Advances in concrete construction

  • 제8권4호
  • /
  • Pages.311-320
  • /
  • 2019
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Fire resistance evaluation of fiber-reinforced cement composites using cellulose nanocrystals

  • Lee, Hyung-Joo (Department of Architectural Engineering, Kumoh National Institute of Technology) ;
  • Kim, Seung-Ki (Department of Architectural Engineering, Kumoh National Institute of Technology) ;
  • Lee, Heon-Seok (Department of Architectural Engineering, Kumoh National Institute of Technology) ;
  • Kang, Yong-Hak (Daegu & Gyeongbuk Branch, Korea Conformity Laboratories) ;
  • Kim, Woosuk (Department of Architectural Engineering, Kumoh National Institute of Technology) ;
  • Kang, Thomas H.K. (Department of Architecture & Architectural Engineering, Seoul National University)
  • 투고 : 2019.04.18
  • 심사 : 2019.11.02
  • 발행 : 2019.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, the effect of cellulose nanocrystals (CNCs) on the fire resistance properties of fiber-reinforced cement composites was investigated. The main variables were CNCs content (0.4, 0.8 and 1.2vol.% compared with cement), steel fiber ratio, and exposure temperature (100, 200, 400, 600 and 800℃). The fire resistance properties, i.e., residual compressive strength, flexural strength, and porosity, were evaluated in relation with the exposure temperature of the specimens. The CNCs suspensions were prepared to composited dispersion method of magnetic stirring and ultra-sonication. CNCs are effective for increasing the compressive strength at high temperatures but CNCs do not seem to have a significant effect on flexural reinforcement. Porosity test result showed CNCs reduce the non-hydration area inside the cement and promote hydration.

