Smart Structures and Systems

  • 제23권1호
  • /
  • Pages.61-69
  • /
  • 2019
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Quasi real-time and continuous non-stationary strain estimation in bottom-fixed offshore structures by multimetric data fusion

  • Palanisamy, Rajendra P. (Department of Civil and Environmental Engineering, Michigan State University) ;
  • Jung, Byung-Jin (Ocean Science and Technology School, Korea Maritime and Ocean University) ;
  • Sim, Sung-Han (School of Urban and Environmental Engineering, Ulsan National Institute of Science and Technology (UNIST)) ;
  • Yi, Jin-Hak (Ocean Science and Technology School, Korea Maritime and Ocean University)
  • 투고 : 2018.06.25
  • 심사 : 2019.01.13
  • 발행 : 2019.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

Offshore structures are generally exposed to harsh environments such as strong tidal currents and wind loadings. Monitoring the structural soundness and integrity of offshore structures is crucial to prevent catastrophic collapses and to prolong their lifetime; however, it is intrinsically challenging because of the difficulties in accessing the critical structural members that are located under water for installing and repairing sensors and data acquisition systems. Virtual sensing technologies have the potential to alleviate such difficulties by estimating the unmeasured structural responses at the desired locations using other measured responses. Despite the usefulness of virtual sensing, its performance and applicability to the structural health monitoring of offshore structures have not been fully studied to date. This study investigates the use of virtual sensing of offshore structures. A Kalman filter based virtual sensing algorithm is developed to estimate responses at the location of interest. Further, this algorithm performs a multi-sensor data fusion to improve the estimation accuracy under non-stationary tidal loading. Numerical analysis and laboratory experiments are conducted to verify the performance of the virtual sensing strategy using a bottom-fixed offshore structural model. Numerical and experimental results show that the unmeasured responses can be reasonably recovered from the measured responses.

