
⟨ Previous Next ⟩

초록

To investigate the axial compressive performance of the recycled aggregate concrete (RAC) filled glass fiber reinforced polymer (GFRP) tube and profile steel composite columns, static loading tests were carried out on 18 specimens under axial loads in this study, including 7 RAC filled GFRP tube columns and 11 RAC filled GFRP tube-profile steel composite columns. The design parameters include recycled coarse aggregate (RCA) replacement percentage, profile steel ratio, slenderness ratio and RAC strength. The failure process, failure modes, axial stress-strain curves, strain development and axial bearing capacity of all specimens were mainly analyzed in detail. The experimental results show that the GFRP tube had strong restraint ability to RAC material and the profile steel could improve the axial compressive performance of the columns. The failure modes of the columns can be summarized as follow: the profile steel in the composite columns yielded first, then the internal RAC material was crushed, and finally the fiberglass of the external GFRP tube was seriously torn, resulting in the final failure of columns. The axial bearing capacity of the columns decreased with the increase of RCA replacement percentage and the maximum decreasing amplitude was 11.10%. In addition, the slenderness ratio had an adverse effect on the axial bearing capacity of the columns. However, the strength of the RAC material could effectively improve the axial bearing capacity of the columns, but their deformability decreased. In addition, the increasing profile steel ratio contributed to the axial compressive capacity of the composite columns. Based on the above analysis, a formula for calculating the bearing capacity of composite columns under axial compression load is proposed, and the adverse effects of slenderness ratio and RCA replacement percentage are considered.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China, Natural Science Basic Research Plan in Shaanxi Province of China, Department of Housing and Urbanrural Development of Shaanxi Province

