Structural Monitoring and Maintenance

  • 제6권4호
  • /
  • Pages.269-289
  • /
  • 2019
  • /
  • 2288-6605(pISSN)
  • /
  • 2288-6613(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Behavior of reinforced concrete segmental hollow core slabs under monotonic and repeated loadings

  • Najm, Ibrahim N. (Civil Engineering Department, College of Engineering, Al-Nahrain University) ;
  • Daud, Raid A. (Civil Engineering Department, College of Engineering, Al-Nahrain University) ;
  • Al-Azzawi, Adel A. (Civil Engineering Department, College of Engineering, Al-Nahrain University)
  • 투고 : 2019.07.09
  • 심사 : 2019.12.02
  • 발행 : 2019.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

This study investigated experimentally the response of thick reinforced concrete specimens having hollow cores with critical parameters. The investigation includes testing of twelve specimens that are solid and hollow-core slab models. Each specimen consists of two pieces, the piece dimensions are (1.2 m) length, (0.3 m) width and (20 cm) thickness tested under both monotonic and repeated loading. The test program is carried out to study the effects of load type, core diameters, core shape, number of cores, and steel fiber existence. Load versus deflection at mid span, failure modes, and crack patterns were obtained during the test. The test results showed that core shape and core number has remarkable influenced on cracking pattern, ultimate load, and failure mode. Also, when considering repeated loading protocol, the ultimate load capacity, load at yielding, and ductility is reduced.

키워드

참고문헌

  1. ACI318-14, (2014), "Building Code Requirements for Structural Concrete and Commentary", American Concrete Institute, Detroit, U.S.A.
  2. AGENCY, F.E.M. (2007), Interm Testing Protocols for Determining the Seismic Performance Characteristics of Structural and Nonstructural Components, Federal Emergency Management Agency Washington, DC.
  3. Al-Azzawi, A. and Abdul Al-Aziz, B. (2017), "Numerical analysis of reinforced lightweight aggregate concrete hollow core slabs", ARPN J. Eng. Appl. Sci., 12(6), 1743-1757.
  4. Al-Azzawi, A. and Abdul Al-Aziz, B. (2018), "Behavior of reinforced lightweight aggregate concrete hollow-core slabs", Comput. Concrete, 21(2), 117-126. https://doi.org/10.12989/CAC.2018.21.2.117
  5. Al-Azzawi, A.A. and Abed, S.A. (2017), "Investigation of the behavior of reinforced concrete hollow-core thick slabs", Comput. Concrete, 19(5), 567-577. https://doi.org/10.12989/cac.2017.19.5.567
  6. Baran, E. (2015), "Effects of cast-in-place concrete topping on flexural response of precast concrete hollow-core slabs", Eng. Struct., 98, 109-117. https://doi.org/10.1016/j.engstruct.2015.04.017
  7. Baran, E. (2015), "Effects of cast-in-place concrete topping on flexural response of precast concrete hollow-core slabs", Eng. Struct., 98(1), 109-117. https://doi.org/10.1016/j.engstruct.2015.04.017
  8. Brunesi, E., Bolognini, D. and Nascimbene, R. (2014), "Evaluation of the shear of precast-prestressed hollow core slab: numerical and experimental comparison", Mater. Struct., 48(5), 1503-1521. https://doi.org/10.1617/s11527-014-0250-6
  9. Celal, M.S. (2011), "Shear Behavior of Precast/Prestressed Hollow-Core Slabs," M.Sc. Thesis, Department of Civil Engineering, University of Manitoba, Winnipeg, Manitoba.
  10. Cuenca, E. and Serna, P. (2013), "Failure modes and shear design of prestressed hollow core slabs made of fiber-reinforced concrete", Compos. Part B, 45, 952-964. https://doi.org/10.1016/j.compositesb.2012.06.005
  11. Dudnik, V.S., Milliman, L.R. and Parra-Montesinos, G.J. (2017), "Shear behavior of prestressed steel-fiber-reinforced concrete hollow-core slabs", PCI J., 62(4), 58-72.
  12. Kankeris, P. and Prakash, S. (2016), "Experimental evaluation of bonded overlay and NSM GFRP bar strengthening on flexural behavior of precast prestressed hollow core slabs", Eng. Struct., 120(1), 49-57. https://doi.org/10.1016/j.engstruct.2016.04.033
  13. Lee, D.H., Park, M.K., Oh, J.Y., Kim, K.S., Im, J.H. and Seo, S.Y. (2014), "Web-shear capacity of prestressed hollow-core slab unit with consideration on the minimum shear reinforcement requirement", Comput. Concrete, 14(3), 211-231. https://doi.org/10.12989/cac.2014.14.3.211
  14. Prakashan, L.V., George, J., Edayadiyil, J.B. and George, J.M. (2017), "Experimental study on the flexural behavior of hollow core concrete slabs", Appl. Mech. Mater., 857, 107-112. https://doi.org/10.4028/www.scientific.net/AMM.857.107
  15. Rahman, M.K., Baluch, M.H., Said, M.K. and Shazali, M.A. (2012), "Flexural and shear strength of prestressed precast hollow-core slabs", Arabian J. Sci. Eng., 37(2), 443-455. https://doi.org/10.1007/s13369-012-0175-8
  16. Wariyatno, N.G., Haryanto ,Y. and Sudiboyo, G.H. (2017), "Flexural behavior of precast how core slab using PVC pipe and Styrofoam with different reinforcement", Procedia Eng., 171, 909-916. https://doi.org/10.1016/j.proeng.2017.01.388
  17. Yousif, N.S., Jarallah, H. Kh. And Abdul Kareem, H.I. (2018), "Improving the shear strength of lightweight RC thick hollow core slab made of recycled materials", Int. J. Eng. Technol., 7(4.20), 403-407.