키워드

과제정보

연구 과제번호 : Development of active-controlled tidal stream generation technology

연구 과제 주관 기관 : Ministry of Oceans and Fisheries, KIOST

참고문헌

  1. BMT Fleet Technology Ltd. (2013), Fatigue design review of offshore wind turbine generator structures, Final Report.
  2. Cho S., Park, J.P., Palanisamy R.P. and Sim, S.H. (2016), "Reference-free displacement estimation of bridges using Kalman filter-based multimetric data fusion", J. Sensors, Article ID 3791856.
  3. Cho S., Sim, S.H., Park, J.P. and Lee, J. (2014), "Extension of indirect displacement estimation method using acceleration and strain to various types of beam structures", Smart Struct. Syst., 14 (4), 699-718. https://doi.org/10.12989/sss.2014.14.4.699
  4. Crassidis, J.L. and Junkins, J.L. (2012), Optimal estimation of dynamic systems. Second edition, CPC press, Taylor & Francis Group, ISBN -13: 978-1-4398-3986-7.
  5. EWEA (2015), Aiming high rewarding ambition in wind energy. The European Wind Energy Association.
  6. Iliopoulos, A.N., Devriendt, C., Guillaume, P. and Van Hemelrijck, D. (2014), "Continuous fatigue assessment of an offshore wind turbine using a limited number of vibration sensors", Proceedings of the 7th European Workshop on Structural Health Monitoring, July 8-11, 2014. La Cite, Nantes, France.
  7. Iliopoulos, A.N., Weijtjens, W., Van Hemelrijck, D. and Devriendt, C. (2015), "Prediction of dynamic strains on a monopile offshore wind turbine using virtual sensors", J. Phys.: Conference Series, 628, 012108 https://doi.org/10.1088/1742-6596/628/1/012108
  8. Iliopoulos, A.N., Weijtjens, W., Van Hemelrijck, D. and Devriendt, C. (2017), "Fatigue assessment of offshore wind turbines on monopile foundations using multi-band modal expansion", Wind Energy, 20(8), 1463-1479. https://doi.org/10.1002/we.2104
  9. Jo, H. and Spencer, B.F. (2014), "Multimetric model based structure health monitoring", Proceedings of the SPIE, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2014, San Diego, California, USA, March.
  10. Kalman, R.E. (1960), "A new approach to linear filtering and prediction problem", J. Basic Eng., 82(1), 35-45. https://doi.org/10.1115/1.3662552
  11. Lee J.H. and Kim. S.C. (2016), "Mobile technology in the field data collection and management", J. Struct. Integrity Maint., 1(3), 140-145. https://doi.org/10.1080/24705314.2016.1211233
  12. Liu, L., Zhu, J., Su, Y. and Lei, Y. (2016), "Improved Kalman filter with unknown inputs based on data fusion of partial acceleration and displacement measurements", Smart Struct. Syst., 17(6), 903-915. https://doi.org/10.12989/sss.2016.17.6.903
  13. Lourens, E., Papadimitriou, C., Gillijns, S., Reynders, E., DeRoeck, G. and Lombaert, G. (2012), "Joint input-response estimation for structural systems based on reduced-order models and vibration data from a limited number of sensors", Mech. Syst. Signal Pr., 29, 310-327. https://doi.org/10.1016/j.ymssp.2012.01.011
  14. Maes, K., Iliopoulos, A., Weijtjens, W., Devriendt, C. and Lombaert, G. (2016), "Dynamic strain estimation for fatigue assessment of an offshore monopile wind turbine using filtering and modal expansion algorithms", Mech. Syst. Signal Pr., 76-77, 592-611. https://doi.org/10.1016/j.ymssp.2016.01.004
  15. Maes, K., Smyth, A. W., De Roeck, G. and Lombaert, G. (2015), "Joint input-state estimation in structural dynamics", Mech. Syst. Signal Pr., 70-71, 445-466. https://doi.org/10.1016/j.ymssp.2015.07.025
  16. Palanisamy, R.P., Cho, S., Kim, H. and Sim, S.H. (2015), "Experimental validation of Kalman filter-based strain estimation in structures subjected to non-zero mean input", Smart Struct. Syst., 15(2), 489-503. https://doi.org/10.12989/sss.2015.15.2.489
  17. Papadimitriou, C., Fritzen, C.P., Kraemer, P. and Ntotsios, E. (2010), "Fatigue predictions in entire body of metallic structures from a limited number of vibration sensors using Kalman filtering", Struct. Control Health Monit., 18(5), 554-573. https://doi.org/10.1002/stc.395
  18. Park, J.W., Sim, S.H. and Jung, H.J. (2013), "Displacement estimation using multimetric data fusion", IEEE/ASME T. Mechatron., 18(6), 1675-1682. https://doi.org/10.1109/TMECH.2013.2275187
  19. Park, J.W., Sim, S.H. and Jung, H.J. (2014), "Wireless displacement sensing system for bridges using multi-sensor fusion", Smart Mater. Struct., 23(4).
  20. Paust, H.S. (2015), Finite element modeling and structural state estimation of a bottom fixed offshore wind turbine, M.S. thesis, Norwegian University of Science and Technology.
  21. Ren, P. and Zhou, Z. (2014), "Strain response estimation for the fatigue monitoring of an offshore truss structure", Pacific Sci. Rev., 16, 29-35. https://doi.org/10.1016/j.pscr.2014.08.005
  22. Sim, S.H. (2016), "Estimation of flexibility matrix of beam structures using multisensor fusion", J. Struct. Integrity Maint., 1(2), 60-64. https://doi.org/10.1080/24705314.2016.1179494
  23. Van der Male, P. and Lourens, E. (2014), "Operational vibrationbased response estimation for offshore wind lattice structures", Proceedings of the International Modal Analysis Conference.
  24. Yeter, B., Garbatov, Y. and Guedes Soares, C. (2015), "Fatigue damage assessment of fixed offshore wind turbine tripod support structures", Eng. Struct., 101, 518-528. https://doi.org/10.1016/j.engstruct.2015.07.038