참고문헌

  1. Cardoso, R., Silva, R.V., Brito, J. and Dhir, R. (2016), "Use of recycled aggregates from construction and demolition waste in geotechnical applications: a literature review", Waste. Manage., 49(3), 131-145. https://doi.org/10.1016/j.wasman.2015.12.021.
  2. Chen, Z.P., Xu, J.J., Chen, Y.L. and Su, Y.S. (2016), "Seismic behavior of T-shaped steel reinforced high strength concrete short-limb shear walls under low cyclic reversed loading", Struct. Eng. Mech., 57(4), 681-701. http://dx.doi.org/10.12989/sem.2016.57.4.681.
  3. Desprez, C., Mazars, J., Kotronis, P. and Paultre, P. (2013), "Damage model for FRP-confined concrete columns under cyclic loading", Eng. Struct., 48(3), 519-531. https://doi.org/10.1016/j.engstruct.2012.09.019.
  4. Eid, R. and Paultre, P. (2017), "Compressive behavior of FRP-confined reinforced concrete columns", Eng. Struct., 132(1), 518-530. https://doi.org/10.1016/j.engstruct.2016.11.052.
  5. Gulsan, M.E., Jawahery A, Mohammed S. and Alshawaf, A.H. (2018), "Rehabilitation of normal and self- compacted steel fiber reinforced concrete corbels via basalt fiber", Adv. Concrete Constr., 6(5), 423-463. https://doi.org/10.12989/acc.2018.6.5.423.
  6. Hadi, M.N.S., Wang, W. and Sheikh, M.N. (2015), "Axial compressive behaviour of GFRP tube reinforced concrete columns", Constr. Build. Mater., 81(15), 198-207. https://doi.org/10.1016/j.conbuildmat.2015.02.025.
  7. Hosseinpour, F. and Abdelnaby, A.E. (2017), "Fragility curves for RC frames under multiple earthquakes", Soil. Dyn. Earthq. Eng., 98(7), 222-234. https://doi.org/10.1016/j.soildyn.2017.04.013.
  8. Kara, I.F. (2016), "Flexural performance of FRP- reinforced concrete encased steel composite beams", Struct. Eng. Mech., 59(4), 775-793. https://doi.org/10.12989/sem.2016.59.4.775.
  9. Kelly A. and Mileiko S.T. (1983), Fabrication of Composites, Handbook of Composites, North-Holland.
  10. Li, P. and Wu, Y.F. (2015), "Stress-strain model of FRP confined concrete under cyclic loading", Compos. Struct., 134(15), 60-71. https://doi.org/10.1016/j.compstruct.2015.08.056.
  11. Liang, J.F., Wang, E., He, C.F. and Hu, P. (2018), "Mechanical behavior of recycled fine aggregate concrete after high temperature", Struct. Eng. Mech., 65(3), 343-348. https://doi.org/10.12989/sem.2018.65.3.343.
  12. Ma, H., Xue, J.Y., Liu, Y.H. and Dong, J. (2016), "Numerical analysis and horizontal bearing capacity of steel reinforced recycled concrete columns", Steel Compos. Struct., 22(4), 797-820. https://doi.org/10.12989/scs.2016.22.4.797.
  13. Mesbah, H.A. and Benzaid, R. (2017), "Damage-based stress- strain model of RC cylinders wrapped with CFRP composites", Adv. Concrete Constr., 5(5), 539-561. https://doi.org/10.12989/acc.2017.5.5.539.
  14. Mykolas, D., Juozas, V., Arturas, B., Tomas, S. and Marius, B. (2013), "Experimental investigation of the load carrying capacity of eccentrically loaded reinforced concrete elements strengthened with CFRP", Procedia Eng., 57(1), 232-237. https://doi.org/10.1016/j.proeng.2013.04.032.
  15. Rosado, L.P., Vitale, P., Penteado, C.S.G. and Arena, U. (2017), "Life cycle assessment of natural and mixed recycled aggregate production in brazil", J. Clean. Prod., 151(10), 634-642. https://doi.org/10.1016/j.jclepro.2017.03.068.
  16. Samaan, M. and Mirmiran, A. (1998), "Model of concrete confined by fiber composites", J. Struct. Eng., 124(9), 1025-1031. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:9(1025).
  17. Saravanakumar, P. and Dhinakaran, G. (2013), "Durability characteristics of recycled aggregate concrete", Struct. Eng. Mech., 47(5), 701-711. https://doi.org/10.1016/j.conbuildmat.2012.11.106.
  18. Senaratne, S., Lambrousis, G., Mirza, O., Tam, V.W.Y. and Kang, W.H. (2017), "Recycled concrete in structural applications for sustainable construction practices in Australia", Procedia Eng., 180, 751-758. https://doi.org/10.1016/j.proeng.2017.04.235.
  19. Tabsh, S.W. and Abdelfatah, A.S. (2009), "Influence of recycled concrete aggregates on strength properties of concrete", Constr. Build. Mater., 23(2), 1163-1167. https://doi.org/10.1016/j.conbuildmat.2008.06.007.
  20. Thomas, C., Setien, J., Polanco, J.A., Alaejos, P. and Juan, M. S.D. (2013), "Durability of recycled aggregate concrete", Constr. Build. Mater., 40(3), 1054-1065. https://doi.org/10.1016/j.conbuildmat.2012.11.106.
  21. Xiao, J.Z. and Huang, Y.J. (2012), "On the seismic behavior and damage assessment of recycled aggregate concrete filled GFRP tube column", China Civil Eng. J., 45(11), 112-120. (in Chinese)
  22. Xiao, J.Z., Li, W.G., Fan, Y.H. and Huang, X. (2012), "An overview of study on recycled aggregate concrete in China (1996-2011)", Constr. Build. Mater., 31(6), 364-383. https://doi.org/10.1016/j.conbuildmat.2011.12.074.
  23. Xiong, Z., Deng, J.P., Liu, F., Li, L.J. and Feng, W.X. (2018), "Experimental investigation on the behavior of GFRP- RAC-steel double-skin tubular columns under axial compression", Thin. Wall. Struct., 132(11), 351-360. https://doi.org/10.1016/j.tws.2018.08.026.
  24. Xu, J.J., Chen, Z.P., Xiao, Y., Demartino, C. and Wang, J.H. (2017), "Recycled aggregate concrete in FRP-confined columns: a review of experimental results", Compos. Struct., 174(15), 277-291. https://doi.org/10.1016/j.compstruct.2017.04.034.
  25. Youssef, M.A., Meshaly, M.E., Elansary, A.A., Youssef, M.A., Meshaly, M.E. and Elansary, A.A. (2017), "Ductile corrosion-free GFRP-stainless steel reinforced concrete elements", Compos. Struct., 182(9), 1-25. https://doi.org/10.1016/j.compstruct.2017.09.037.
  26. Yu M.H. (2004), Unified Strength Theory and its Applications, Springer-Verlag, Berlin, Heidelber.
  27. Zeng, J.J., Guo, Y.C., Gao, W.Y., Li, J.Z. and Xie, J.H. (2017), "Behavior of partially and fully FRP-confined circularized square columns under axial compression", Constr. Build. Mater., 152(10), 319-332. https://doi.org/10.1016/j.conbuildmat.2017.06.152.
  28. Zeng, L., Li, L.J., Su, Z. and Liu, F. (2018). "Compressive test of GFRP-recycled aggregate concrete-steel tubular long columns", Constr. Build. Mater., 176(7), 295-312. https://doi.org/10.1016/j.conbuildmat.2018.05.068.

피인용 문헌

  1. Axial compression performance of basalt-fiber-reinforced recycled-concrete-filled square steel tubular stub column vol.10, pp.6, 2019, https://doi.org/10.12989/acc.2020.10.6.559