키워드

과제정보

연구 과제 주관 기관 : Ministry of Land, Infrastructure and Transport

참고문헌

  1. Cao, Y., Zavaterri, P., Youngblood, P., Moon, R. and Weiss, J. (2105), "The influence of cellulose nano crystal additions on the performance of cement paste", Cement Concrete Compos., 56, 73-83. https://doi.org/10.1016/j.cemconcomp.2014.11.008
  2. Cao, Y., Zavaterri, P., Youngblood, P., Moon, R. and Weiss, J. (2016), "The relationship between cellulose nanocrystal dispersion and strength", Constr. Build. Mater., 119, 71-79. https://doi.org/10.1016/j.conbuildmat.2016.03.077
  3. Cavdar, A. (2012), "A study on the effects of high temperature on mechanical properties of fiber reinforced cementitious composites", Compos. Part B, 43, 2452-2463. https://doi.org/10.1016/j.compositesb.2011.10.005
  4. Chen, X. and Wu, S. (2013), "Influence of water-to-cement ratio and curing period on pore structure of cement mortar", Constr. Build. Mater., 38, 804-812. https://doi.org/10.1016/j.conbuildmat.2012.09.058
  5. Fu, T., Montes, F., Suraneni, P., Youngblood, J. and Weiss, J. (2017), "The influence of cellulose nanocrystals on the hydration and flexural strength of Portland cement paste", Polym., 9(9), 424. https://doi.org/10.3390/polym9090424
  6. Han, C.G., Han, M.C. and Heo, Y.S. (2008), "Spalling properties of high strength concrete mixed with various mineral admixtures subjected to fire", Int. J. Concrete Struct. Mater., 2(1), 41-48. https://doi.org/10.4334/ijcsm.2008.2.1.041
  7. Kang, S.M., Na, S.H., Kim, K.N. and Song, M.S. (2015), "Pore structure changes in hardened cement paste exposed to elevated temperature", J. Korea Ceram. Soc., 52(1), 48-55. https://doi.org/10.4191/kcers.2015.52.1.48
  8. Kim, T.S., Jung, S.H., Chae, S.T., Lee, B.C., Woo, Y.J. and Song, H.W. (2008), "An experimental study on the microstructure characteristics of cementitious composites by MIP", Proc. Korea Concrete Inst., 20(1), 533-536.
  9. Kim, W.S., Kang, T.H.-K. and Kim, W.J. (2014), "State-of-the-art research and experimental assessment on fire-resistance properties of high strength concrete", J. Korea Inst. Struct. Mainten. Inspect., 18(3), 28-39. https://doi.org/10.11112/jksmi.2014.18.3.028
  10. Lee, B.Y., Bang, J.W. and Kim, Y.Y. (2013), "Enhancing the performance of polypropylene fiber reinforced cementitious composite produced with high volume fly ash", J. Korea Inst. Struct. Mainten. Inspect., 17(3), 118-125. https://doi.org/10.11112/jksmi.2013.17.3.118
  11. Mazlan, D., Din, M.F.M., Tokoro, C. and Ibrahim, I.S. (2016), "Cellulose nanocrystals addition effects on cement mortar matrix properties", Int. J. Adv. Mech. Civil Eng., 3(3), 44-48.
  12. Mendes, A., Sanjayan, J.G., Gates, W.P. and Collins, F. (2012), "The influence of water absorption and porosity on the deterioration of cement paste and concrete exposed to elevated temperatures, as in a fire event", Cement Concrete Compos., 34, 1067-1074. https://doi.org/10.1016/j.cemconcomp.2012.06.007
  13. Norhasri, M.S.M, Hamidah, M.S. and Fadzil, A.M. (2017), "Applications of using nano material in concrete; A review", Constr. Build. Mater., 133, 91-97. https://doi.org/10.1016/j.conbuildmat.2016.12.005
  14. Oh, S.W., Jung, S.H., Chung, W.S. and Choi, Y.C. (2018), "Investigation of the effects of CNT dosages on the hydration and heating properties of cement composites with low water-to-binder ratio", J. Korea Inst. Struct. Mainten. Inspect., 22(6), 182-188. https://doi.org/10.11112/JKSMI.2018.22.6.182
  15. Oh, S.W., Oh, K.S., Jung, S.H., Chung, W.S. and Yoo, S.W. (2017), "Effects of CNT additions on mechanical properties and microstructures of cement", J. Korea Inst. Struct. Mainten. Inspect., 21(6), 162-168. https://doi.org/10.11112/jksmi.2017.21.6.162
  16. Ponikiewski, T., Katzer, J., Kilijanek, A. and Kuzminska, E. (2018), "Mechanical behaviour of steel fibre reinforced SCC after being exposed to fire", Adv. Concrete Constr., 6(6), 631-643. https://doi.org/10.12989/ACC.2018.6.6.631
  17. Seleem, H.E.D.H., Rashad, A.M. and Elsokary, T. (2011), "Effect of elevated temperature on physico-mechanical properties of blended cement concrete", Constr. Build. Mater., 25, 1009-1017. https://doi.org/10.1016/j.conbuildmat.2010.06.078
  18. Shaikh, F.U.A. and Taweel, M. (2015), "Compressive strength and failure behavior of fibre reinforced concrete at elevated temperatures", Adv. Concrete Constr., 3(4), 283-293. https://doi.org/10.12989/acc.2015.3.4.283
  19. Sofla, M.R.K., Brown, R.J., Tsuzuki, T. and Rainey, T.J. (2016), "A comparison of cellulose nanocrystals and cellulose nanofibres extracted from bagasse using acid and ball milling methods", Adv. Nat. Sci.: Nanosci. Nanotechnol., 7, 1-9.
  20. Tufail, M., Shahzada, K., Gencturk, B. and Wei, J. (2017), "Effect of elevated temperature on mechanical properties of limestone, quartzite and granite concrete", Int. J. Concrete Struct. Mater., 11(1), 17-28. https://doi.org/10.1007/s40069-016-0175-2

피인용 문헌

  1. Durable cement/cellulose nanofiber composites prepared by a facile approach vol.125, 2022, https://doi.org/10.1016/j.cemconcomp.2021.104321